原子簇NixFe和NiFex(x=1-5)电子性质的DFT研究

More than one hundred models were designed to reflect the local structure and electronic property of Ni-Fe amorphous alloys. After calculating by DFF method, a series of configurations of clusters NixFe and NiFex （x = 1 - 5） were gained. The configurations, which possessed the lowest energies and non-imaginary frequencies, were considered the most stable optimized structures. The catalytic activity, charge and magnetic properties were analyzed and discussed. The different Fe content changed the catalytic properties of clusters through altering the value of Fermi level of every cluster. However the density of state （DOS） nearby Fermi level and average 3d orbital population of atom Ni, which were also important properties related to the catalytic activation, were little changed. Based on the Fermi level, the activity of catalyst toward hydrogenation reaction would be considered best when the ratio of Ni to Fe was close to 1. The Fermi level of clusters was far distant to the level of nitrogen in singlet state. It would be the reason why the reaction condition in ammonia synthesis and nitrogen fixation process was rigorous. When Fe atom contents were higher than 75% （NiFe3）, the electrons transferred from atom Fe to Ni, but when the ratio was decreased, the transfer was reversed. The ratio of atoms of local structure also played an important role in the aspect of electron transition. On the average 3d orbital population of atom Fe, the average magnetic moments of Fe atoms in clusters were calculated. When Fe atom contents were 50% nearly, the average magnetic moment achieved the highest point.     

碳管笼烯的稳定性问题

碳笼烯C_(60)及C_(70)等的发现启示人们去探索合成更多的新型封闭型碳烯化合物,可以设想,由六元碳环构成的石墨层平面可以卷成顶和底为p元环、侧面为紧接着顶底的p个五元环、中间k层p个六元环围成的碳管笼烯C_n(n=2p(k+2)),其结构见图1。笼烯的每个C原子都与3个相邻的C原子成键,并有一个与笼面垂直的单电子占据轨道,可以相互作用构成笼面共轭大π键。我们在     

新颖五核Mo/Cu/S簇合物[MoOS3Cu4(α-MePy)6Br2]的合成及晶体结构

杂核金属含硫簇合物具有丰富的结构,在生物化学、催化和非线性光学等方面显示了诱人的应用前景.近年来,我们主要从事用[MS4 ]2 - 和[Cp* MS3]- ( M=Mo,W)和Cu( ) ,Ag( )反应合成Mo( W) /Cu( Ag) /S簇合物并研究其非线性光学性质[1,2 ] .鉴于用硫代金属酸盐作前驱体合成M- Cu- Ag- S杂三核金属簇合物的工作鲜有报道[3] ,我们尝试用( NH4 ) 2 Mo OS3和Cu Br,Ag Br在α- Me Py中反应,希望得到Mo- Cu- Ag- S杂三核金属簇合物.但上述反应却形成了1个仅含Mo和Cu( )的五核簇合物[Mo OS3Cu4 (α- Me Py) 6 Br2 ],其所含的Mo S3…     

Pdn(n=2～13)团簇的密度泛函理论研究

采用密度泛函理论B3LYP方法计算并讨论钯原子团簇Pdn(n=2～13)结构模型.通过对钯原子团簇进行几何构型优化和振动频率计算,找出团簇总能量最低的同分异构体.由于Jahn-Teller效应的存在,团簇的最稳定结构采取对称性较低的几何构型.在钯原子数相同时,往往存在多个能量极为相近的稳定构型.单位原子平均静态极化率呈奇偶变化.     

簇合物[Et4N]2[Mo2S4(SCH2CH2S)2]的合成及其结构研究

以(NH4)2MoS4,Et4NBr,HSCH2CH2SH为原料,合成出[Et4N]2[Mo2S4(SCH23CH2S)2]簇合物,用X射线衍射法测定了晶胞结构.其晶胞参数为a=1.0304(8)nm,b=1.4158(8)nm,c=1.1417(1)nm,V=1.63801nm3,Z=4,晶体属单斜晶系,晶体结构经块状矩阵最小二乘法修正后,最终偏离因子R=0.089.此外还进行了红外光谱,紫外可见光谱的测定.     

四核铜原子簇化合物Cu4(c-C6H11CSS2)4的合成和结构研究

环己基甲荒酸六氢吡啶盐与氯化铜反应,产物经二硫化碳重结晶,得四核铜原子簇化合物Cu_4(c-C_6H_(11)CSS_2)_4,用X射线单晶衍射法测定了它的晶体结构,其空间群为C_(4h)~4-P4_2/n晶胞参数a=b=15.125(5)(?),c=8.514(2)(?),α=β=γ=90°,V=1948(1)(?)~3,Z=2,929个衍射点参与修正,R=0.040.分子中Cu_4呈变形四面体构型。产物形成时,c-C_6H_(11)CSS~-与Cu~(2+)有氧化-还原反应发生。文章对产物形成的机理作了探讨。     

簇合物中锥形四重桥硫3d轨道成键的EHMO研究

运用EHMO方法对四个[M_4S_2]（M＝Co，Nb）型簇合物的电子结构进行了计算，通过对硫原子3d轨道引入前后体系总能量、轨道能级、电荷分布和Mulliken键级等性质的比较，发现簇合物中锥形四重桥硫原子的3d轨道参与了成键，对稳定[M_4S_2]结构单元有重要的作用．     

(S2W(μ-S)2OW(μ-S)2WS2]2-的合成和性质研究

本文提出在酸性水溶液中,合成钨硫原子簇状化合物[(n-Bu)_4N]_2[S_2W(μ-S)_2OW(μ-S)_2WS_2]和的新方法,并进行了化学分析和红外光谱、电子光谱的测定。     

钯团簇形成和增长机理的Monte Carlo研究

利用Monte Carlo（MC）方法和Lennard-Jones加Axilord-Teller （LJ＋AT）势能函数,研究了气相中钯团簇的形成过程和增长机理.发现具有二十面体结构的Pd13团簇可以在气相中自发形成,较大的团簇通过在Pd13二十面体结构的表面添加原子组成四面体的方式形成.通过分析团簇结构和能量之间的关系,发现除了Pd13和Pd55以外,Pd19和Pd39团簇也具有五次对称性,都是比较稳定的结构.     

Mo(W)-Cu(Ag)-S原子簇化合物的研究现状

本文在研究Ｍｏ（Ｗ）－Ｃｕ（Ａｇ）－Ｓ原子簇化合物的低热固态合成化学基础上，详细地对该类簇合物进行了归纳，从中提出；１，ＭＯ４－ｎＳｎ＾２＾－（Ｍ＝Ｍｏ，Ｗ；ｎ＝２，３，４）作为配体中心。２，氧原子在簇合物中仅作为端基，不参与同其他金属成键。３，单个ＭＳ４（Ｍ＝Ｍｏ，Ｗ）基团最多只能键合六个Ｃｕ（Ａｇ）原子，即最大核数为七。４，迄今为止所有Ｍｏ（Ｗ）－Ｃｕ－Ｓ原子簇化合物中Ｃｕ均为＋１价。５，预计