Characteristics of vinyl iodide microwave plasma etching of GaAs/AlGaAs and InP/InGaAs heterostructures

Vinyl iodide (C₂H₃I) microwave discharges with additions of H₂ and Ar are found to provide faster etch rates than conventional CH₄/H₂/Ar discharges for InP, InGaAs, GaAs, and AlGaAs. This is a result of the relatively high volatilities of indium, gallium, and aluminum iodide species. The etched features are smooth and anisotropic over a wide range of do self-biases (–150 to –350 V), process pressures (1–20mTorr), and microwave powers (150–500 W). The polymer that forms on the mask during the plasma exposure can be readily removed in O₂ discharges. Electron spectroscopy for chemical analysis (ESCA) showed that the etched surfaces are slightly deficient in the group V elements under most conditions, but changes to the optical properties of the semiconductors are minimal. No defects are visible by transmission electron microscopy (TEM) in GaAs or InP samples etched at dc biases –250 V.     

Synthesis and Crystal Structure of N-cyclopropyl-9 -（3,4-dicholophenyl）- 1,2,3,4,5,6,7,8,9,10-decahydroacridine -1,8-dione under Microwave Irradiation

1 INTRODUCTION aryl or methyl group to the nitrogen atom of these compounds leads to enhanced activities of fluo- A lot of natural and synthetic compounds con- rescence[7, . Since the pyridine scaffold is included 8] taining acridine skeletons display interesting biolo- in decahydroacridine-1,8-dione, a question is whether gical and physical activities[1]. Acridinedione, for the same modification on the nitrogen atom of de- example, has been identified as antimalarial and cahydroacridine-1…     

柴油机烟碳的微波加热燃烧Ⅲ.铜催化剂的影响

柴油机烟碳的微波加热燃烧Ⅲ．铜催化剂的影响吕晓慧马建新李平朱兵刘士宁（华东理工大学工业催化研究所，上海２００２３７）方明刘毅庭（香港科技大学研究中心）关键词柴油机烟碳，微波加热，催化燃烧，铜催化剂作者在前文［１，２］研究了柴油机烟碳的微波加热燃...     

微波聚合制备单分散、超细聚甲基丙烯酸甲酯微球

在微波辐照下,通过甲基丙烯酸甲酯(MMA)的无乳化剂乳液聚合,制备出粒径单分散、超细聚甲基丙烯酸甲酯(PMMA)微球。微波显著缩短聚合诱导期,加快聚合反应,其部分原因是微波加快引发剂过硫酸钾(KPS)的分解。实验证明微波辐照下KPS的表观分解活化能(ED)由128.3kJ/mol降低到106.0kJ/mol。单体浓度是影响PMMA乳液粒子尺寸的主要因素,在[MMA]小于0.3mol/L时,平均粒径随单体浓度提高而线形增加;[MMA]为0.3～1.0mol/L时,平均粒径稳定在约200nm;之后随单体浓度进一步增加,乳液稳定性变差。引发剂浓度增加对平均粒径影响较小,但增大引发剂浓度可显著降低粒径分散度。选取[MMA]为0.23～0.3mol/L、[KPS]为3×10-3～6×10-3mol/L可以得到粒径200nm的单分散微球。以丙酮/水(体积比1/3)为反应介质,可制备出数均粒径45nm的PMMA纳米粒子。在体系中加入3.5×10-3mol/L的Cu2+,可制备出数均粒径67nm、单分散的PMMA纳米粒子。     

Reactions in a Mixture of CH4 and CO2 under the Aciton of Microwave Discharge at Atmospheric Pressure

Reactions between CH4 and CO2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor,The main products were CO and H2,while acetylene and ethylene were also found in the products.Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst,Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.     

Digests or extracts?—Some interesting but conflicting results for three widely differing polluted sediment samples

Three sets of samples have been investigated in some detail. One set is from a river polluted by mine workings, containing substantial levels of Fe, Mn,Cu, Zn and Ni with traces of many other metals. The second set consists of typical estuarine sediments contaminated from a wide range of industrial sources, and the third set consists of oily drilling cuttings from the sea bottom in the vicinity of a North Sea oil production platform.These samples have been subjected to treatment 1) with EDTA at two different pH's (extracts) 2) with HNO₃/H₂O₂ 3) with HNO₃/HCl and 4) with HNO₃/HCl/HF (digests). EDTA recoveries, compared toaqua regia digests, are often very reproducible, not dependent on pH, and usually significantly low. Nitric/peroxide andaqua regia digests often give very close results suggesting that these are meaningful values indicating the maximum levels of polluting metals in the sediments. However, the triple acid digest with HF does sometimes give higher values (and reasonable agreement for CRM's such as MESS-1) but with poorer reproducibility.     

Synthesis, Structures, and Thermal Expansion of the La2W2−xMoxO9 Series

The La₂W_2−xMo_xO₉ series has been synthesized by the ceramic method. An alternative synthesis using microwave radiation is also reported. La₂W₂O₉ has two polymorphs and the low-temperature phase (α) transforms to the high-temperature form (β) at 1077°C. The influence of the W/Mo substitution in this phase transition has been investigated by DTA. The β structure for x≥0.7 compositions can be prepared as single phase at any cooling rate. The β phase for 0.3≤x≤0.7 compounds can be prepared as single phase by quenching, whereas a mixture of α and β phases is obtained by slow cooling. The W/Mo ratio in both coexisting phases is different with the β-phase having a higher Mo content. The x=0.1 and 0.2 compounds have been prepared as mixtures of phases. The room temperature structure of β-La₂W_1.7Mo_0.3O₉ has been analyzed by the Rietveld method in P2₁3 space group. The final R-factors were R_WP=9.0% and R_F=5.6% with a structure similar to that of β-La₂Mo₂O₉. Finally, the thermal expansion of both types of structures has been determined from a thermodiffractometric study. The thermal expansion coefficients were 2.9×10⁻⁶ and 9.7×10⁻⁶°C⁻¹ for α-La₂W₂O₉ and β-La₂W_1.2Mo_0.8O₉, respectively.     

One-step Beckmann Rearrangement from Ketones and Hydroxylamine in Dry Media under Microwave Irradiation

TheBeckInannrearrangement,theacid-mediatedisomerizationofoximestoamides,wasfirstdiscoveredinl886l.Asoneoftheoldestandmostfamiliartransformationsinorganicchemistry,ithasbeenwidelystudiedandagreatvarietyofmethodstoconductthistfansformationhavebeenreported'.However,mostofthesemethodswerecarriedoutbyusingalargeamountofsolventswithlongreactiontime.Whatismore,thepriorpreparationofthecorrespondingketoximesisusuallyrequired,whichmakestheseprocessesinconvenientandlessattractive.Bytakingadvantageofboth…     

Rapid Protein Hydrolysis by Microwave Irradiation Using Heat-Resistant Teflon-Pyrex Tubes

A rapid peptide-bond hydrolysis by means of microwave irradiation is introduced for the facile preparation of protein hydrolysates used for amino acid analysis. The optimal hydrolysis condition has been determined using several enzymes with known amino acid compositions. The effects of hydrolysis time on the recovery of various labile and hydrophobic amino acids are also exemplified in the microwave heating of standard amino acids. The method has been applied to the complete amino acid analysis with a single nonvolatile solvent of methanesulfonic acid with good recovery of tryptophan and half-cystine. It provides a radical expedition of protein and peptide hydrolysis via commercial microwave ovens and specially-designed Teflon-Pyrex tubes, circumventing the tedious procedures using vacuum-sealed pyrex lubes heating at 110°C for more than 24 h. This novel type of microwave chemistry associated with rapid peptide-bond cleavage is of great potential in the automation of the complete process of amino acid analysis starting from the preparation of protein hydrolysates.     

Beer Digestions for Metal Determination by Atomic Spectrometry and Residual Organic Matter

Many standard and official sample digestion procedures for trace metal determination are carried out in open vessels on hot plates. A new procedure for the determination of trace metals by flame atomic absorption spectrometry or inductively coupled plasmaatomic emission spectrometry in beer samples was developed to be performed in closed reactors assisted by microwaves. The results are compared with the ones obtained by other procedures by means of the analysis of the variance. The differences between the procedures are attributed to residual organic matter. Voltammetry, absorption molecular spectrophotometry and high pressure liquid chromatography with a photodiode array detector are used to study the nature of these residues. Nitrobenzoic acids, phenolic acids and other organic compounds are often present after digestion. The results obtained are related to the precision in metal determination by atomic spectrometry. The need for elaboration of certified reference materials for trace metals in beer is suggested.