喷水推进器推力的CFD计算方法研究

简要介绍获取喷水推进器推力的理论、试验及数值计算(CFD)方法,重点研究采用动量流量法和壁面积分法计算喷水推进器推力的CFD方法。采用多块网格技术,用六面体结构化网格和四面体非结构化网格相结合的混合网格离散计算区域,采用稳态多参考系方法求解RANS方程,对喷水推进器进水流道、叶轮、导叶体和喷口所组成的整个流场进行数值计算。计算中采用了k-ε湍流模型和标准壁面函数,对用动量流量法计算推力方法中所需的假想流管分界面和进口面的求取做了分析,将两种方法计算的推力与厂商提供的推力特性曲线进行了对比。结果表明,采用CFD计算和分析方法来研究喷水推进系统推力性能是可行、可信的。     

流动注射-电化学-表面等离子体激元共振联用技术研究二茂铁硫醇氧化还原结构变化

采用流动注射-电化学-表面等离子体激元共振联用技术研究了11-二茂铁基十一烷基-1-硫醇自组装膜在氧化还原过程中的构型变化.结果表明,二茂铁硫醇在氧化过程中,分子发生了两种结构变化:远离电极表面,烷基链与电极表面的夹角增大;分子上两个平行的戊基环绕着二茂铁-碳轴发生旋转.     

螺线管场下强流相对论电子束焦斑尺寸的限制

 分析了螺线管场下影响强流相对论电子束聚焦的主要因素,并给出了各影响因素所限制的最小焦斑。计算结果表明,当发射度和能散度的值分别控制在0.397mm× rad和1%以内, 单个螺线管磁轴的偏心不大于0.54mrad,初始注入束偏心不大于1mrad时,对于20MeV、3kA的电子束和15MeV、2.5kA的电子束,最终打靶束焦斑均可小于1.5mm。     

基于摩擦磨损的KDP晶体固结磨料抛光垫优化

本文通过固结磨料球与KDP晶体对磨的单因素试验探究固结磨料球中反应物种类、磨粒浓度、反应物浓度、基体硬度对摩擦系数、磨痕截面积和磨痕处粗糙度的影响,试验结果表明:KHCO₃固结磨料球对磨后磨痕对称性好,磨痕处的粗糙度值低;磨痕截面积随磨粒和反应物浓度的增加而增大,随基体硬度的增大而降低;磨痕处粗糙度随磨粒和反应物浓度的增加先降低后上升,随基体硬度的增大先上升后降低;摩擦系数受磨粒和反应物浓度影响不明显,随基体硬度的增大而降低。选择KHCO₃作为反应物,Ⅰ基体,磨粒浓度为基体质量的100%,反应物浓度为15%制备固结磨料球与KDP晶体对磨后的磨痕轮廓对称度好且磨痕处粗糙度值低,以该组分制备固结磨料垫干式抛光KDP晶体,可实现晶体表面粗糙度Sa值为18.50 nm,材料去除率为130 nm/min的高效精密加工。     

自润滑轴承失效原因的XPS分析

用Ｘ射线光电子能谱仪（ＸＰＳ）对失效前后的自润滑轴承各部件表面的化学组成及其状态进行了分析，结果表明失效前后表面性质差异较大，失效是由于自润滑膜破损耗尽所致。     

Simulation on topography of superfinished roller surfaces

As a final process in roller bearing manufacturing, Through Centerless Superfinishing is of great importance to the performance of bearings. Applied loads, rotational speeds, reciprocating frequencies and amplitude of superfinishing stones are crucial parameters, which mainly influence the surface topography, and are difficult to be adjusted to achieve optimal superfinishing effect, so product quality is unstable in practice. A superfinishing model is firstly established, which includes cutting and motion models. And then a simulation method is presented to form the topography on the condition of various combinations of the above three parameters, the effect of every parameter on the topography being clarified. This work provides a useful means to select reasonable combination of superfinishing parameters for roller bearing buildings.     

Ferroelectric compounds with chiral (S)-1-methylheptyloxycarbonyl terminal chain – their miscibility and a helical pitch

Compounds with the same chiral terminal chain but different structure of rigid core and non-chiral terminal chain were added to basic highly tilted ferroelectric compound in the aim of establishing whether the miscibility of phases, especially ferroelectric phase, exists in these compounds and what are the helical pitch and tilt angle temperature dependence in bicomponent systems. In certain systems, we obtained a mixture with very short helical pitch at broad temperature range of ferroelectric phase, which open opportunities for the formulation of multicomponent mixtures for fast switching ferroelectric liquid crystals modes.     

Effects of Motion, Implied Direction and Displacement of a Large-Visual-Stimulus on Postural Control

Effects of motion, implied direction in a static stimulus and displacement on postural control were examined independently. In Experiment 1, rotation of a random-dot stimulus was presented. In Experiments 2 and 3, photographic slides of natural scenes were used; participants closed their eyes during stimulus rotation to eliminate motion information. In Experiment 2, the stimulus was presented upright initially, then presented again with a tilt. In Experiment 3, the order was reversed to separate the effects of implied direction and displacement. Results showed that all information of motion, implied direction, and displacement had some effect on postural control, although visual information of motion has been presumed to have a principal effect on postural control. Results suggested that the effects of implied direction might reflect an immediate processing of information. The effects of displacement and motion might reflect a continuous processing of information.     

轴向数控磁力轴承系统的研究

本文建立了轴向磁力轴承的动力学方程和数学模型 ,阐述了基于数学模型分析的数字控制系统的设计方法 .介绍了本课题设计的新型数字控制系统 .试验表明该系统具有较好的控制稳定性和运转稳定性 ,具有较强的承载力 .     

Depth-dependent mosaic tilt and twist in GaN epilayer:An approximate evaluation

An approach based on depth-sensitive skew-angle x-ray diffraction （SAXRD） is presented for approximately evalu- ating the depth-dependent mosaic tilt and twist in wurtzite c-plane GaN epilayers. It is found that （103） plane and （101） plane, among the lattice planes not perpendicular to the sample surface, are the best choices to measure the depth profiles of tilt and twist for a GaN epilayer with a thickness of less than 2 μm according to the diffraction geometry of SAXRD. As an illustration, the depth-sensitive （103）/（101） ω-scans of a 1.4-μm GaN film grown by metal-organic chemical vapor deposition on sapphire substrate are measured and analyzed to show the feasibility of this approach.