同时发射和接收纵波和横波的压电复合材料换能器

通过控制压电复合材料中压电相的分布形式，本文具有在百度模振动的１－３型压电复合材料和具有扭转模振动的拼接２－２型压电复合材料组合在一起，构成一种混俣模式压电材料，并测试了这种压电材料晶片的性能参数，使用这种晶片作的换能器可以根据使用者的要求，单独产生纵波或横波，也可同时产生这两种波。     

微流量输液泵

对近几年出现的以声、光、电、磁、热等为基本激发形式的新颖的微流量输液泵的原理、特点作了评述。     

Hybrid Comminution with High‐Pressure Roller and Stirred Bead Milling

This paper presents the experimental results on the wet grinding of a moist calcium carbonate material in a hybrid comminution system, which consists of a high pressure roller mill (HPRM) and a subsequent stirred bead mill. The results show that the pre‐treatment of the material with the HPRM could result in energy saving and efficient size reduction during the subsequent wet ultra‐fine grinding in the stirred bead mill. It was found that the level of fineness of the ground product is dramatically influenced by the number of repeat passes of pre‐grinding in the HRPM. The formation of micro‐cracks in the particles under compressive loads was discussed in order to elucidate the role of the HRPM as a pre‐grinder in the hybrid comminution system. The simulated breakage behaviors of various irregular shaped particles indicate that the tortuous micro‐crack propagation paths and the crack branching behavior are related to the heterogeneity of the particle and the stress distributions.     

压电复合材料宽带横波换能器的实验研究

本文用实验方法研究了２－２压电复合材料的厚度切变特性，定性地给出了２－２压电复合材料的性能与ＰＺＴ相体积百分比，以及与共振频率牟关系。并用这种材料作为换能元件，制作出高灵敏度窄脉冲横波换能器。     

W/O型乳胶粒子表面电性的近代测试技术

采取近代表面电学测试技术对乳胶粒子表面电性进行微观测量，取得了一系列反映胶粒表面双电层结构的特征参量，证明表面扩散双电层的存在。为完善W／O型乳胶体系的稳定性理论提供了一定实验依据。     

低声阻抗复合压电陶瓷的研究及应用

本文研究了我们所配制夹心结构复合压电材料低声阻抗的特性。实验表明，夹心复合压电陶瓷材料的声阻抗，与所用陶瓷材料的种类，气孔率，孔径，样品厚度以及工艺制备过程有关。实验证明，研制特定阻抗的材料是可行的，最后，用研制的新材料成功地应用于混凝土、Ｃ／Ｃ复合材料等非金属材料的超声检测中。     

Cracking in polylactide spherulites

A polylactide of high optical purity was crystallized between 100 and 140 °C, in‐between two glass slides, and its morphology was investigated by polarizing optical microscopy, scanning electron microscopy, and atomic force microscopy, during subsequent heating and cooling cycles between ?15 °C and the crystallization temperature. It was found that dark circular rings show up on cooling on top of the spherulites and represent cracks of about 300 nm in width. This phenomenon is completely reversible, and the heating–cooling curves are centered at about 56 °C, which coincide with the T_g of polylactide. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3308–3315, 2005     

Dynamic calibration of shock overpressure transducers

Piezoelectric transducers for dynamic overpressure measurements are commonly calibrated with static or quasistatic loads and the calibration is extrapolated to frequencies up to 30% of the resonant frequency of the piezoelectric crystal. Sinusoidal pressure generators are also used for dynamic calibration up to 500 Hz in the range of 3 MPa. This paper describes a method for dynamic calibration using transient overpressures, with rise time of 2 μsec and width 40 μsec, generated by exploding wires in air. The calibration is done in the range of 600 kPa.     

A multiple function sonar rangefinder for divers

The rangefinder described here is a self-contained instrument for hand-held operation by a diver for searching, tracking, navigation and surveying applications. It has four modes: 1 — to measure range to a passive target directly to ± 1 m; 2 — to measure range to a passive target indirectly to ± 0.1 m; 3 — to measure range to a coded transponder to either ± 1 m or ± 0.1 m; 4 — to indicate the presence of multiple targets downrange where each target occurs in a selected range interval. The pulse echo principle is employed, with pulses typically 250 μs long. The carrier frequency of 300 kHz can be altered easily if required by changing the transducer array.     

一种纵扭复合换能器型超声马达的原理及实验研究

本文从纵扭振动换能器理论出发，计算了一种新的复合换能器型超声马达，并进行了实验研究，测出了其主要性能参数。