金负载量对低温水煤气变换Au/α-Fe2O3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au/α-Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件，考察了金负载量对催化剂性能的影响。采用BET、XRD、UV-VIS、XRF、H2-TPR和O2-TPO等表征手段对催化剂的结构进行分析，并与其催化性能进行关联。结果表明，（1）采用10%-H2/N2还原气将催化剂在150 ℃原位还原9 h，其催化活性最高；（2）金的最佳负载量为8.00%，此时在催化剂制备过程中金的流失量较少，金粒子较小，也有利于抑制催化剂在反应过程中烧结；（3）TPR-TPO结果表明，金的负载量为8.00%时，Au/α-Fe2O3催化剂具有较易被还原、不易被氧化的性质，从而显示出最高催化活性。（4）Au/α-Fe2O3催化剂中的金以单质金（Au0）形式存在；其高活性与Au0-Fe3O4间的协同作用有关。     

HIPS／PP熔融反应共混及其动态力学性质

研究了高抗冲聚苯乙烯（HIPS）／聚丙烯（PP）共混物在过氧化二异丙苯（DCP）存在下的熔融反应过程及其动态力学性质．HIPS在DCP存在下以聚苯乙烯（PS）的降解为主，伴随着聚丁二烯（PB）的交联和接枝，PP在DCP存在下以降解为主，HIPS／PP在DCP存在下以PP同HIPS的反应接枝为主，这种原位生成的增容剂显著地改善了HIPS／PP两组份间的相容性，其分子运动特征较前两者发生明显变化，PS的Tg下降，PB和PP的Tg升高．     

Electron impact induced fragmentation of aromatic N-alkoxy-imines I. Ring closure in (M-CH2O)+• ions by intramolecular aromatic substitution

Summary N-Butoxy- and N-propoxy-imines derived fromo-,m-, andp-substituted benzaldehydes (X = F, Cl, Br, I) decompose upon electron impact to the respective aldoximes by loss of C _n H_2n and competitivelyvia 1,5-distonic radical cations by loss of CH₂O to 1,3-distonic ions which eliminate H and/or a halogen atom in the course of homolytic aromatic substitution, giving rise to cyclic (M-CH₂O-H)⁺ or (M-CH₂O-X )⁺ ions.Dedicated with warm regards to Prof. Dr.D. Seebach, Zürich, on the occasion of his 60^th birthday     

Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method北大核心CSCD

Aimed at the internal short circuit problem due to large deformation of the prismatic lithium-ion battery cell under impact loadings, a simplified battery model was first established. Then the motion equations of velocity and displacement based on the membrane factor method were proposed. With the effects of the face-sheet thickness and the densification region on the normalized final deflection, impact response characteristics of prismatic battery cells were investigated in detail. The results show that, the improved motion equations involving the membrane factor can reflect the dynamic response mechanisms of the prismatic battery cell under impact loadings, and the large deflection under high-speed impact can be predicted. With the increase of the face-sheet thickness, the deflection of the battery cell’s lower part decreases obviously. However, the densification region expands with the face-sheet thickness. The deflection and the densification region of the cell’s lower part both increase with the inner core density of the battery. This proposed impact model provides a theoretical guidance for the multi-functional integrated dynamic design of prismatic battery cells. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

气候对安徽中药材产业经济影响分析——基于经济气候模型

通过考虑气候和经济社会因素,将气候因素与函数综合考虑并进行分析,构建“经济气候”模型,分析并得出气候因素对安徽省中药材产业影响程度,利用所构建BP神经网络模型,分析数据,对气象因素对中药材产业的影响结果进行预测。通过分析安徽省气候变化的特点与方向,确定气候因素对中药材产业的影响程度,为中药材产业发展提供一定的数据分析支撑,为有针对性的管理中药材产业提供方法与数据基础,同时对降低严重气象灾害对中药材生产带来的负面作用具有一定的理论与实践意义。     

带时间窗的三维装载物流配送优化方法研究

针对城市物流配送优化研究在客户服务时间窗和货物装载方式合理结合方面存在的不足,考虑物流配送车厢货物装载方式与客户访问序列相关的特征对车厢空间进行合理的区域划分。首先,构建了包含配送中心的固定成本、配送车辆的运输成本、维修成本、租赁成本和违反时间窗惩罚成本的物流运营成本最小化和配送车辆空间利用率最大化的双目标优化模型;然后,提出一种结合遗传算法(GA)全局搜索能力和禁忌搜索算法(TS)局部搜索能力的GA-TS混合算法求解模型;最后,结合重庆市某配送中心的三维装载物流配送实例数据进行了优化计算,实验结果给出了带时间窗的三维装载物流配送路径优化方案,并进行了不同车厢空间分区模式下平均装载率、物流运营成本和车辆使用数的比较分析。研究表明,当客户需求货物种类数与车辆的空间区域划分数相等且按货物类型进行区域划分时,物流运营成本最小,配送车辆使用数最少和车辆平均装载率最高。     

A predictive model for impact response of viscoelastic polymers in drop tests

We show for the first time that a classical Hookean viscoelastic constitutive law for rubbery materials can predict the impact forces and deflections measured with a commercial drop tester when a mass, or tup with a flat impacting surface is dropped onto a flat pad of commercial impact-absorbing rubber. The viscoelastic properties of the rubber, namely the relaxation times and strengths, are obtained by a standard rheological linear-oscillatory test, and the equation of momentum transfer is then solved, using these measured parameters, assuming a uniaxial deflection of the pad during the impact. Good agreement between measured and predicted forces and deflections is obtained for a series of various drop heights, tup masses, impact areas, and pad thicknesses, as long as the deflection of the pad relative to its thickness is small or modest (<50% or so), and as long as the area of the pad is less than or equal to that of the tup. When the pad area is greater than the tup, forces are higher than predicted, unless an empirical factor is introduced to account for the nonuniaxial stretching of the ring of material that extends outside of the impact area. These results imply that the impact-absorbing properties of a rubbery polymeric material can be assessed by simply examining the material's linear viscoelastic spectrum.     

N,N′-双-(2-羟基苯亚甲基)-烷基(芳基)甲二胺类化合物质谱研究

本文对双Schiff碱类化合物的质谱进行了研究,由于其结构的特殊性,质谱的裂解过程中出现一些特殊的碎片离子,它包括羟基氢的迁移、双键的转换以及分子结构重排等,为研究这类化合物的结构和性质提供了重要的信息。     

α－甲基苯乙烯对HIPS／SBS共混物流变行为及力学性能的影响

用锥板式流变仪研究了α－ＭＳ对ＨＩＰＳ／ＳＢＳ共混物流动行为的影响，结果表明：不同α－ＭＳ用量的共混物和如曲线相似．均随增加τ＿ｗ增大、η＿ａ下降。流动指数，ｎ均小于１为非牛顿假塑性流体。加入少量（约２．５％）α－ＭＳ使共混物熔融指数提高３倍，其总体力学性能变化不大。     

稀土离子(Gd3+,Eu3+)加载于纳米介孔ZrO2中的发光

水热合成法制备的高度有序多孔ZrO2具有规则六角排列，均匀纳米孔洞（约1．8nm)，丰富的表面，界面态及比表面积和强的蓝－（近）紫外光发射，使其较常规体材料有更优异的性质，以稀土离子为探针，研究了Gd^3 ,Eu^3 在这些纳米微孔中的发光行为，结果表明，500摄氏度下，介孔ZrO2与稀土离子相作用并有效地将能量传递给稀土离子，增进稀土离子发光，而在ZrO2:Gd-Eu体系中，Gd^3 在ZrO2与Eu3 间起桥梁作用，使基质ZrO2→Eu^3 的能量传递更为有效。