Modification of the halogen end groups of polystyrene prepared by ATRP

The stabilization modification of the halogen end groups of polystyrene prepared by atom transfer radical polymerization (ATRP) has been attempted. The reaction mechanism adopted is radical chain transfer reaction, and iso-propylbenzene is employed as not only the chain transfer agent but also the solvent. Moreover, Cu⁰ is used as the acceptor of the transformed halogen atom in some experiments. As evidenced by ¹H NMR analysis of the modified products, the halogen end group can really be converted into the much more stable carbon-hydrogen structure. When Cu⁰ is not used, the conversion of the halogen end groups rises rapidly during the early stage and the increase rate slows down after about 8 h reaction. In view of the influence of reaction temperature on the modification, the conversion increases almost exponentially with temperature in the range of 80-100 °C, and the increase rate slows down at higher temperature. ¹H NMR and SEC analyses prove that the modification reaction does not destroy the polymer backbone and the molecular weights remain almost the same as those of the unmodified samples. When Cu⁰ is introduced, the modification reaction proceeds much rapidly, the conversion of the halogen end groups rises almost linearly at the early stage and the nearly complete (>95%) dehalogenation of the polymeric chains is observed after only 12 h reaction. However, the molecular weights rise and the polydispersities become wider after the modification, which implies that the modification is accompanied with the couple termination of the polystyrene radicals besides chain transfer reaction. Furthermore, the couple termination can be restrained at some lower catalyst concentration. Indeed, the modified polymers show improved thermal stability, the initial weight loss temperatures is increased from 196 °C to 378 °C for the linear polystyrene and from 203 °C to 261 °C for the hyperbranched polystyrene.     

PS-b-P4VP两嵌段共聚物的合成及其自组装的研究

双硫酯 (PhC(S)SCH2 Ph)作为链转移剂 ,AIBN作为引发剂 ,用可逆的加成 断裂链转移 (RAFT)活性自由基聚合方法 ,合成了PS大分子链转移剂 .然后在AIBN引发下 ,利用制得的大分子链转移剂 ,以DMF为溶剂 ,80℃下采用RAFT方法 ,合成了PS b P4VP两嵌段共聚物 ,通过核磁共振谱及动力学的研究证明了其活性聚合的特征 .结果表明聚合反应在 2 4h内转化率可达 95 % .并用透射电子显微镜 (TEM )和扫描电子显微镜(SEM)研究了PS b P4VP两嵌段共聚物在选择性溶剂硝基苯 四氢呋喃中的自组装行为 ,研究结果表明改变聚合物的浓度以及选择性溶剂 ,可观察到自组装行为的变化 .     

有机硅侧链液晶研究进展

综述了国内外有机硅侧链液晶近年来的研究进展，对近晶型、席夫碱型、向列型、胆甾型、偶氮苯型、鱼骨型以及光学非线性型几种主要类型的有机硅侧链液晶进行了详细介绍，并对近年来受到重视的有机硅侧链液晶电流性和离聚物研究进展作了较全面的总结，最后对其应用前景进行了展望。     

氢气对氯硅烷功能化非共轭α,ω-双烯烃和丙烯共聚物链结构的影响

基于Ziegler-Natta催化剂的氯硅烷功能化非共轭α,ω-双烯烃与丙烯共聚,在水的引发下脱水缩合可有效地形成长支链结构的聚丙烯树脂.而氢气常作为丙烯聚合中的链转移剂,调控聚丙烯的分子量,基于此,研究了氢气对氯硅烷功能化非共轭α,ω-双烯烃与丙烯共聚物链结构的影响.核磁共振氢谱(~1H-NMR)测试结果表明,氢气抑制了氯硅烷功能化非共轭α,ω-双烯烃的插入,随着氢气用量的增加,共聚物分子链中端基乙烯基含量由0.12 mol%降低到0.05 mol%.熔体流变行为测试结果显示,聚合物熔体的储能模量、损耗模量和零剪切黏度均随着氢气用量增加而降低,这主要是由于相对分子质量减小和长支链密度的减少.     

含聚醚间隔链的扩链脲改性环氧树脂/双氰双胺固化体系性能研究

合成了一系列含不同分子量聚环氧丙烷 (PPG)柔性间隔链的扩链脲 ,系统考察了扩链脲改性环氧树脂E 5 1/双氰双胺 (dicy)固化体系的固化反应活性、动态力学行为、冲击性能和断裂面形态结构 ,并对体系的冲击性能、形态结构与动态力学行为之间的关系进行了探讨 .结果表明 ,改性体系固化反应活性明显提高 ,固化反应表观活化能降低 ,固化反应峰顶温度从 190℃降低至 14 0℃ ,固化反应的表观活化能由 14 5 5kJ/mol降至 70～ 80kJ mol;改性体系冲击强度明显提高 ,其中所含PPG柔性链分子量为 10 0 0的扩链脲改性的E 5 1/dicy体系冲击强度较未改性的E 5 1/dicy体系提高了 8倍 ,其冲击试样断裂面的形态具有明显的韧性断裂特征 ,微观两相网络结构的存在导致了改性体系冲击强度显著提高     

Enzymatic synthesis of medium chain monoglycerides in a solvent-free system

The synthesis of monocaprin, monolaurin, and monomyristin in a solvent-free system was conducted by mixing a commercial immobilized lipase with the organic reactants (glycerol and fatty acids) in a 20-mL batch reactor with constant stirring. The effects of temperature, fatty acid/glycerol molar ratio, and enzyme concentration on the reaction conversion were determined. The addition of molecular sieves in the assays of monomyristin synthesis was also evaluated. The reactions were carried out for 5 to 6 h and the nonpolar phase was analyzed by gas chromatography. The best results in terms of selectivity and conversion (defined as the percentage of fatty acid consumed) were achieved when the stoichiometric amount of reagents (molar ratio=1) and 9% (w/w) commercial enzyme were used and the reaction was performed at 60°C. The addition of molecular sieves did not improve the synthesis of monomyristin. Conversions as high as 80%, with monoglycerides being the major products, were attained. After 5 h of reaction, the concentration of monoglyceride was about twice that of diglyceride, and only trace amounts of triglyceride were found. The results illustrate the technical possibility of producing medium chain monoglycerides in a solvent-free medium using a simple batch reactor.     

The effects of polymer chain rigidification, zeolite pore size and pore blockage on polyethersulfone (PES)-zeolite A mixed matrix membranes

The polyethersulfone (PES)-zeolite 3A, 4A and 5A mixed matrix membranes (MMMs) were fabricated with a modified solution-casting procedure at high temperatures close to the glass transition temperatures (T_g) of polymer materials. The effects of membrane preparation methodology, zeolite loading and pore size of zeolite on the gas separation performance of these mixed matrix membranes were studied. SEM results show the interface between polymer and zeolite in MMMs experiencing natural cooling is better (i.e., less defective) than that in MMMs experiencing immediate quenching. The increment of glass transition temperature (T_g) of MMMs with zeolite loading confirms the polymer chain rigidification induced by zeolite. The experimental results indicate that a higher zeolite loading results in a decrease in gas permeability and an increase in gas pair selectivity. The unmodified Maxwell model fails to correctly predict the permeability decrease induced by polymer chain rigidification near the zeolite surface and the partial pore blockage of zeolites by the polymer chains. A new modified Maxwell model is therefore proposed. It takes the combined effects of chain rigidification and partial pore blockage of zeolites into calculation. The new model shows much consistent permeability and selectivity predication with experimental data. Surprisingly, an increase in zeolite pore size from 3 to 5 Å generally not only increase gas permeability, but also gas pair selectivity. The O₂/N₂ selectivity of PES-zeolite 3A and PES-zeolite 4A membranes is very similar, while the O₂/N₂ selectivity of PES-zeolite 5A membranes is much higher. This implies the blockage may narrow a part of zeolite 5A pores to approximately 4 Å, which can discriminate the gas pair of O₂ and N₂, and narrow a part of zeolites 3A and 4A pores to smaller sizes. It is concluded that the partial pore blockage of zeolites by the polymer chains has equivalent or more influence on the separation properties of mixed matrix membranes compared with that of the polymer chain rigidification.     

有限型的首次返回例外集的测度和维数北大核心CSCD

设M=(m_(ij))是一个b×b阶矩阵且m_(ij)∈{0,1},∑_(M)是矩阵M=(m_(ij))诱导产生的有限型,σ是其上左推移算子.本文主要研究的是有限型动力系统(∑_(M),σ)上的首次返回速度问题.令τ_(k)(x)是点x∈∑_(M)首次返回到包含x的k阶柱集时间,且E_(α,β)={x∈∑_(M):lim inf_(k→∞)(logτ_(k)(x))/k=α,lim sup_(k→∞)(logτ_(k)(x))/k=β}.我们证明了:当M是不可约矩阵时,对任意0≤α≤β≤+∞,集合E_(α,β)的Markov测度要么等于0要么等于1并且具有满的Hausdorff维数.     

可再生能源配额制与碳排放权交易并行实施的政策效果

中国将同时实施可再生能源配额制与碳排放权交易,并以售电商为配额制的考核主体。本文建立两级供应链模型分析两者相互作用的政策效果。研究结果表明,引入碳排放权交易将导致火电价格上涨与可再生能源电力价格下降,有利于实现两者在同一价格水平竞争。然而,碳排放权交易亦将造成零售电价上涨,电力需求减少,且变化幅度与碳排放权价格和减排成本成正比。若配额比例与售电商差异性提高,在不影响环境成本内化于火电批发价格的同时,可降低售电商的转嫁成本。从而减小了可再生能源电力价格降幅与零售电价涨幅,并平抑碳排放权价格与减排成本上涨造成的电价与需求波动。     

农业供应链金融能有效缓解企业的融资约束？——涉农企业参与精准扶贫的实证研究

农业供应链金融为涉农企业融资难问题提供了新思路。本文以上市涉农上市企业2016~2018年的财务数据为样本,探讨了农业供应链金融对缓解企业融资约束的影响,以及涉农企业参与精准扶贫对缓解融资约束的调节作用。研究发现:涉农企业普遍面临融资约束问题,而农业供应链金融显著缓解了涉农企业的融资约束,且对参与精准扶贫企业的融资约束缓解更为显著。本文揭示了:农业供应链金融能有效缓解涉农企业的融资约束问题,再次证明了农业供应链金融缓解涉农企业融资约束的重要性和必要性,拓展了供应链金融研究的领域,同时对企业参与精准扶贫,响应新时期涉农企业社会责任的具体要求,形成政府、企业等共同承担社会责任的多元化减贫治理机制,助力乡村振兴提供相应借鉴。