两亲性嵌段聚合物的同步辐射小角x射线散射研究

应用同步辐射小角x射线散射(SAXS)方法研究了不同聚合条件下苯乙烯对乙烯基苯甲酸两亲性嵌段聚合物的聚集行为,结果发现该聚合物在选择性溶液中自组装形成胶束.胶束的形态和结构取决于嵌段聚合物的组成、浓度以及溶剂的性质等因素 关键词： 小角x射线散射 两亲性嵌段聚合物 分形维数 粒径     

Sn-C60薄膜的紫外吸收光谱和X-射线衍射谱分析

对Sn-C60薄膜进行紫外可见光吸收，X-射线衍射和扫描电镜的测定结果显示，薄膜样品紫外可见光吸收的两个短波段吸收峰比纯C60薄膜的吸收峰显著下降，说明Sn-C60薄膜的电子光吸收跃迁为间接跃迁，能带中有杂质能级的存在；样品的X射线衍射峰则对应于面心立方结构；扫描电镜结果显示薄膜为纳米级颗粒组成。     

Spectrum Simulation of Li-Like Aluminium Plasma

X-ray emission spectra for L-shell of Li-like aluminium ions are simulated by using the flexible atomic code based on the collisional radiative model. Atomic processes including radiative recombination, dielectronic recombination, collisional ionization and resonance excitation from the neighbouring ion （Al^9＋ and Al^11＋ ） charge states of the target ion （Al^10＋） are considered in the model. In addition, the contributions of different atomic processes to the x-ray spectrum are analysed. The results show that dielectronic recombination, radiative recombination, collisional ionization and resonance excitation, other than direct collisional excitation, are very important processes.     

吸积盘的X射线辐射对周围星际物质的离化研究

利用辐射流体力学程序对三倍频纳秒激光与靶物质相互作用进行了模拟研究，得到了可以产生黑体辐射谱分布的激光等离子体X射线辐射靶的最佳厚度；数值模拟研究了黑体谱分布的X射线辐射场对等离子体系统平均离化度分布的影响，它有助于深入理解天体物理中吸积盘对它周围星际物质的离化影响. 关键词： 辐射流体力学 激光等离子体 X射线辐射 吸积盘 离化     

Practical absorption limits of MPP absorber

The construction and properties of microperforated panel (MPP) absorber are discussed. The absorption limit of the absorber had been shown that low values of the perforate constant k = d(f/10)1/2 and the orifice diameter d (in mm) are essential for MPP to have high absorption in wide frequency band. To find the exact limits, take 1 for k as a start, because both specific resistance and high absorption require k around one. And the orifice diameter d is chosen as 0.1 mm, so that the peak absorption coefficient (resonance absorption) is at 1000 Hz, and high sound frequency may be in the absorption region. Is it possible for a single layer of such an MPP to cover the whole absorption region required in practice? The half-absorption limit is not a good criterion, because low absorption comes in also in some cases. The 0.5 absorption coefficient limit is suggested for practical region, as a standard for comparison. Absorption curves were drawn for different load resistances, of absorption coefficients versus frequency. Ordinary MPP absorber absorbs in slightly over two octaves, and the new absorber with r = 1 (specific resistance equal to the characteristic impedance in air)is slightly better than these, 2.5 octaves. The new absorbers with r > 1, are much better than these, and some satisfies high absorption in broad frequency range. Realization of these will mean great progress of MPP absorbers.     

喷气式Z箍缩等离子体辐射软X射线能谱的研究

研制了一台五通道ROSS-FILTER-PIN软X射线能谱仪，能谱范围为0.28—1.56keV.它由5个连续能段组成，每个能段的起止边由罗斯滤片对(ROSS-FILTERS)的L或K吸收边确定.罗斯滤片对的厚度通过优化计算得到，为了使每个通道的灵敏区外响应(即所测能段外响应)与通道总响应之比最小，在滤片对的第二滤片上镀上了一定厚度的第一滤片材料；为了缩减滤片表面积以增强低能滤片的抗冲击能力及方便滤片加工，能谱仪采用了小探测面积的PIN探测器(1mm²).借助此能谱仪，测量得到了喷气式Z箍缩(Z-pinch)等离子体辐射软X射线能谱的分布，并研究了软X射线产额随箍缩状况的变化趋势. 关键词： Z箍缩等离子体 罗斯滤片 软X射线能谱     

荧光X射线分析装置

本发明的课题在于提供一种进行氮置换的荧光X射线分析装置，容易更换试样室和照射室之间的隔壁膜，在分析时，试样室的空气不流入照射室。第1支架（21）按照其窗（21a）与试样室（3）和照射室（8）之间的壁部（4）的窗（如）重合的方式气密地安装于壁部（4）上，按照覆盖第1支架的窗（21a）的方式设置隔壁膜（9）。第2支架（23）按照其窗（23a）夹持隔壁膜（9），与第1支架的窗（21a）重合的方式设置。     

热处理条件对双粉工艺中Bi—2212粉末的相组成影响

实验研究了Bi-2212粉末在空气，8％O2和纯O2种处理的相组成特征，指出通过改变热处理温度和气氛可控制前驱粉中对2223成相影响较大的(Bi，Pb)-2212相，Ca2PbO4相，2201相和14：24AEC等相。     

Self-assembly behaviour of amphiphilic diblock copolymer in selective solvents studied by synchrotron small-angle x-ray scattering

The aggregation behaviour of styrene-vinyl benzoic acid (PSm-b-PVBAn) amphiphilic diblock copolymers in selective solvents with different m and n was investigated by synchrotron small-angle x-ray scattering (SAXS). We have carried out a detailed analysis of scattering intensity, dimension, shape and microstructure of the diblock copolymers of narrow distribution in water, methanol, ethanol and isopropanol selective solvents, respectively. We have found that the aggregation behaviour of the copolymer depends on the nature of the solvent and the micelle forms fiat disc objects with the ratio of radius ω=0.4. The average radius gyration Rg of the copolymer decreases as solvents change from isopropanol to ethanol and to methanol, and increases with increasing pH in aqueous solution, but decreases with the addition of COCl2 in ethanol solvent. The scattering intensity of diblock copolymer micelle follows I(h) ∝ h^-α in different selective solutions, suggesting that the PSm-b-PVBAn coils have self-similar structure behaviour or a fractal structure in the selective solvents. All of these revealed that the aggregation behaviour of the diblock copolymer changes dramatically with experimental condition in the selective solvent. The increase of mass fractal dimension (Dm) from 2.12 to 2.47 indicates that the copolymer chain changes from a swollen coil to a rather compact disc in the course of changing solvents, decreasing surface fractal dimension (Ds) from 2.98 to 2.58 indicates that the copolymer micelle change from a rather rough surface to a smooth form in the course of increasing pH in aqueous solutions, and increasing Dm and Ds from 2.29 to 2.35 and 2.70 to 2.90, respectively, indicates the shrinkage of copolymer micelle to a rather compact and rough disc form by adding COCl2 in ethanol solvents.