The gas phase reaction between CO2 and lanthanide atoms. A test of a model for the isokinetic effect

Summary Co₃O₄, NiCo₂O₄ and LaCo₂O₄catalysts were synthesizedby the citric acid-ligated method. These catalysts containing Co-oxide active components can largely lower the temperature of soot combustion under tight contact conditions. Under the conditions of loose contact NiCo₂O₄ cannot promote soot combustion, but LaCo₂O₄ can effectively promote soot combustion because the nanometric perovskite-type catalyst LaCoO₃produced in the LaCo₂O₄sample.</o:p>     

二氧化碳氧化剂在烷烃催化转化反应中的应用研究进展

本文综述了近年来国内外有关利用二氧化碳作为氧化剂在烷烃催化转化反应中的研究状况。担载型的金属氧化物催化剂具有较好的催化活性。催化剂表面碱性位的存在可稳定活性中心并且有利于CO2的活化，CO2的作用是与烷烃脱氢产物H2和生成的表面积炭反应，从而提高反应活性及催化剂的稳定性。     

原位漫反射红外光谱研究氮氧化物在Ag-ZSM-5催化剂上的吸附态及选择性催化还原反应机理

利用原位分析方法对催化剂表面吸附态进行动态表征，对了解催化反应机理具有重要的意义。漫反射红外光谱是一种理想的原位方法，应用该方法在298－773K范围原位考察了以丙烯为还原剂，NO在Ag-ZSM-5催化剂上的吸附态及选择性催化还原过程。认为NO的选择性催化还原符合直接作用机理，还原的关键是形成有机－氮氧化物（R－NO2或R－ONO）中间体。O2的作用是使C3H6充分活化，并是有效产生有机－氮氧化物不可缺少的条件。     

镧掺杂粘土源含铜氧化物催化剂的制备、表征及催化性能

采用共沉淀和水热法合成了不同阴离子粘土前驱型复合氧化物催化材料,样品经XRD,FTIR,TPR,TG-DSC,SEM进行表征.同时考察了铜含量在掺杂和不掺杂稀土时对甲烷催化燃烧的影响,结果发现随含铜量增加催化活性增加;未掺杂La的催化剂在高温下出现失活现象,而掺杂型催化剂稳定性良好.同时,制备方法对催化剂的性能有显著影响,在不同制备前驱物pH的条件下,使用共沉淀和水热法合成的阴离子粘土材料,合成时的pH均对催化剂的活性影响较大;同时焙烧温度对催化活性有不同程度的影响.     

Sm修饰的Ni-MgO催化剂制备碳纳米管的研究

Carbon nanotubes (CNTs) have been synthesized over Ni-MgO and Ni-Sm-MgO catalysts by decomposition of CH₄ at 650 ℃. The addition of Sm into Ni-MgO catalyst not only promotes the catalytic activity and lifetime of the catalyst, but also improves the graphitization and heat stability of carbon nanotubes. The yield of CNTs obtained over the Ni-10Sm-MgO catalyst reaches 33 g C·(g Ni)^-1, being more than 5 times higher than that of the Ni-MgO catalyst. XRD and TPR results of the catalysts indicate that there is a remarkable interaction of Ni with Sm species, which facilitates the reduction of nickel and restrains the Ni particles from agglomerating.     

甲烷磺酸盐的合成、表征及其催化酯化反应的性能

Methane-sulfonate of copper, cobalt, zinc, lanthanide, praseodymium and neodymium are synthesized and characterized by FTIR and TGA. Methane-sulfonates are used as the catalysts in the esterification of chloroacetic acid with isopropanol. Catalytic activity of methane-sulfonates is studied and compared with other Lewis acids. Under the condition of 1.2/1 molar ratio of isopropanol to chloroacetic acid, 1% catalyst (molar percent of chloroacetic acid), 2.5h reaction time, 80～85℃ temperature and benzene as water-carrying agent. The experi-mental results showed that catalytic activity of Lanthanide methane-sulfonate was the best, the yield of isopropyl chloroacetate reaches 88.7%. Copper methane-sulfonate can be reused for three times without distinct loss of catalytic activity.     

Fe-Ni-B-O纳米合金的合成及其催化制氢性能的研究

Preparation and catalytic performance of Fe-Ni-B-O nano-alloy having crystal-palpus structure has been studied. Black powder was synthesized by reducing mixture solution of Fe²⁺, Ni²⁺ with KBH₄ as reducing agent and polyethylene glycol as dispersant. Fe-Ni-B-O nano-alloy of crystal-palpus structure was obtained after hydrogen reduction of black powder. TEM shows that crystal-palpus length is 200～400 nm, diameter is 2～4 nm. The analytic results indicate that the total content of Fe and Ni is 86.6%, B is 5.08%. The alloy exhibits excellent catalytic performance. Hydrogen generation rate can approach 100% especially when pH is 8.     

超细Ni-Cu-Co-La的制备及其催化乙腈加氢性能

以水合肼和硼氢化钾为共还原剂制备了四元合金催化剂Ni-Cu-Co-La,并将其应用于乙腈催化加氢反应.采用X射线衍射、X射线光电子能谱、透射电镜和H2程序升温脱附对催化剂进行了表征,考察了催化剂组分对乙腈选择性加氢制乙胺催化性能的影响.结果表明,Cu,Co和La的加入均不同程度地提高了催化剂的活性和选择性,在反应压力1.8 MPa,反应温度120℃,反应时间1 h的条件下,乙腈转化率和乙胺选择性分别为100%和98.24%,优于使用Raney Ni、非晶态Ni-B和Co-B合金催化剂时的结果.     

Thermal Study of the Cr-Mo-O System in Air

The phase diagram of the ternary system Cr-Mo-O in air was established from the results of thermal analysis of mixtures with different initial CrO3 to MoO3 ratios. It was found that MoO3 did not take any chromium oxide into solid solution. The presence of Cr2O3 destabilized MoO3 causing it to decompose to MoO2 in the temperature range 723-958 K depending on the initial Cr/Mo ratio. The decomposition of pure MoO3 MoO2 did not occur in air at any temperature. However, this decomposition took place through the formation of the compound Cr2O3·3MoO3(ss) and its decomposition to Cr2O3·3MoO2(ss). The latter compound has never been reported before and the X-ray data for this compound are given. The previously reported catalytic activity of Cr2O3·3MoO3(ss), at high temperatures, is presumably due to its reduction to Cr2O3·3MoO2(ss). This revised version was published online in July 2006 with corrections to the Cover Date.     

超声波辅助Ru-B非晶态合金常压催化肉桂醛加氢制备肉桂醇

采用KBH₄化学还原法制备了超细Ru-B非晶态合金催化剂。Ru-B催化剂在肉桂醇液相常压加氢中显示出较高的肉桂醇选择性。在加氢过程中使用超声辐射能大大提高反应速率而肉桂醇的选择性几乎保持不变。加氢速率随着超声频率或超声时间的增加而增加。通过XRD、XPS、TEM、BET和ICP等各种表征手段，简要研究了超声辐射对Ru-B催化剂结构和电子特征的影响。同时，还讨论了超声对肉桂醛选择性加氢制肉桂醇催化性能的促进作用。