不饱和链烃沸点的拓扑研究

基于邻接矩阵与边价 (fi)定义边价连接性指数 ( mF) ,其中的0 F ,1 F与 2 94种不饱和链烃 (包括烯烃、炔烃及烯炔烃 )的沸点 (Tb)关联 ,得到良好的数学模型 :ln( 70 0 -Tb) =6 5 2 3 3 1-0 0 0 4880 F2 -0 3 46771 F0 5(n =2 94,R =0 9979,R2 =0 995 8,F =3 490 4,S =5 12 ) ,该回归模型经Jackknife法检验具有总体稳健性 .可以预示 ,该指数将在定量构效关系研究中成为重要参数 .     

活化温度对单组分水性聚氨酯膜结构和性能的影响

用FTIR,DSC,SEM等方法研究了不同热活化温度对水性聚氨酯(APU)结构和性能的影响.结果表明,较高温度的热处理有利于APU膜分子中的氢键重新排列,导致APU膜中无序化氢键有较大幅度地增加和有序化氢键小幅增加,从而形成大量非完善的远程有序结构和少量完善的远程有序结构.这种有序结构在APU中成为有效的物理交联点,使APU膜表现出较好的力学性能.     

桥链七甲川菁的合成及光性能

菁是一种具有多功能用途的染料,除用作卤化银感光材料及有机光导材料的光谱增感剂、光记录材料中记录介质外,还可作为染料激光器中用的激光染料.我们曾合成了四甲川苯乙烯菁、五甲川(艹粦)及五甲川吡喃鎓等红外染料作为激光染料,测定了它们的光性能.本文合成了具有桥链的七甲川菁,研究了这些桥链七甲川菁的吸收光谱及荧光光谱,并以YAG激光倍频(532nm)作泵浦源,测定了它们的激光调谐范围、中心波长及激光转换效率.     

Novel RPLC stationary phases for lipophilicity measurement: solvatochromic analysis of retention mechanisms for neutral and basic compounds

An RPLC was developed to rapidly determine lipophilicity of neutral and basic compounds using three base deactivated RPLC stationary phases particularly designed for the analysis of basic compounds, namely, Supelcosil ABZ(+)Plus, Discovery RP Amide C16, and Zorbax Extend C18. The work consisted of three sets of experiments. In the first log kw values of neutral compounds were extrapolated using hydroorganic mobile phases at different compositions. Good correlation between log kw and log Poct indicated that the method was appropriate for these supports, without adding a silanol masking agent. In the second set of experiments, isocratic log k values of neutral and basic compounds were measured with three different mobile phases. The best estimation of lipophilicity was obtained for neutral and basic compounds when the secondary interactions were strongly reduced (i. e., when basic compounds were under their neutral form). In the third set of experiments, isocratic retention factors of basic compounds (in their neutral form) were measured with a high-pH mobile phase, on a chemically stable support (Zorbax Extend C18). Under these chromatographic conditions, correlation between the isocratic retention factors and log Poct (log D10.5) for basic compounds was similar to that for neutral compounds.     

明胶膜的性能研究进展

明胶膜具有良好的生物相容性和可降解性,并且其物化性质能被调节,因而应用比较广泛.本文综述了不同添加剂和制备条件对明胶膜的机械性能、阻隔性能、生物可降解性等的影响.通常增塑剂可以改善明胶膜的脆性,减小其机械强度和热稳定性.交联能有效提高明胶膜的机械性能和热稳定性,减缓明胶的降解速率.交联包括化学交联、生物相容性交联和物理交联.明胶与蛋白质、糖类、脂类复合,其性能得以改进,并且将明胶与高聚物共混、共聚改性,可以改善明胶膜的性能以满足不同领域的应用.     

聚酯-聚酯多嵌段共聚物的合成及其动态力学性能

聚酯-聚醚多嵌段共聚物的动态力学性能谱上有两个T_8,不宜做阻尼材料。本文报道聚对苯二甲酸乙二醇酯(PET)-端羟基聚己二酸乙二醇酯(PEA)共聚物(简称嵌段共聚酯),比聚醚-聚酯多嵌段共聚物有更好的相容性。我们研究了PEA的分子量,间苯二甲酸的用量对嵌段共聚酯的结晶度,以及结晶度对嵌段共聚酯的动态力学性能的影响。     

共混合聚(醚-酯)多嵌段共聚物的表面表征及其血液相容性研究

本文通过X-射线光电子能谱(XPS)、表面接触角、表面ξ电位和血液相容性实验,研究了聚(醚-酯)多嵌段共聚物及其共混物的表面组成和性质与血液相容性的关系。实验结果表明,疏水性的PET-PTMO多嵌段共聚物的血液相容性很差,并且与表相中软段的富集量无关;当亲水性的PET-PEO多嵌段共聚物与疏水性的PET-PTMO多嵌段共聚物共混后,发现存在着一个最佳的共混比例,此时材料表面的血小板粘附量大大降低。对于共混物,表相△[C—O)/[C—O]和表面ξ电位可以较好地与血小板粘附量相关联。以上结果清楚地表明,材料表面的亲-疏水性平衡、软段深度层次分布及表面电位是影响血液相容性的重要因素。     

聚苯乙烯—钛酸钡复合材料介电性能的研究

以聚苯乙烯与化学沉淀法钛酸钡陶瓷为基本组成，采用溶液共混，溶液聚合，表面处理后溶液聚合三种方法进行复合，发现后两种复合的钛酸钡颗粒表面发生界面变化，形成活性界面，使得溶液聚合法和表面处理后溶液聚合所得到的材料具有较低的介电损耗，在高频下能保持较高的介电系数。     

离子交换-双氧水氧化法制备纳米CeO2晶体

以99.995% Ce(NO₃)₃和强碱性阴离子交换树脂为原料，采用离子交换-双氧水氧化法合成制备出纳米CeO₂晶体。并就离子交换反应中的Ce³⁺浓度、树脂加入速度和离子交换温度及H₂O₂加入速度等条件对CeO₂粒径的影响进行了探讨，得出了离子交换-双氧水氧化法制备纳米CeO₂晶体的最佳工艺条件。FTIR、TEM分析表明，离子交换法无需对合成的Ce(OH)₃溶胶进行洗涤即可去除NO₃^-、CO₃^2-等阴离子杂质，并用H₂O₂将该溶胶氧化，经真空干燥可制得粒径分布均匀，平均晶粒尺寸约3 nm，高纯度的CeO₂粉体。     

Deposition of plasma conjugated polynitrile thin films and their optical properties

The plasma polymerization of 4-phenylbenzonitrile was carried out with the objective of synthesizing a novel conjugated polynitrile thin film with a better optical property. The structure, compositions and morphology of the plasma-polymerized 4-phenylbenzonitrile (PPBPCN) thin films were investigated by Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). A fine, homogenous PPBPCN film with a large π-conjugated system and a high retention of the aromatic ring structure of the starting monomer in the deposited plasma films is obtained when a low discharge power of 30 W was used during film formation. For the first time, a blue emission with relatively high photoluminescence intensity for PPBPCN thin films was observed.