Coupled lubrication and Stokes flow finite elements

A method is developed for performing a local reduction of the governing physics for fluid problems with domains that contain a combination of narrow and non‐narrow regions, and the computational accuracy and performance of the method are measured. In the narrow regions of the domain, where the fluid is assumed to have no inertia and the domain height and curvature are assumed small, lubrication, or Reynolds, theory is used locally to reduce the two‐dimensional Navier–Stokes equations to the one‐dimensional Reynolds equation while retaining a high degree of accuracy in the overall solution. The Reynolds equation is coupled to the governing momentum and mass equations of the non‐narrow region with boundary conditions on the mass and momentum flux. The localized reduction technique, termed ‘stitching,’ is demonstrated on Stokes flow for various geometries of the hydrodynamic journal bearing—a non‐trivial test problem for which a known analytical solution is available. The computational advantage of the coupled Stokes–Reynolds method is illustrated on an industrially applicable fully‐flooded deformable‐roll coating example. The examples in this paper are limited to two‐dimensional Stokes flow, but extension to three‐dimensional and Navier–Stokes flow is possible. Copyright © 2003 John Wiley & Sons, Ltd.     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

On the tribological characteristics of dynamically loaded journal bearing with micropolar fluids

The addition of the additives to the lubricant oil to enhance the characteristics of the lubricant will influence the performance of the bearings. Based on the theory of micropolar fluids, the tribological characteristics of a dynamically-loaded journal bearing are numerically studied. Comparisons are made between the Newtonian fluids and the micropolar fluids. It is shown that for a dynamically-loaded journal bearing, the micropolar fluids yield an increase not only in the friction force, but also in the friction coefficient. In addition, the oil film pressure and the oil film thickness are obviously higher than that of Newtonian fluids.     

Novel route to synthesis of allyl starch and biodegradable hydrogel by copolymerizing allyl‐modified starch with methacrylic acid and acrylamide

Maize starch was modified by allyl chloride adopting an interfacial reaction technique with cetyltrimethyl ammonium bromide as a phase‐transfer catalyst and pyridine as an acid acceptor. The degree of substitution was determined from an increasing carbon content of the modified starch. The percentage of carbon and hydrogen of the allyl‐modified starch was estimated by elemental analysis (C, H, and N), and the product characterization was done through ¹H NMR and ¹³C NMR analyses. The allyl‐modified starch was then copolymerized with methacrylic acid and a combination of methacrylic acid and acrylamide at 50 and 70 °C with potassium persulfate as an initiator. The copolymer thus formed swelled in distilled water after neutralization with sodium carbonate. The percentage of absorption capacity of the hydrogels was determined with distilled water and 0.9% NaCl solution. The highest percentage of absorption, 6500%, was achieved for the developed hydrogel containing allyl starch and acrylic monomer in a 1.7:1 w/w ratio and acrylic monomer, namely, methacrylic acid and acrylamide in a 3.2:1 w/w ratio. The study on biodegradability of the developed hydrogel showed that the hydrogel is degradable in the presence of diastase (amylase). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1650–1658, 2003     

Macroscopic non-equilibrium thermodynamics in dynamic calorimetry

What is really measured in dynamic calorimetric experiments is still an open question. This paper is devoted to this question, which can be usefully envisaged by means of macroscopic non-equilibrium thermodynamics. From the pioneer work of De Donder on chemical reactions and with other authors along the 20th century, the question is tackled under an historical point of view. A special attention is paid about the notions of frequency dependent complex heat capacity and entropy production due to irreversible processes occurring during an experiment. This phenomenological approach based on thermodynamics, not widely spread in the literature of calorimetry, could open significant perspectives on the study of macro-systems undergoing physico-chemical transformations probed by dynamic calorimetry.     

微加工薄膜变形镜特性分析

 借助测量微加工薄膜变形镜驱动器的面形影响函数，分析了驱动器的电压-位移函数和驱动器之间的线性叠加性;通过对连续面形变形镜拟合像差的理论分析和实验研究，建立了微加工薄膜变形镜电压解耦模型。分析了对前36阶Zernike模式的拟合残差和拟合能力，指出微加工薄膜变形镜仅可用来拟合低级像差并且有较大的拟合能力和较小的拟合残差，而不能拟合高级像差。     

变频压缩机空调系统的理论分析及实验研究

变频空调器是由变频压缩机驱动的空调系统,压缩机通过变频调节其转速使压缩机单位时间内的排气量变化,从而达到调节制冷量的目的。本文提出了变频空调器制冷系统的原理和设计方法,具体给出了制冷量和压缩机频率的关系方程,并从理论和实验两方面对变频空调器制冷系统进行了分析,得到了频率曲线图,为变频空调器制冷系统的设计提供了依据。     

Lemniscates and inequalities for the logarithmic capacities of continua

It is shown that if P(z) = z ⁿ + ? is a polynomial with connected lemniscate E(P) = {z: ¦P(z)¦ ≤ 1} and m critical points, then, for any n? m+1 points on the lemniscate E(P), there exists a continuum γ ? E(P) of logarithmic capacity cap γ ≤ 2^?1/n which contains these points and all zeros and critical points of the polynomial. As corollaries, estimates for continua of minimum capacity containing given points are obtained.     

Finite turns and the regular closure of linear context-free languages

Turn bounded pushdown automata with different conditions for beginning a new turn are investigated. Their relationships with closures of the linear context-free languages under regular operations are studied. For example, automata with an unbounded number of turns that have to empty their pushdown store up to the initial symbol in order to start a new turn are characterized by the regular closure of the linear languages. Automata that additionally have to re-enter the initial state are (almost) characterized by the Kleene star closure of the linear languages. For both a bounded and an unbounded number of turns, requiring to empty the pushdown store is a strictly stronger condition than requiring to re-enter the initial state. Several new language families are obtained which form a double-stranded hierarchy. Closure properties of these families under AFL operations are derived. The regular closure of the linear languages share the strong closure properties of the context-free languages, i.e., the family is a full AFL. Interestingly, three natural new language families are not closed under intersection with regular languages and inverse homomorphism. Finally, an algorithm is presented parsing languages from the new families in quadratic time.     

LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.