利用计算机辅助装调检测矩形大口径离轴非球面的方法研究

通过非球面的零位补偿法,完成了对矩形大口径离轴非球面镜的检测。先用光学设计软件Zemax从理论上分析了在检测中会出现的现象,并结合计算机辅助装调技术,确定在检测过程中相对敏感的自由度,然后控制这些量,使补偿器和非球面的相对关系与理论设计相吻合,在Zygo相位干涉仪上测得最终结果。在λ=632.8nm时,中心圆口径与两个边缘圆口径面形误差RMS分别为0.022λ,0.037λ,0.032λ。检测结果,达到预期目的。     

动态规划在教学管理中的应用

本将动态规划理论应用于高校教学管理当中，得出了教学管理中重要的环一排课的最优策略。     

Analysis of a Duopoly Supply Chain and its Application in Electricity Spot Markets

This paper studies a supply chain consisting of two suppliers and one retailer in a spot market, where the retailer uses the newsvendor solution as its purchase policy, and suppliers compete for the retailer’s purchase. Since each supplier’s bidding strategy affects the other’s profit, a game theory approach is used to identify optimal bidding strategies. We prove the existence and uniqueness of a Nash solution. It is also shown that the competition between the supplier leads to a lower market clearing price, and as a result, the retailer benefits from it. Finally, we demonstrate the applicability of the obtained results by deriving optimal bidding strategies for power generator plants in the deregulated California energy market. Supported in part by RGC (Hong Kong) Competitive Earmarked Research Grants (CUHK4167/04E and CUHK4239/03E), a Distinguished Young Investigator Grant from the National Natural Sciences Foundation of China, and a grant from Hundred Talents Program of the Chinese Academy of Sciences.     

Qualitative Theory and Identification of Dynamic System with One Degree of Freedom

Dynamic systems described by nonlinear differential equations of the second order are studied. It is assumed that certain preliminary information on the dissipative or elastic characteristics of systems is known. A new approach is demonstrated to obtaining full information on unknown or partially known characteristics of a system from measurements of not only displacements but also velocities and accelerations __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 6, pp. 139–143, June 2005.     

Existence results for second order boundary value problem of impulsive dynamic equations on time scales

In this paper, Schaefer's fixed point theorem and nonlinear alternative of Leray-Schauder type are used to investigate the existence of solutions for second order boundary value problem for impulsive dynamic equations on time scales.     

On the tribological characteristics of dynamically loaded journal bearing with micropolar fluids

The addition of the additives to the lubricant oil to enhance the characteristics of the lubricant will influence the performance of the bearings. Based on the theory of micropolar fluids, the tribological characteristics of a dynamically-loaded journal bearing are numerically studied. Comparisons are made between the Newtonian fluids and the micropolar fluids. It is shown that for a dynamically-loaded journal bearing, the micropolar fluids yield an increase not only in the friction force, but also in the friction coefficient. In addition, the oil film pressure and the oil film thickness are obviously higher than that of Newtonian fluids.     

Hg1-xCdxTe/Cd1-zZnzTe的X射线反射率及半峰全宽的动力学研究

X射线衍射摇摆曲线的计算机模拟是一种获得材料晶体质量参量的有效方法，其中材料本征摇摆曲线的计算是计算机模拟的基础。用X射线动力学理论计算了Hg1-xCdxTe和Cd1-zZnzTe本征反射率曲线，并研究了组分、膜厚分别对本征反射率和半峰全宽的影响。结果表明Hg1-xCdxTe和Cd1-zZnzTe的本征反射率和半峰全宽与材料组分和厚度有明显的依赖关系，且该依赖关系取决于X射线在材料中的散射和吸收的相对强弱。薄膜的厚度也是直接影响本征摇摆曲线峰形、半峰全宽和反射率的重要因素，当薄膜厚度小于穿透深度时，表征本征反射率曲线的各个参量均与薄膜厚度有直接的关系。对于(333)衍射面，碲镉汞材料厚度大于7μm后，本征反射率和半峰全宽将不再发生明显变化。     

Determination of the rheological behavior of epoxy–amine thermosets by dynamic mechanical analysis: Isothermal methods versus nonisothermal methods

The reticulation process of an epoxy resin using an amine as a cure agent was studied at different temperatures and concentrations of the cure agent with dynamic mechanical thermal analysis. The study was performed under both isothermal and nonisothermal conditions, and a temperature–time–transformation diagram was obtained. The measurements from the two modes gave similar results, although the nonisothermal mode required fewer experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1965–1977, 2003     

Use of dynamic trees in a network simplex algorithm for the maximum flow problem

Goldfarb and Hao (1990) have proposed a pivot rule for the primal network simplex algorithm that will solve a maximum flow problem on ann-vertex,m-arc network in at mostnm pivots and O(n ² m) time. In this paper we describe how to extend the dynamic tree data structure of Sleator and Tarjan (1983, 1985) to reduce the running time of this algorithm to O(nm logn). This bound is less than a logarithmic factor larger than those of the fastest known algorithms for the problem. Our extension of dynamic trees is interesting in its own right and may well have additional applications.Research partially supported by a Presidential Young Investigator Award from the National Science Foundation, Grant No. CCR-8858097, an IBM Faculty Development Award, and AT&T Bell Laboratories.Research partially supported by the Office of Naval Research, Contract No. N00014-87-K-0467.Research partially supported by the National Science Foundation, Grant No. DCR-8605961, and the Office of Naval Research, Contract No. N00014-87-K-0467.     

Convergence analysis of time-point relaxation iterates for linear systems of differential equations

We study convergence properties of time-point relaxation (TR) Runge-Kutta methods for linear systems of ordinary differential equations. TR methods are implemented by decoupling systems in Gauss-Jacobi, Gauss-Seidel and successive overrelaxation modes (continuous-time iterations) and then solving the resulting subsystems by means of continuous extensions of Runge-Kutta (CRK) methods (discretized iterations). By iterating to convergence, these methods tend to the same limit called diagonally split Runge-Kutta (DSRK) method. We prove that TR methods are equivalent to decouple in the same modes the linear algebraic system obtained by applying DSRK limit method. This issue allows us to study the convergence of TR methods by using standard principles of convergence of iterative methods for linear algebraic systems. For a particular problem regions of convergence are plotted.