固体颗粒与通道壁面相互作用的实验研究

本文通过实验研究了在一个水平直通道和三个倾斜通道内固体颗粒沿着主气流的方向运动,与通道壁面发生碰撞及和主气流掺混的特性。实验采用了PIV测试技术,获得了在流道中固体颗粒及气流的大量的瞬态及对应的时均流场数据。测量采用流场可视化技术,再现了流场的动态细节。在对实验数据分析的基础上,总结了有关颗粒扩散及与固壁碰撞的一些规律,定量阐述了固体颗粒与壁面碰撞的规律,提出了恢复系数为粒子入射速度与角度函数的模型。     

黏性不可压流体的自适应网格技术和基本特性方程分离算法的联合分析

组合基本特性方程分离算法和自适应网格技术,分析二维黏性不可压流体.该方法使用3节点三角单元,对速度分量和压力等变量分析,使用等阶次的插值函数.组合解法的主要优点在于,在自适应网格技术中,对解梯度变化大的区域,通过耦合误差估计生成小的单元,利于提高解的精度,在其它区域生成大单元,可以节省时间.最后,通过对一个黏性流体圆柱体绕流问题的瞬态和稳态特性分析,给出了组合解法性能的评价.     

遗传算法求解带容量限制的最小费用流问题

研究了带容量限制的带固定费用和可变费用的最小费用流问题,发现该问题是混合0-1整数规划问题,不存在多项式算法.在研究了最优解的结构后,结合最优解的结构特点为之设计了遗传算法,然后构造了一个100个节点的特殊网络,用计算机做了100例计算,验证了该算法具有很好的近似比和很快的收敛速度.     

稳态条件下气溶胶粒子在口腔模型中的沉淀率

以实际人体解剖学数据为基础,利用流体力学软件构建了口腔模型。由于口腔形状不规则,流场中会有湍流产生,所以本文选用的是k-ω方程。在此基础上,假设吸入空气流量为一个常量,改变吸入气体、气溶胶粒子的物理参数,以调整St数的变化,模拟不同情况下气溶胶粒子运动情况。由模拟结果可知:气溶胶粒子在口腔中的沉淀率受粒子半径、密度、及流速的影响,并随这些量的增加而增加;沉淀率可以视作St数的函数,并随St数的增加而增加;气溶胶粒子在口腔中的沉淀分布受模型几何形状和湍流的影响,在喉部附近沉淀较为明显;粒子在口腔中将沿怎样的轨迹运动则取决于粒子在入口处的初始位置。     

Spurious,zeroth-order entropy generation along a kinked wall

Numerical entropy generation is studied in the case of steady, subsonic Euler flow along a kinked solid wall. For a standard upwind finite volume discretization the numerical entropy error, a component of the global discretization error, appears to be zeroth-order in mesh size. Two possible causes of the zeroth-order entropy error are studied. First an investigation is made of the local truncation error on a kinked grid. Although this error also appears to be zeroth-order in the neighbourhood of the kink, it probably does not cause the zeroth-order entropy error. Next a study is made of the existence of a singularity in the exact solution. Probably, the Euler flow solution is singular at the kink in the wall. The form of this likely singularity is unknown. Therefore the construction of a computational method which uses a priori knowledge about the singularity is not possible. Finally it is shown by numerical experiments that the subsonic Euler flow along a kinked wall still can be computed with vanishing entropy errors by using an appropriate sequence of continuously curved walls which converge to the kinked wall in the limit of zero mesh width.     

机械加工多孔层在大气压和高于大气压时的沸腾换热

1引言在过去的二十年中，已研制出诸如HighFI。、Thermoexcel－E、Ge、－T、CIT等多种高性能强化沸腾换热结构［‘－’］，其中ThermoexcelE型结构是机械加工多孔层中有代表性的一种，并进行了较多研究＊‘］。但迄今为止，研究工作多限于一个大气压时的沸腾工况［‘，’］，而较少涉及非大气压时的情形。本文对一种ThermoexcelE型机械加工多孔层在大气压和高于大气压时的沸腾传热进行了实验，提出了简化物理模型，进行了流动与传热分析，综合实验数据，建立了相应的传热关联式。2实验研究实验装置参见文献＊。多孔层基体为厚壁紫铜管…     

The Method of Fundamental Solutions for Stokes flows with a free surface

We investigate the use of the Method of Fundamental Solutions (MFS) for solving Stokes flow problems with a free surface. We apply the method to the creeping planar Newtonian extrudate-swell problem and study the effect of the surface tension on the free surface. The results are in good agreement with existing finite element and boundary element solutions. © 1998 John Wiley & Sons, Inc. Numer Methods Partial Differential Eq 14: 667–678, 1998     

How well do discrete element granular flow models capture the essentials of mixing processes?

Flowing granular materials, undergoing both mixing and segregation, play important roles in industries ranging from minerals and food to pharmaceuticals and ceramics. Sometimes it is desirable to enhance the mixing and inhibit segregation and in other cases it is desirable to minimise the mixing and enhance the segregation. The fundamentals of these processes are poorly understood. Computational modelling of such granular flows offers a good opportunity to study these fundamentals. But how well do these discrete element based modelling techniques capture the essential features of mixing processes? The capabilities of our discrete element modelling package are described. Two different methods for measuring the rates of mixing are presented and three different configurations are studied. Qualitatively reasonable flows are obtained. A detailed study of the mixing demonstrates that the amount and nature of the mixing is quite sensitive to a range of physical parameters.     

A new positive‐definite regularization of incompressible Navier–Stokes equations discretized with Q1/P0 finite element

A new regularization method is proposed for the Galerkin approximation of the incompressible Navier–Stokes equations with Q1/P0 element, by newly introducing a square‐type linear form into the variational divergence‐free constraint regularized with the global pressure jump (GPJ) method. The addition of the square‐type linear form is intended to eliminate the hydrostatic pressure mode appearing in confined flows, and to make the discretized matrix positive definite and then non‐singular without the pressure pegging trick. Effects of the free parameters for the regularization on the solutions are numerically examined with a 2‐D driven cavity flow problem. Furthermore, the convergences in the conjugate gradient iteration for the solution of the pressure Poisson equation are compared among the mixed method, the GPJ method and the present method for both leaky and non‐leaky 3‐D driven cavity flows. Finally, the non‐leaky 3‐D cavity flows at different Re numbers are solved to compare with the literature data and to demonstrate the accuracy of the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

A non‐linear k–ε model with realizability for prediction of flows around bluff bodies

The incompressible flow around bluff bodies (a square cylinder and a cube) is investigated numerically using turbulence models. A non‐linear k–ε model, which can take into account the anisotropy of turbulence with less CPU time and computer memory then RSM or LES, is adopted as a turbulence model. In tuning of the model coefficients of the non‐linear terms are adjusted through the examination of previous experimental studies in simple shear flows. For the tuning of the coefficient in the eddy viscosity (=C_μ), the realizability constraints are derived in three types of basic 2D flow patterns, namely, a simple shear flow, flow around a saddle and a focal point. C_μ is then determined as a function of the strain and rotation parameters to satisfy the realizability. The turbulence model is first applied to a 2D flow around a square cylinder and the model performance for unsteady flows is examined focussing on the period and the amplitude of the flow oscillation induced by Karman vortex shedding. The applicability of the model to 3D flows is examined through the computation of the flow around a surface‐mounted cubic obstacle. The numerical results show that the present model performs satisfactorily to reproduce complex turbulent flows around bluff bodies. Copyright © 2003 John Wiley & Sons, Ltd.