Bi-Sr-Ca-Cu-O超导体与氧化物衬底材料的反应性估计

测定了一系列氧化物的电子结合能，显示了铋系超导体与二元氧化物衬底材料的化学反应性可以用固态酸碱反应理论来描述，其反应性大小除了可以用衬底氧化物的酸碱参数估计以外，还可以用衬底氧化物氧离子的内层电子结合能估计．     

低温和低压下水热合成Na4Zr2(SiO4)3

以ZrOCl_2·8H_2O,Na_2SiO_3·9H_2O和NaOH为原料,在250℃约100bar的条件下,水热晶化合成出Na_4Zr_2(SiO_4)_3,并生长相应的单晶。讨论了水热反应及其条件.产物借助于XRD,Raman,~(29)Si MAS NMR以及阻抗谱技术进行了研究.结果表明产物具有与其他方法制备的Na_4Zr_2(SiO_4)_3相同的性质.     

富勒烯掺杂有机光电导材料的光电导性

富勒烯掺杂有机光电导材料的光电导性徐铸德，陈万喜，冷拥军，许小平，李文铸（浙江大学化学系，物理系，杭州，３１００２７）汪茫（浙江大学高分子科学与工程学系）关键词富勒烯，光化学，光物理，光电导体光电导材料在现代静电成像领域中有极广泛的应用，近年来，有机...     

富勒烯化聚环氧丙基咔唑的合成与表征

通过Ｆｒｉｅｄｅｌ－Ｃｒｒａｆｔｓ反应制备了富勒烯化的聚环氧丙基咔唑，聚合物中Ｃ６０的含量最高可达７．６ｗｔ％。通过凝胶渗透色谱法测定了聚合物分子量，并采用＾上Ｈ和＾１３Ｃ－ＮＭＲ，ＩＲ，热分析及光谱等手段对其结构进行了分析与表征。     

电场对含高氯酸锂盐的互穿网络高分子快离子导体的电导的影响

研究了直流电场对含ＬｉＣｌＯ４的聚氧化乙烯（ＰＥＯ）４００与环氧树脂形成的液晶态互穿网络高分子忆禽子导体的电导率的影响。在室温至９０℃范围内，电导率随外加电压增加面降低。外加电压越高，对电导率变化的影响越大。     

可溶性聚苯胺的合成及研究

本文报道了可溶性聚苯胺(PAn)的合成方法。通过对比可溶和不可溶PAn的导电性、电化学行为及IR光谱,说明它们的分子链基本结构相同。并测得了PAn在DMF-d_7中的~13C-NMR 谱。     

金属有机导体、半导体和超导体

本文综述了三类金属有机固体化合物的合成、结构与导电性能。这三类化合物是金属有机电荷转移盐,金属酞菁和会属卟啉络合物,以及金属有机夹层化合物。     

固体电解质La2-xCaxMo1.7W0.3O9-δ(0≤x≤0.2)的合成、表征及电性能

在氧离子导体La₂Mo_1.7W_0.3O₉的基础上，采用固相法合成了La位掺杂的Ca系列新型氧化物La_2-xCa_xMo_1.7W_0.3O_9-δ(0≤x≤0.2)。通过XRD、Raman和XPS等手段对化合物结构进行表征，交流阻抗谱测试其电性能。结果表明：掺杂离子Ca²⁺的半径小于基质离子La³⁺的半径导致晶格收缩；Ca的掺杂在La₂Mo_1.7W_0.3O₉自身内置氧空位的基础上增加了额外的氧空位，提高了氧离子导体的电导率，550 ℃电导率由0.79 × 10^-4 S·cm^-1 (x=0.0)增加到1.5 × 10^-4 S·cm^-1 (x=0.16，0.2)，电导率增加89.9%。     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

稀土元素在LD30铝合金真空钎焊中的作用

研究了添加La和Ce的Al-Si基钎料真空钎焊LD30铝合金接头的力学性能，微观组织形貌和EDS，并与未添加稀土元素的Al-Si基钎料真空钎焊接头进行对比。结果表明，添加稀土元素的LD30铝合金真空钎焊接头抗拉强度为288MPa，达母材抗拉强度的97．6％，明显高于未添加稀土的LD30合金真空钎焊接头。其机制在于La,Ce能够明显提高Al-Si基钎料与LD30铝合金的润湿性能，改善LD30铝合金真空钎焊接头焊缝及其基体中杂质元素的分布，促进钎料和母材中各元素的均匀扩散，从而提高真空钎焊接头的力学性能。