Growth studies of m-GaN layers on LiAlO2 by MOCVD

This paper reports that the m-plane GaN layer is grown on （200）-plane LiAlO2 substrate by metal-organic chemical wpour deposition （MOCVD） method. Tetragonal-shaped crystallites appear at the smooth surface. Raman measurement illuminates the compressive stress in the layer which is released with increasing the layer＇s thickness. The high transmittance （80%）, sharp band edge and excitonic absorption peak show that the GaN layer has good optical quality. The donor acceptor pair emission peak located at -3.41 eV with full-width at half maximum of 120 meV and no yellow peaks in the photoluminescence spectra partially show that no Li incorporated into GaN layer from the LiAlO2 substrate.     

Linear and nonlinear optical susceptibilities of orthorhombic rare earth molybdates RE2(MoO4)3

The dielectric responses (i.e. the refractive indices and the second order nonlinear susceptibilities) of all orthorhombic rare earth molybdates have been studied on the basis of the relationship between dielectric responses and the average atomic number of constituent atoms of crystals. Both the linear and second order nonlinear optical responses at 1.064 μm decrease with increasing atomic number from La to Lu.     

Frequency dependence of ionic conductivity and dielectric relaxation studies in Na3H(SO4)2 single crystal

Electrical impedance measurements of Na₃H(SO₄)₂ were performed as a function of both temperature and frequency. The electrical conductivity and dielectric relaxation have been evaluated. The temperature dependence of electrical conductivity reveals that the sample crystals transformed to the fast ionic state in the high temperature phase. The dynamical disordering of hydrogen and sodium atoms and the orientation of SO₄ tetrahedra results in fast ionic conductivity. In addition to the proton conduction, the possibility of a Na⁺ contribution to the conductivity in the high temperature phase is proposed. The frequency dependence of AC conductivity is proportional to ω^s. The value of the exponent, s, lies between 0.85 and 0.46 in the room temperature phase, whereas it remains almost constant, 0.6, in the high-temperature phase. The dielectric dispersion is examined using the modulus formalism. An Arrhenius-type behavior is observed when the crystal undergoes the structural phase transition.     

反应磁控溅射制备TiO2和Nb2O5混合光学薄膜

利用反应磁控溅射技术在BK-7基片上制备了二氧化钛和五氧化二铌均匀混合的光学薄膜.薄膜的内部微结构、表面形貌、化学成分比例以及光学性质等用X射线衍射、高分辨扫描电子显微镜、原子力显微镜、X射线光电子能谱和紫外可见近红外分光光度计进行研究；发现制备的薄膜为非晶结构，薄膜的表面平整、内部结构致密，不存在柱状结构或结晶颗粒的缺陷，TiO2与Nb2O5的成分比例大致是1∶1.54.从光学透射光谱计算的折射率和消光系数显示，在550 nm波长处的折射率为2.34，消光系数为2.0×10－4.结果表明制备的薄膜是TiO2和Nb2O5均匀混合的高质量光学薄膜.     

贝塞尔-高斯脉冲光束在色散介质中的时间和光谱特性

 对等衍射长度贝塞尔-高斯脉冲光束在色散介质中的时间和光谱特性作了研究，结果表明，通过选择适当的空间参数，贝塞尔-高斯脉冲光束沿轴上传输时，脉冲宽度不变。传输距离小于无衍射长度时，随衍射角增加，功率谱形状未变，脉冲波形保持不变；传输距离大于无衍射长度时，随衍射角增加，光谱由蓝移变为红移，脉冲展宽。     

掺钕聚甲基丙烯酸甲酯的光学特性

研究了制备的掺钕螯合物Nd(DBM)3Phen材料的吸收光谱、激发光谱、荧光光谱,应用Judd-Ofelt理论计算了该材料的强度参量．分析了钕离子激发态4F3／2的辐射寿命(631 μs)和4F3／2→4IJ′跃迁的受激发射截面和荧光分支比．     

两种方法制备ITO薄膜的红外特性分析

比较了用电束加热蒸发法和直流磁控溅射法制备的氧化锡铟(ITO)薄膜在红外波段的光学特性实验发现,通过直流磁控溅射在常温下制备的ITO薄膜在红外波段折射率稳定、消光系数小,比电子束加热蒸发制备的膜有较高的透过率在波长1550nm附近的透过率可达86%以上,消光系数约为004,方电阻最低为100Ω/□.     

纳米颗粒团聚物流化特性的数值研究

基于气固两相流体动力学理论,建立气体纳米颗粒团聚物两相流动双流体模型.模型中采用了Jung ＆ Gidaspow (2002)测量的固相应力模量和王垚等(2001)提出的聚团曳力系数计算模型.对纳米颗粒团聚物的流化过程进行了数值模拟,得到纳米颗粒团聚物的流化特性.模拟得出的床层膨胀比与文献中实验的结果较为接近.     

Correlation between the Mechanical Properties and the Amount of Desorbed Water for Composites Based on Low-Density Polyethylene and Linen Yarn Production Waste

The effect of the amount of desorbed water on the mechanical properties of composites based on low-density polyethylene and linen yarn production waste (LW) is analyzed by statistical methods. It is shown that the amount of absorbed water decreases during the desorption process at room temperature both for specimens modified and unmodified with diphenylmethane diisocyanate (DIC.) The most sensitive to the action of water is the elastic modulus, which decreases considerably under the effect of water and is fully restored in the desorption process. The tensile strain also increases with the amount of absorbed water. It is found that the elastic modulus of the unmodified composite correlates linearly with the amount of desorbed water. Between the amount of desorbed water and the tensile strain, as well the specific work of deformation, a negative linear correlation is revealed. After water desorption, all strength and deformation characteristics of both the modified and unmodified composites are fully recovered.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 4, pp. 515–524, July–August, 2005.     

A quark model based on QCD scale anomaly

We consider a quark model based on QCD scale anomaly in which the quarks move in the field of an effective glueball field. Hadrons correspond to solitonic bags of higher energy density in a nonperturbative sea of condensed gluons. We calculate the static properties of nucleon in this model and find that the nucleon mass is far too large (2.4–4 GeV) and the proton charge radius (0.37–0.54 fm) is low. The proton gyromagnetic ratio and g_A/g_v are in reasonable agreement with the experimental numbers.