围长为2的本原无限布尔方阵类的本原指数集

研究了围长为2的无限布尔方阵的本原性,通过无限有向图D（A）的直径给出了这类矩阵的本原指数的上确界,最后证明了直径小于等于d且围长为2的本原无限布尔方阵所构成的矩阵类的本原指数集为Ed^0={2,3,…,3d}．     

带弦圈的最小2宽直径

设k为正整数,G是简单k连通图.图G的k宽直径,dk(G),是指最小的整数ι使得对任意两不同顶点x,y∈V(G),都存在k条长至多为ι的内部不交的连接x和y的路.用C(n,t)表示在圈Gn上增加t条边所得的图.定义h(n,t):min{d2(C(n,t))}.本文给出了h(n,2)=[n/2].而且,给出了当t较大时h(n,t)的界.     

4度循环图的不交路及k-宽直径

研究了4度循环图,构造出其任意两点之间的四条内部点不交路,并且给出其宽直径的一个较好的上界。     

周期性变电场下熔体静电纺丝射流的介观模拟

利用介观模拟的耗散粒子动力学法, 对纺丝射流稳定直线段区域进行变电场模拟, 并以三维的射流路径呈现出来. 研究了不同控制频率下的变电场对聚合物分子链的运动情况、 射流直径及下落行为的影响. 结果表明, 与稳定电场相比, 周期性改变电场能够有效提高分子链的拉伸, 使射流直径减小, 较低的控制频率能够加速射流的下落, 从而获得较细的纤维.     

Synthesis of multi-walled carbon nanotubes using CoMnMgO catalysts through catalytic chemical vapor deposition

The Co Mg O and Co Mn Mg O catalysts are prepared by a co-precipitation method and used as the catalysts for the synthesis of carbon nanotubes（CNTs） through the catalytic chemical vapor deposition（CCVD）. The effects of Mn addition on the carbon yield and structure are investigated. The catalysts are characterized by temperature programmed reduction（TPR） and X-ray diffraction（XRD） techniques, and the synthesized carbon materials are characterized by transmission electron microscopy（TEM） and thermo gravimetric analysis（TG）. TEM measurement indicates that the catalyst Co Mg O enclosed completely in the produced graphite layer results in the deactivation of the catalyst. TG results suggest that the Co Mn Mg O catalyst has a higher selectivity for CNTs than Co Mg O. Meanwhile, different diameters of CNTs are synthesized by Co Mn Mg O catalysts with various amounts of Co content, and the results show that the addition of Mn avoids forming the enclosed catalyst, prevents the formation of amorphous carbon, subsequently promotes the growth of CNTs, and the catalyst with decreased Co content is favorable for the synthesis of CNTs with a narrow diameter distribution.The Co Mn Mg O catalyst with 40% Co content has superior catalytic activity for the growth of carbon nanotubes.     

不同直径液滴撞击亲水壁面动态特性实验研究

本文通过可视化实验研究了不同直径液滴撞击亲水壁面的动态特性.实验利用光学原理同时记录了液滴撞击壁面过程的正面及底面图像。实验结果表明:液滴最大铺展因数随液滴初始直径近似呈线性增长关系;随液滴直径增大,液滴铺展至最大时需要的绝对时间、滞留时间、回缩时间均增长,稳定时的液固接触面积变大;液滴铺展至最大铺展因数所需要的无量纲时间约为1.68;液滴直径越小,则撞击后液膜回缩更为迅速.     

电大开孔箱体屏蔽效能分析解析模型

电磁脉冲武器能够通过"前、后门"耦合效应对箱体内部电子元器件及电路板造成损伤,从而对电气电子设备的安全性构成严重威胁,因此,开展箱体电磁屏蔽效能的分析研究具有重要意义.推导了任意入射波条件下电大开孔箱体屏蔽系数的解析解,并在此基础上对箱体屏蔽效能进行了分析研究.首先通过矢量分解,得出任意入射平面波的坐标分量;再基于Cohn模型,获得了电大开孔的等效电偶、磁偶极子;然后通过镜像原理,计算出总的赫兹电矢量位、磁矢量位;最终求得电大开孔箱体内部任意观测点的电场解析解,用于箱体屏蔽系数计算.设计了5组验证性实验,仿真结果表明:该解析算法相对CST的均方误差为11.565 d B,绝对误差为8.015 d B,相关系数为0.921,从而验证了该算法的准确性;解析算法仿真的平均耗时为0.183 s,仅占CST耗时的1/7530,从而验证了该算法的高效性.     

离子型表面活性剂对双重乳粒分散性能的影响

为了改善臭氧处理PS单层球与PVA溶液生成的双重乳粒在油相中的分散性,采用了低分子量阴离子型表面活性剂十二烷基硫酸钠(SDS)和十二烷基苯磺酸钠(SDBS)及高分子量混合型表面活性剂十八烷基胺聚氧乙烯醚双季铵盐(PAVDA)来改性该种PS单层球,测试并分析了不同表面活性剂对相应薄膜亲水接触角及其对PVA吸附速率的影响,同时也考察并对比了静电排斥作用和空间位阻作用对双重乳粒分散性的影响。实验结果表明这三种表面活性剂均能不同程度的改善双重乳粒在油相中的分散性。其中,经SDS和SDBS处理后,双重乳粒在油相中固化时会发生絮凝作用而无法以较高成活率制得大尺寸双层球;经PAVDA处理PS单层球后,实现了以较高的成活率制得700~900μm的PS-PVA双层空心微球。同时,也表明在改善PS单层球的分散性方面,空间位阻稳定作用较静电排斥作用更为有效。     

Influence of screw length and diameter on tibial strain energy density distribution after anterior cruciate ligament reconstruction

Postoperative tunnel enlargement has been frequently reported after anterior cruciate ligament（ACL）reconstruction.Interference screw,as a surgical implant in ACL reconstruction,may influence natural loading transmission and contribute to tunnel enlargement.The aims of this study are（1）to quantify the alteration of strain energy density（SED）distribution after the anatomic single-bundle ACL reconstruction;and（2）to characterize the influence of screw length and diameter on the degree of the SED alteration.A validated finite element model of human knee joint was used.The screw length ranging from 20 to 30 mm with screw diameter ranging from 7 to 9 mm were investigated.In the post-operative knee,the SED increased steeply at the extra-articular tunnel aperture under compressive and complex loadings,whereas the SED decreased beneath the screw shaft and nearby the intra-articular tunnel aperture.Increasing the screw length could lower the SED deprivation in the proximal part of the bone tunnel;whereas increasing either screw length or diameter could aggravate the SED deprivation in the distal part of the bone tunnel.Decreasing the elastic modulus of the screw could lower the bone SED deprivation around the screw.In consideration of both graft stability and SED alteration,a biodegradable interference screw with a long length is recommended,which could provide a beneficial mechanical environment at the distal part of the tunnel,and meanwhile decrease the bone-graft motion and synovial fluid propagation at the proximal part of the tunnel.These findings together with the clinical and histological factors could help to improve surgical outcome,and serve as a preliminary knowledge for the following study of biodegradable interference screw.     

大气湍流对航空光电侦察图像质量影响因素分析北大核心CSCD

大气湍流效应是严重影响航空光电侦察系统图像质量的重要因素之一。从大气湍流参数描述出发,研究了大气湍流对光学系统成像质量的影响机理,分析了大气湍流影响光学系统调制传递函数(modulation transfer function,MTF)的影响因素,建立了大气湍流影响光学系统成像MTF的理论模型。仿真结果表明,在大气湍流影响下,光学系统光瞳口径与大气相干直径的比值对光学系统成像MTF影响较大。通过光学系统地面外场实验图像测试对比,验证了实际光学系统受到大气湍流影响后的成像MTF理论模型。研究结果可为大气湍流影响下的航空光电侦察系统设计及提升其成像质量提供理论支持。