障碍期权的定价问题

障碍期权是与路径相关的期权 ,因而它的定价计算是非常复杂的 .本文利用反射原理对障碍期权的定价问题进行了简化 ,从而最终给出障碍期权的定价公式 .而文中多次运用 Girsanov定理构造等价鞅测度是解决问题的关键 ,它为反射原理的使用创造了基本条件 .     

高峰值功率多注速调管的初步研究

 高峰值功率速调管因其作为高功率微波源而受到各国的重视。采用单电子注方案的高峰值功率速调管存在许多难以克服的问题,如工作电压很高,输出效率偏低,系统体积偏大等。对高峰值功率多注速调管进行了初步的研究,重点研究了S波段50 MW多注速调管的电子光学系统和高频互作用系统。研究表明,在与单注速调管相同的功率电平下,多注速调管的工作电压明显降低,输出效率明显提高,同时,这种管型也存在结构复杂、电子注聚焦和消除非工作模式困难等技术问题。     

DNB引出束流功率及剖面分布测量

 利用束流截止板热量计原理,测量了诊断中性束(DNB)注入托卡马克的束流功率及束流剖面分布。基于热量截止板上正交分布的13只K型热电偶探针测量出DNB引出束流,在加速极电源49 kV,6 A,100 ms的脉冲放电时,采样铜靶上的最高温升为14 ℃,从而计算出注入束流功率达到160 kW并得到束剖面分布。同时通过对热量截止板冷却循环水温升测量值在时间上的积分数值计算,也获得了注入束流总功率,为130 kW。分析了两种测量结果存在差异的原因,实验结果表明惯性束截止板热量计方法是测量粒子束流功率及剖面分布的有效手段。     

高功率离子束在漂移管中的中性化传输

 介绍了“闪光二号”加速器产生的高功率离子束在漂移管中的传输实验。对比了采用中性化措施前后的传输情况，分析了中性化措施对离子束束斑半径、束流均匀性的影响。根据实测的二极管电压模拟得到了传输一定距离后的束流波形，与实测结果符合较好。采取适当的中性化措施后，高功率离子束可以有效传输80 cm以上，束流发散得到抑制，束流均匀性得到改善。     

规格化对高斯消元法计算速度的影响

从计算原理和计算速度两个方面详细地分析比较规格化对求解线性方程组的高斯消元法在消元和回代过程中的影响,其中包括计算公式的变化、计算元素的计算次数、规格化元素的计算次数、计算所有元素所需的元素总数、对复数矩阵和实数矩阵的计算速度的影响等内容的比较,并对IEEE-57、-118、-300节点系统进行编程比较计算。计算结果表明,高斯消元法中规格化的计算虽极为简单,且对回代环节的影响不大,但可以大大提高前代环节的计算速度,从而大大提高求解线性方程组的计算速度,尤其是对复数矩阵。该结论同样适用于电力系统等各个工程领域用高斯消元方法求解线性方程组。更多还原     

Self-Assembled Multistable Scattering Mode for Versatile Energy-Saving Smart Windows

Smart windows are crucial to dynamic control over light transmission to fulfill various demands in energy saving, privacy, and information display; however, most present technologies still perform a single function (often tint or haze adjustment) and require continuous electricity for operation. In this study, novel self-assembled ionic liquid crystals (ILCs) doped with negative cholesteric liquid crystals (CLCs) to offer electrically switchable and stable scattering-mode light modulators are presented. The novel smectic A phase based on the ILCs exhibits high solubility in the adopted nematics, enhancing the LC device's performance in several ways, including improved homogeneity, stable alignment quality, prolonged stability, and simplified fabrication. The LC device can potentially offer a dynamically rapid switching function between stable transparent (imperfect fingerprint textures) states and stable scattering (focal conic textures with small domains) states by using external stimuli and highly maintained multistable states for prolonged periods, even when the external stimuli are removed. The LC device also offers polarization-independent scattering and transparent-mode LC light modulators, low operating voltage, excellent contrast, and broad viewing angles. Its versatility and outstanding field-off stability make it ideal for various applications such as smart lighting, building climate control, energy-saving displays, and augmented reality (AR) glasses.     

Long-Life Lead-Carbon Batteries for Stationary Energy Storage Applications

Owing to the mature technology, natural abundance of raw materials, high recycling efficiency, cost-effectiveness, and high safety of lead-acid batteries (LABs) have received much more attention from large to medium energy storage systems for many years. Lead carbon batteries (LCBs) offer exceptional performance at the high-rate partial state of charge (HRPSoC) and higher charge acceptance than LAB, making them promising for hybrid electric vehicles and stationary energy storage applications. Despite that, adding carbon to the negative active electrode considerably enhances the electrochemical performance. However, carbon brings some adverse effects, such as the severe hydrogen evolution reaction (HER) in the NAM due to the low overpotential of carbon material, promoting severe water loss in LCBs. From a practical application point of view, the irreversible sulfation of the negative active material (NAM) and extreme shedding and softening of the positive active material (PAM) are the main obstacles for next-generation LCBs. Recently, a lead-carbon composite additive delayed the parasitic hydrogen evolution and eliminated the sulfation problem, ensuring a long life of LCBs for practical aspects. This comprehensive review outlines a brief developmental historical background of LAB, its shifting towards LCB, the failure mode of LAB, and possible potential solutions to tackle the failure problems. The detailed LCB′s development towards long life was discussed in light of the reported literature to guide the researcher to date progress. More emphasis was directed toward the new applications of LCBs for stationary energy storage applications. Finally, state-of-the-art progress and further research gaps were pointed out for future work in this exciting era.     

BEPCⅡ大功率波导真空阀门的研制

 大功率波导真空阀门是BEPCⅡ直线加速器微波系统的重点改进项目，作为微波大功率传输和真空密封双重功能的超高真空微波器件，机械结构比较复杂，制造工艺难度大。经过各方努力，已经研究完成16台大功率波导真空阀门，并在2004年全部安装在加速器上使用。目前进入到波导真空阀门的脉冲功率为30~50 MW，高功率运行工作状态良好。对阀门从设计原理、机械结构、微波测试及高功率运行等方面作了较详细的阐述。     

Resin‐Derived Ni3S2/Carbon Nanocomposite for Advanced Rechargeable Aqueous Zn‐Based Batteries

The exploration of high‐energy and stable cathode materials is highly desirable and challenging for the development of advanced Zn‐based batteries. In this work, a facile pyrolysis method is reported to synthetize Ni₃S₂/carbon nanocomposite as high‐performance cathode by employing ion exchange resin as a precursor. Attributing to the abundant active sites and enhanced conductivity from well binding between Ni₃S₂ and carbon, a markedly high capacity of 234.3 mA h g^?1 is obtained for this Ni₃S₂/carbon at a high current density of 6.9 A g^?1. Moreover, a Zn‐based battery is demonstrated by using the Ni₃S₂/carbon as a cathode and Zn plate as an anode, which delivers a maximum power density of 58.6 kW kg^?1, together with a peak energy density of 356 W h kg^?1 and 93.7% capacity retention after 5000 charging–discharging cycles. This simple synthetic strategy to achieve robust Ni‐based composite electrodes may open up new opportunities to design other transition metal–based electrodes for energy storage applications.     

Development of a wide range-operable,rich-lean low-NOx combustor for NH3 fuel gas-turbine power generation

Low-NOx NH₃-air combustion power generation technology was developed by using a 50-kWe class micro gas-turbine system at the National Institute of Advanced Industrial Science and Technology (AIST), Japan, for the first time. Based on the global demand for carbon-free power generation as well as recent advances involving gas-turbine technologies, such as heat-regenerative cycles, rapid fuel mixing using strong swirling flows, and two-stage combustion with equivalence ratio control, we developed a low-NOx NH₃-air non-premixed combustor for the gas-turbine system. Considering a previously performed numerical analysis, which proved that the NO reduction level depends on the equivalence ratio of the primary combustion zone in a NH₃-air swirl burner, an experimental study using a combustor test rig was carried out. Results showed that eliminating air flow through primary dilution holes moves the point of the lowest NO emissions to the lesser fuel flow rate. Based on findings derived by using a test rig, a rich-lean low NOx combustor was newly manufactured for actual gas-turbine operations. As a result, the NH₃ single fueled low-NOx combustion gas-turbine power generation using the rich-lean combustion concept succeeded over a wide range of power and rotational speeds, i.e., below 10–40 kWe and 75,000–80,000?rpm, respectively. The NO emissions were reduced to 337?ppm (16% O₂), which was about one-third of that of the base system. Simultaneously, unburnt NH₃ was reduced significantly, especially at the low electrical power output, which was indicative of the wider operating range with high combustion efficiency. In addition, N₂O emissions, which have a large Global Warming Potential (GWP) of 298, were reduced significantly, thus demonstrating the potential of NH₃ gas-turbine power generation with low environmental impacts.