Thermal coefficient of linear expansion of non-crystalline chalcogenides in the As-S-Se-Te-I system

The object of the paper is an investigation of the glasses of the (As₂S₃)_x(AsSe_0.5Te_0.5I)_100-x. type for 65≤;x≤;95, using methods of thermomechanical analysis. Values of the thermal coefficients of linear expansion in solid and visco-plastic phase were determined. it was shown that introducing arsenic-sulfide in glass-matrix AsChI, i.e. (AsSe_0.5Te_0.5I), leads to an increasing stability of these glasses. The characteristic temperatures of softening Tg and the temperature of the beginning of deformation t_w increase by increasing content of As₂S₃. The analytical forms of dependence of four significant physical values α_g, α_l, Tg, Tw, as a function of As₂S₃ content in the structure of glasses were fitted. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal evolution of ferromagnetic metallic glasses

A traditional TG apparatus was modified by placing two permanent magnets producing a controlled magnetic field (TG(M): Magneto Thermogravimetry). This technique proved to be useful to study both structural relaxation and crystallisation of ferromagnetic metallic glasses. Results obtained for the amorphous alloys Fe₄₀Ni₄₀P₁₄B₆ and Fe_62.5Co₆Ni_7.5Zr₆Nb₂Cu₁B₁₅, are reported in this paper. Structural relaxation can be evaluated by measuring changes in Curie temperature induced by thermal treatments. Crystallisation in TG(M) is detected through a change in the measured apparent mass (difference between the sample mass and magnetic force driving it upward). These results were confirmed by DSC analysis. Whether the obtained crystalline phase is ferromagnetic, it can be identified through its Curie temperature, measured by TG(M). In fact the value of 770°C measured as Curie temperature of crystallised Fe_62.5Co₆Ni_7.5Zr₆Nb₂Cu₁B₁₅led to conclude that the only ferromagnetic crystalline phase is a-Fe. These hypothesis was confirmed by XRD analysis, showing that the first crystallisation yields to a-Fe nanocrystals. This revised version was published online in July 2006 with corrections to the Cover Date.     

方波伏安法测定镍铜合金中的镍含量

在0.01mol·L-1的氨水-氯化铵缓冲溶液(pH 9.3)中,镍(Ⅱ)于-1.25V(vs.SCE)出现一灵敏的方波伏安峰。镍(Ⅱ)浓度在1.5×10-6～1.0×10-4mol·L-1与伏安峰高呈线性关系,线性方程为ip(μA)=2.1870+0.6328c(μmol·L-1),相关系数为0.9991。方法的标准偏差为0.7％。该法应用于镍铜合金样品中镍的测定,结果满意。     

铜铝合金中γ_2相沉淀的分析电镜研究

Cu-12.7(wt)%Al合金从900℃高温淬至365℃～500℃温度范围等温不同时间(30秒至15分钟)的试样中形成了大量树枝状的γ_2相沉淀粒子。应用配有X线能谱仪(XEDS)和电子能量损失谱仪(EELS)的分析电子显微镜(JEOL JEM-2000FX型)对上还试样研究,结果表明:这些γ_2相粒子具有富铝的“核心”,长大到粒子线度大于约800nm后以不稳定方式生长成“花朵”状。生长过程中伴随着溶质元素Al由基体向γ_2相内的富集。而且在γ_2相粒子内部呈现出Spinodal分解组织的形貌特征,表明γ_2粒子内形成了化学成分调幅。EELS分析表明试样含氧。     

Mg-Nd-Zr-Zn合金的制备及钕对合金组织性能的影响

在RJ-2溶剂和Be的联合保护下制备了Mg-Nd-Zr-Zn系合金. 通过对合金组织的分析, 以及Nd对组织性能影响的研究, 试制出了Nd添加量合理的Mg-Nd-Zr-Zn合金. 经过测试, 认为Nd添加量的增加提高了合金的250 ℃高温抗拉强度, 当Nd添加量超过2.8%时, 合金的高温强化作用不十分显著. Mg-Nd-Zr-Zn合金在250 ℃时的拉伸断裂方式主要是韧性断裂.     

(TiNi)_x(x=2~4)团簇结构和电子结构

从团簇角度对TiNi形状记忆合金进行了量子化学从头算研究。设计并优化了等原子比(TiNi)x(x=2~4)簇的多种可能几何结构,并对较稳定构型进行电子结构的分析。结果表明,等原子比的(TiNi)n团簇以TiNi成键为主要分子骨架,小团簇有较多能量接近的异构体,TiTi成键对能量降低有较大贡献。     

非晶态合金催化剂用于二甲基紫脲酸加氢反应

二甲基紫脲酸加氢反应;nicob/白炭黑催化剂;非晶态合金催化剂     

铝钛合金溴化物对直链烷烃异构化反应的催化作用

首次研究了铝铁合金溴化物的合成及其对直链烷烃异构化反应的催化作用,讨论了正戊烷的异构化反应,得到其动力学方程为1nC/C_0=-0.50t,表观活化能为26.3 kJ/moJ,测定了正己烷、正庚烷、正辛烷在不同溶剂中、不同温度下催化异构化反应的动力学曲线,为铝铁合金溴化物的工业应用提供了理论依据。     

Electrodeposited Nickel/Platinum Alloy as a Biosensor for Acetyl Choline

Nickel and platinum find extensive use in preparation of biosensors. In the present work, Ni/Pt alloy was plated on graphite to make acetylcholine sensor. The microstructure, surface composition and electrochemical performance of the electrode was analyzed by different techniques. The sensing performance was evaluated by cyclic voltammetry. The prepared alloy plate exhibited very good linear relationship between acetyl choline concentration and response current. The sensitivity and reproducibility of the prepared electrode were found better than other nickel electrodes reported.     

反对数微分简易示波伏安法的研究

在获得微分简易地波伏安图的实验线路中,增加了反对数装置,提出了反对数微分简易示波伏安法。该方法被应用于铝合金中微量铜和分子筛中微量钴的测定,获得了满意结果。