Deux methodes photothermiques a l'etude d'une preparation de contact d'un melange binaire de cristaux liquides

The photopyroelectric (PPE) method is proposed as a sensitive technique to study a binary mixture of liquid crystals in a contact preparation. The photothermal signal is generated while scanning the contact preparation. The crystal-smectic A, smectic A-nematic, and nematic-isotropic interphase boundaries are detected. The displacement of these boundaries due to the variation of the temperature is monitored. The study of these displacements allows us to draw the complete temperature-concentration phase diagram of a binary mixtures. This revised version was published online in August 2006 with corrections to the Cover Date.     

超疏水涂膜的研究进展

超疏水涂膜以其独特的性能，在国防、工农业生产和日常生活中有着广泛的应用前景。但目前的制备技术制约了其在建筑外墙涂料等大型设施方面的应用。探索如何采用简单有效的方法构造和调控涂膜的双微观结构，从而获得性能持久优异的超疏水性涂膜，并有效应用于生产和生活的各个方面是这一领域研究的最终目标。本文就超疏水材料表面理论的发展和近几年来超疏水膜制备技术取得的新成果进行了概括，并指出制备超疏水涂膜存在的问题和发展方向。利用表面能极低的含氟材料，将溶胶－凝胶、相分离技术和自组装梯度功能等技术有机结合，获得适宜的表面粗糙度和微观构造，是实现超疏水涂膜工业化生产的可行途径。     

Influence of drawing and heat treatment on surface free energies of polyethylene terephthalate fibers

The surface free energies of polyethylene terepthalate fibers with different draw ratios were experimentally determined by contact angle measurements inn-alkane/water systems. The dispersive component of the surface free energy increased with increasing draw ratio, whereas the nondispersive one remained almost constant. After heat treatment, the dispersive surface free energy increased, but was reduced above 140°C. The nondispersive component increased by heat treatment at 190°C. The increases in the density and birefringence of the fibres due to the drawing and heat treatment suggested that the increase in the dispersive surface free energy was caused by the increase in the atomic density at the fiber surface due to drawing and heat treatment. ESCA results indicated that the increment in the nondispersive surface free energy due to heat treatment was caused by the addition of functional groups to the fiber surface due to heat treatment.     

Second-order nonlinear optical properties of side-chain liquid crystalline polymers studied by second harmonic generation from thin films

The two independent elements of the second-order nonlinear optical susceptibility tensor of a range of contact poled, donor–acceptor substitued side-chain polymers are reported. The susceptibilities were measured by second harmonic generation from thin films, typically less than 0.5 μm thick, at a fundamental wavelength of 1064 nm. The largest value was χ = 2.64 pm/V which is three times greater than the χ value of KDP and was measured in a nitrobenzylidene side chain, polyhydroxystyrene polymer with an eleven unit alkyl chain spacer attaching the side group to the backbone. Typical susceptibility values obtained were χ～0.3 pm/V and X⁽²⁾₃₃～1 pm/V. The coherence lengths of the materials, which lay in the range 4–12 μm, were measured at 1064 nm by the maker fringe technique using thick, wedge-shaped samples.     

Theoretical Study on the Dark Oxidation Reaction Mechanism of Ethers

1 INTRODUCTION Ethers are a kind of organic compounds that are easily oxidized under the conditions of lacking light and any additional excitement. According to dif- ferent mechanisms, the oxidation reactions could be classified into two types: photooxidation reaction and dark oxidation reaction. The former is the reaction with excited state oxygen molecule (singlet state), while the latter is the reaction with ground state oxygen molecule (triple state) without illuminance or any exciter…     

Origin and meaning of the Fermi contact interaction

The Fermi-contact interaction (FCI) can easily be derived from 1st order perturbation theory applied to the non-relativistic wave equation for a spin-(1/2) particle of Lévy-Leblond, with the nuclear spin described by the field of an external magnetic dipole, and it results from the fact that the turn-over-rule for the operator is only valid if the derivatives implicit in are taken in the distribution sense. If one avoids to apply the turn-over-rule, the FCI is obtained without the need to introduce a -function. It is also shown that the formulation of a magnetic point dipole as the limit of an extended nucleus directly leads to the FCI. Traditional methods of the derivation of the FCI are analyzed in the light of this new interpretation. It is then explained why the perturbation expansions in powers of the magnetic moment of the nucleus necessarily diverges, but that the expression for the 1st order energy on which the concept of the FCI is based, can nevertheless be justified by means of the Hellmann-Feynman theorem with a correction term if singular wave functions are involved. Finally some comments on a theory beyond first order are made.Dedicated to Professor J. Koutecký on the occasion of his 65th birthday     

Standard pseudo-Hermitian structure on manifolds and seifert fibration

A strictly pseudoconvex pseudo-Hermitian manifoldM admits a canonical Lorentz metric as well as a canonical Riemannian metric. Using these metrics, we can define a curvaturelike function onM. AsM supports a contact form, there exists a characteristic vector field dual to the contact structure. If induces a local one-parameter group ofCR transformations, then a strictly pseudoconvex pseudo-Hermitian manifoldM is said to be a standard pseudo-Hermitian manifold. We study topological and geometric properties of standard pseudo-Hermitian manifolds of positive curvature or of nonpositive curvature . By the definition, standard pseudo-Hermitian manifolds are calledK-contact manifolds by Sasaki. In particular, standard pseudo-Hermitian manifolds of constant curvature turn out to be Sasakian space forms. It is well known that a conformally flat manifold contains a class of Riemannian manifolds of constant curvature. A sphericalCR manifold is aCR manifold whose Chern-Moser curvature form vanishes (equivalently, Weyl pseudo-conformal curvature tensor vanishes). In contrast, it is emphasized that a sphericalCR manifold contains a class of standard pseudo-Hermitian manifolds of constant curvature (i.e., Sasakian space forms). We shall classify those compact Sasakian space forms. When 0, standard pseudo-Hermitian closed aspherical manifolds are shown to be Seifert fiber spaces. We consider a deformation of standard pseudo-Hermitian structure preserving a sphericalCR structure.Dedicated to Professor Sasao Seiya for his sixtieth birthday     

在"高聚物的结构与性能"课程中应该引入的几个新概念

在“高聚物的结构与性能”课程教学中，很有必要向学生介绍高分子科学近十几年来的发展，尤其是在高分子凝聚态基本物理问题上的研究成果以及相关的新概念、新知识，特别是我国学者的贡献。本文较为详细地讨论了近年来作者在教学中介绍的几个新概念，如：动态接触浓度、单链凝聚态、凝聚缠结等。     

Surface properties of ω-perfluorooctyl-alkyl polyacrylates: odd–even effect

A series of ω-perfluorooctyl-alkyl polyacrylates has been prepared and analysed. The odd–even effect, already observed in the case of liquid crystalline polymers has been exhibited for perfluorinated ones. Values of the contact angles to advanced (θ_a), with withdrawal (θ_r), as well as the contact angle hysteresis (Δθ) of various ω-perfluorooctyl-alkyl polyacrylates in water at 20 °C are described. Contrary to the advancing contact angle which is almost independent of spacer length, the receding one varies strongly with it.     

The effect of interface deformation due to gravity on line tension measurement by the capillary rise in a conical tube

Much research has been done on line tension measurement and interpretation, and attempts have also been made to measure line tension with simple, cheap and reliable methods that do not require excessive sophistication. Of particular interest is the method of determining line tensions of solid–liquid–vapor systems from the capillary rise in a conical tube. This simple and relatively inexpensive method gives line tension values comparable to those reported in the literature obtained via highly sophisticated instruments or techniques such as the well known axisymmetric drop shape analysis technique. The absolute value of line tension obtained using the conical tube method and assuming a spherical liquid–vapor interface is larger but of the same order of magnitude (1 μJ m⁻¹) as that reported in the literature. A theoretical analysis presented herein shows that by including the deformation of the liquid–vapor interface due to gravity in the conical capillary analysis, the line tension value inferred from the experimental data is reduced by approximately 50% and compares better with values in the literature obtained using other sophisticated methods. Thus a relatively simple, cheap, accurate and reliable method of line tension measurement has been advanced.