Improving microwave dielectric properties of La2.98/3Sr0.01(Mg0.5Sn0.5)O3 ceramics with CuO additive

The microwave dielectric properties of CuO-doped La_2.98/3Sr_0.01(Mg_0.5Sn_0.5)O₃ ceramics were investigated with a view to their application in microwave devices. CuO-doped La_2.98/3Sr_0.01(Mg_0.5Sn_0.5)O₃ ceramics were prepared by the conventional solid-state method. The X-ray diffraction patterns of CuO-doped La_2.98/3Sr_0.01(Mg_0.5Sn_0.5)O₃ ceramics exhibited no significant variation of phase with sintering temperature. By adding 0.75 wt.% CuO, a dielectric constant of 20.07, a quality factor (Q × f) of 63,000 GHz, and a temperature coefficient of resonant frequency τ_f (−77.0 ppm/°C) were obtained when La_2.98/3Sr_0.01(Mg_0.5Sn_0.5)O₃ ceramics were sintered at 1500 °C for 4 h.     

Dual-band frequency selective surface with quasi-elliptic bandpass response

Based on the substrate integrated waveguide technology,we present a dual-band frequency selective surface(FSS) with a quasi-elliptic bandpass response.The characteristics of the quasi-elliptic bandpass response are realized by shunting two substrate integrated waveguide cavities of different sizes,with the same slots on both sides of the metal surfaces.Four cavities of different sizes and two slots of different sizes are used to design the novel FSS.Every bandpass response with sharp sidebands is induced by two transmission nulls that are generated by the coupling between the slot aperture resonance and the cavity resonance.The simulation results show that such dual-band FSS has the advantages of high selectivity and stable performance at different oblique incident angles.Moreover,it is easy to fabricate.     

Properties and characteristics of P(VDF/TrFE) transducers manufactured by a solution casting method for use in the MHz-range ultrasound in air

Highly effective piezoelectric polymer transducers operating in air at high frequencies have been successfully made by casting a solution of ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) P(VDF/TrFE) directly on a backing metal plate, and their performance has been evaluated. By utilizing this method, it has been possible to develop the three kinds of transducers that operate respectively at 4, 6 and 10 MHz in air. For precise evaluation of the performance of the P(VDF/TrFE) transducers, the absorption loss in air was measured up to 10 MHz. It was confirmed that the empirical formula obtained from the measured absorption values in air at high frequencies was in alignment with its theoretical value. In addition, a high lateral resolution acoustic image of a ROM-Chip (amplitude-image) at 6 MHz in air was successfully displayed using an air coupled concave type P(VDF/TrFE) transducer by bonding an epoxy adhesive.     

高斯光束在偏硼酸钡单晶和孪晶中的倍频现象

理论探讨了高斯光束在非线性单轴晶体中的倍频效应。基于麦克斯韦方程组并考虑晶体的各向异性推导出负单轴I型晶体相位匹配下的倍频耦合波方程组。建立了具体的关于偏硼酸钡（BBO）单晶以及孪晶的物理模型并做数值求解。对求解所得到的单晶以及孪晶的谐波能流分布、晶体出射面探测点处谐波电场时域分布、总输出能量、输出光束频谱和输入光束角谱分别进行分析讨论,从束腰宽度、晶体结构以及材料性质对倍频的影响等方面做出具体合理的解释。研究结果对于单轴晶体的非线性光学性质的研究以及相应的光学晶体器件的研发等具有一定的参考价值。     

神光Ⅱ终端光学组件的频率变换逆问题研究

在激光惯性约束核聚变(ICF)精确打靶中,对激光束变换、整形和控制要求苛刻,通过数字在线操控技术能够在线实现激光系统的自动校准,而频率变换是数字在线操控技术中的关键一环。在不进行逼近迭代计算的情况下,基于可逆的傅里叶变换和龙格-库塔算法,对神光II终端靶场系统中负单轴晶体KDP的"I+II"类频率变换的逆问题进行了探讨和相应的算法研究,并给出了对应的模拟计算结果。最后,与神光装置运行的实验数据进行比对,验证了频率变换逆问题算法的正确性和稳定性。     

双带频率选择表面设计

为了实现频率选择表面(FSS)的双带特性,设计了由矩形栅格和三圆环组合单元FSS。对FSS的谱域求解方法进行了详细的描述。采用谱域法分析了不同角度和极化入射波下FSS的频率响应性能。结果表明,所设计的FSS对于不同入射角度和极化电磁波具有稳定的双带、平顶传输及陡峭下降边缘特性。双带特性大致表现为1.8～5.4GHz的阻带和5.4～20.0GHz的通带。阻带谐振频率稳定在3.1GHz左右,而通带在-4dB的平顶传输带宽达14.3GHz以上。其陡峭下降边缘特性表现为S波段信号强烈反射,而其他波段信号通过,从而实现多波段通讯。该结构FSS可应用于卫星通信、雷达罩及其他相关领域。     

100Hz级脉冲管制冷机整机特性研究

脉冲管制冷机在更高频率下操作有利于系统体积的减小,同时也提高了能量的密度。本文首先介绍了直线压缩机驱动直线型脉冲管制冷机的整机计算模型,对于惯性管进行了湍流修正后的阻抗相位分析,结果表明频率越高,湍流影响越小。在100Hz下,整机取得了12．4W的制冷量,冷头温度到达31．8K,整机相对卡诺效率18．4％,已经十分接近...     

N2��Ƶ�ŵ��������(e,N2+, N+)��PIC-MCģ��

采用PIC-MC自洽模型,模拟了氮气电容性耦合射频放电的微观等离子体过程及带电粒子(e,N2+,N+)的行为。结果表明,离子(N2+,N+)的运动状态滞后瞬时射频电场的变化;在两极附近,N2+具较高密度,但能量较低,N+具较低的密度但能量较高,两者的密度差6倍左右。两种离子轰击射频电极的能量分布变化规律类似,随放电参数变化,离子(N2+,N+)能量变化显著,其密度变化不明显。模拟的电子能量几率分布与测量结果一致。     

Magnetic field dependence of piezoelectric resonance frequency in CoFe2O4–BaTiO3 composites

The particulate and the multilayer CoFe₂O₄(CFO)–BaTiO₃(BT) composites were prepared by the conventional solid state reaction method and the tape casting method, respectively. Both the prepared composites were simultaneously ferroelectric and ferromagnetic at room temperature. For the multilayer composite sample, a piezoelectric resonance frequency remarkably depended on the applied DC magnetic field, while no remarkable magnetic field dependence was observed for the particulate composite samples. An uniform magnetostriction of the CFO phase in the multilayer composite contributes to piezoelectric effect of the BT phases, resulting in the modulation of the piezoelectric resonance frequency.