主链含硅聚芳酯的合成及气体透过性能的研究

以双［对－酰氯苯基］二甲基硅烷和酚酞、四溴酚酞以及双酚Ａ为原料，合成了三种主链含硅聚芳酯，并对聚合物相关的物理性质进行了表征，制成了均质透明的薄膜．采用低真空法测定这些聚合物对Ｈ２、Ｏ２、Ｎ２、ＣＯ２、ＣＨ４的气体透过速率，并计算出气体透过系数、扩散系数、溶解系数、分离系数．从气体透过性能与聚合物分子结构关系的角度，按照气体透过的溶解－扩散机制，对聚合物的气体透过性能进行了研究，而且着重讨论了聚合物的堆积密度对气体扩散系数的影响，以及聚合物主链中极性链段的百分含量对气体溶解系数和溶解选择性的影响。     

LaNi4.7Al0.3单颗粒微电极电化学行为的研究

报道了一种单颗粒微电极制备新方法, 并研究了LaNi4.7Al0.3球形单颗粒微电极的电化学行为.     

水热法合成K0.5Bi0.5TiO3纳米陶瓷粉体

K_0.5Bi_0.5TiO₃(KBT)nanocrystalline particles were hydrothermally synthesized from Bi(NO₃)₃·5H₂O, TiO₂ and KOH. The crystal phase, chemical composition and microstructure were characterized by XRD, XRF, Raman scattering spectroscopy and TEM. The results indicated that the products were pure perovskite structured K_0.5Bi_0.5TiO₃ with chemical stoichiometry and perovskite structure. The TEM observation revealed that the particles possessed a feature of cubic shape and a nano-scale of about 40 nm. The KBT ceramics sintered at 1 040 ℃ from hydrothermal powders show higher density and better electric properties than that prepared by a solid-state reaction method.     

Hygrometric Determination of Water Activities and Osmotic and Activity Coefficients of NH4Cl–LiCl–H2O at 25°C

The mixed aqueous electrolyte system of ammonium and lithium chlorides has been studied by the hygrometric method at 25°C. The relative humidities of this system are measured at total molalities from 0.3 to 6 mol-kg^{– 1} for different ionic-strength fractions y of NH₄Cl with y = 0.33, 0.50, and 0.67. The data obtained allow the deduction of new water activities and osmotic coefficients. The experimental results are compared with the predictions of the ECA (extended composed additivity) law proposed in our previous work. The Zdanovskii–Stokes–Robinson (ZSR), the Robinson–Stokes (RS), Reilly–Wood–Robinson (RWR), the Pitzer, and the Lietzke–Stoughton (LS II) models are also compared with our results. Predictions made using these models are, in general, consistent with our results. From these measurements, new Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture for different ionic-strength fractions.     

PSF/TiO2杂化超滤膜形成过程的热力学和动力学研究

采用溶胶-凝胶法制备了不同纳米TiO₂含量的聚砜(PSF)/TiO₂杂化超滤膜, 研究了TiO₂浓度对聚砜铸膜液流变学及热力学性质的影响, 构建了计算成膜过程中表观扩散系数(D_a)的新方法, 求出不同TiO₂浓度及温度下的D_a值, 进而剖析了铸膜液流变学和热力学性质的变化对成膜动力学的影响. 并通过扫描电镜观察、杂化膜孔隙率和超滤性能的测试考察了表观扩散系数与膜结构和性能的关系. 结果表明, 加入TiO₂溶胶的PSF铸膜液由牛顿流体转变为非牛顿流体, 其粘度随TiO₂浓度增大而增大. TiO₂的加入减小了铸膜液对非溶剂的容纳能力, 加速铸膜液的液-液相分离, 同时TiO₂引起的热力学促进作用和流变学阻碍作用相互竞争, 共同影响D_a的变化. 实验得出, D_a随温度升高而增大, 随TiO₂浓度的增大有先增大后减小的趋势. 表观扩散系数D_a与膜的结构和性能具有很好的相关性并能直观地描述整个成膜过程.     

Crystallization kinetics of the monoclinic modification of poly(3,3-dimethyl oxetane)

Poly(3,3-dimethyl oxetane) fractions ranging in number average molecular weights from 18500 to 130000 have been isothermally crystallized from the relaxed melt state in the temperature range from 12 to 44 °C, where only the monoclinic modification is formed. The influence of molecular weight and undercooling in crystallization kinetics has been analyzed. The level of crystallinity is very slightly dependent on molecular weight but the influence of this parameter on the time scale of the crystallization is relatively pronounced. The crystallization temperature coefficient was determined and it was found a constant value of the product of the interfacial energies in the range of molecular weights which has been analyzed. Growth rate measurements were carried out for fraction ¯M _n=130000 and it was found that the temperature coefficients for overall and growth rates are equal. Finally, the comparison of the experimental results for this polymer with those reported for poly(oxetane) shows two main differences: first, the crystallization rate is slower for poly(3,3-dimethyl oxetane) and second, the temperature coefficient is smaller for this polymer.     

Aqueous Solubilities, Infinite Dilution Activity Coefficients and Octanol–Water Partition Coefficients of Tricyclic Analogs of Acyclovir

Solubilities of tricyclic analogs of acyclovir have been determined in water at 25, 35, and 45°C and in octanol, water-saturated octanol, and octanol-saturated water at 25°C. Octanol-water partition coefficients were determined at 25°C. Melting temperatures and molar enthalpies of fusion were measured. Activity coefficients in water, octanol, and in aqueous octanol solutions were determined and are discussed. The effect of hydrophilic and hydrophobic substituents in the tricyclic analogs on their thermodynamic properties are discussed. The standard Gibbs energy of transfer between the saturated phases were found to correlate with known values of the melting point of the solvents and the solubilities of the solute. For a number of the compounds examined, correlations between the minimum inhibitory concentration against the herpes simplex virus type 1 (HSV-1) and type 2 (HSV-2), varicella-zoster virus (VZV), thymidine kinase-deficient (TK^–) strains of VZV and were established. Detailed conclusions have been derived concerning the relationships between the structure and the thermodynamic parameters of the compounds examined.     

Comparison between potentiostatic and galvanostatic intermittent titration techniques for determination of chemical diffusion coefficients in ion-insertion electrodes

Using well-cycled, thin composite graphite electrodes we analyze carefully the limitations of potentiostatic and galvanostatic intermittent titration techniques (PITT and GITT, respectively) for determination of the differential (incremental) intercalation capacitance, C_dif, and the chemical diffusion coefficient, D, of Li ions in these ion-insertion electrodes (IIEs). We demonstrate the superiority of the GITT over PITT to determine these quantities as the former technique allows for a more accurate determination of C_dif and hence D which closely approach to the spinodal domain related to the first-order phase transition during ion-insertion. We show that GITT is also more effective in eliminating the parasitic contributions of background currents to the total measured response. A pronounced difference in the initial, intrinsic kinetics of formation of a new phase in the bulk of the old one has been observed depending on the direction of titration (phases less saturated with Li are formed faster during deintercalation than the Li-rich phases in the course of intercalation).     

Sound velocity in different reacting thermal plasma systems

In most cases the energy dissipated in plasma jets used either,for heating or spraying is varied by changing the are current, the total gas floc+rate, and composition. However, when doing so, conditions are reached where the plasma jet may become supersonic. To predict such conditions or to characterize supersonic plasma jets the knowledge of the sound velocitya is mandatory The goal of this paper is to calculatea versus plasma forming gas composition, temperature, and pressure. Rigorous calculation would imply the knowledge of the chemical reaction kinetics, sound velocity depending strongly on this. Unfortunately such kinetics are generally lolknown for plasma jet floras and the only possibility is to determine the equilibrium sound velocitya calculated through the isentropic coefficient T. This coefficient has been calculated taking into account the dissociation and ionization reactions at equilibrium for temperatures ranging from 300 to 25,000 K and pressures between 0.1 and 1 Mpa for Ar, H₂, He, Ar-He, Ar-H₂, O₂, N₂, air, .steam, and methane.a often called the frozen sound velocity, was also calculated using (ratio of specific heats) instead of .     

Sulfonated poly(ether ether ketone)/poly(amide imide) polymer blends for proton conducting membrane

Poly(amide imide) (PAI) was synthesized using 1,2,4-benzenetricarboxylic anhydride (BTBA) and 4,4′-methylenebis(phenyl isocyanate) (MBPI). SPEEK/PAI blend membranes were prepared and investigated by NMR, GPC, FT-IR and AFM. The chemical structures of PAI and SPEEK were characterized by using NMR and FT-IR. The adsorption of the SPEEK/PAI blend membrane of water or methanol solution was also characterized. The significant swelling of the blend membrane in concentrated methanol solution was explained by the solubility parameter. The water diffusion coefficient (D_H2O) was related to the lambda value of the membrane. The SPEEK/PAI blend membrane had a lower proton conductivity and methanol permeability than Nafion. However, the relative selectivity (proton conductivity divided by methanol permeability) of the SPEEK/PAI 70/30 (w/w) blend membrane was 3.46 × 10⁴ S s cm⁻³, which is closed to that of Nafion (3.30 S s cm⁻³).