Surface area of papermaking woodpulps used by the British paper industry

The surface area was determined for various papermaking woodpulps: bleached eucalyptus globulus sulphate pulp; bleached eucalyptus grandis sulphate pulp; bleached betula verrucosa sulphate pulp; bleached pine/spruce sulphate pulp; bleached pine/spruce sulphate pulp fines. The method of negative adsorption was used which gives an effective wet surface area. By looking at negative adsorption data more closely, some inference can be made about the morphology of the substrate.Glossary of symbols B (e²/2kT)^1/2 - ¯C concentration of fibre per unit volume of pulp - 1 - ¯¯c - h angle between pore and the axis of the bed in a permeable material - K permeability coefficient - k Boltzmann constant - k ₀ shape factor for pores in a permeable material - n _i concentration of co-ion in the bulk solution - n _i experimentally observed increase in concentration of co-ion in the bulk solution - S surface area - S _t wS - S ₀ surface area per unit volume of permeable material - V _t total volume of solution - V excluded volume - V _s excluded volume accessible to water but not to ions - V _obs experimentally observed excluded volume - w weight of dry fibre - ¯ effective volume of fibres in a permeable pad - surface potential at outer Helmholtz plane     

Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

The impregnation of magnetite (Mt) nanoparticle (NPs) onto Musa acuminata peel (MApe), to form a novel magnetic combo (MApe-Mt) for the adsorption of anionic bromophenol blue (BPB) was studied. The SEM, EDX, BET, XRD, FTIR and TGA were used to characterize the adsorbents. The FTIR showed that the OH and CO groups were the major sites for BPB uptake onto the adsorbent materials. The average Mt crystalline size on MApe-Mt was 21.13 nm. SEM analysis revealed that Mt NPs were agglomerated on the surface of the MApe biosorbent, with an average Mt diameter of 25.97 nm. After Mt impregnation, a decrease in BET surface area (14.89 to 3.80 m²/g) and an increase in pore diameter (2.25–3.11 nm), pore volume (0.0052–0.01418 cm³/g) and pH point of zero charge (6.4–7.2) was obtained. The presence of Pb(II) ions in solution significantly decreased the uptake of BPB onto both MApe (66.1–43.8%) and MApe-Mt (80.3–59.1%), compared to other competing ions (Zn(II), Cd(II), Ni(II)) in the solution. Isotherm modeling showed that the Freundlich model best fitted the adsorption data (R² > 0.994 and SSE < 0.0013). In addition, maximum monolayer uptake was enhanced from 6.04 to 8.12 mg/g after Mt impregnation. Kinetics were well described by the pseudo-first order and liquid film diffusion models. Thermodynamics revealed a physical, endothermic adsorption of BPB onto the adsorbents, with ΔH^o values of 15.87–16.49 kJ/mol, corroborated by high desorption (over 90%) of BPB from the loaded materials. The viability of the prepared adsorbents was also revealed in its reusability for BPB uptake.     

神光-Ⅱ装置三倍频实验中靶场单元技术的改进

 主要介绍为了满足神光-Ⅱ高功率激光装置三倍频光（351nm，3ω）的物理实验要求，靶场三倍频模拟光源和瞄准监视系统两个主要单元技术的改进，即三倍频模拟光源由基频光（1 053nm，3ω）通过腔外的KTP+BBO晶体倍频获得，再经八路分光系统和主激光耦合；瞄准监视系统由透射式光学系统改进为反射式光学系统，避免原系统存在较大的色差，提高瞄准精度。     

Effect of bovine serum albumin on the surface properties of ionic liquid-type Gemini surfactant

The effect of bovine serum albumin on the surface properties of IL-type gemini surfactant ([C₁₀-4-C₁₀im]Br₂), have been investigated by surface tension method. The critical micelle concentration (CMC) as a function of BSA concentrations at various temperatures was investigated. The CMC of [C₁₀-4-C₁₀im]Br₂ increases with increasing the concentration of BSA as well as the temperature of the system. The interfacial parameters viz; maximum surface excess concentration (Γ_max), the minimum area per molecule (A_min), and surface pressure at CMC (Π_cmc) were calculated. In addition, thermodynamic parameters of adsorption and micellization were evaluated by using surface tension data. The results indicated that the binding of [C₁₀-4-C₁₀im]Br₂ to BSA is spontaneous and exothermic in nature. The process is entropy driven and hydrophobic interactions are the major driving forces.     

A relaxation times coupling method to construct acoustic relaxation calibration for two-frequency measuring gas compositions

In our previous work (Hu et al., 2014), a method has been proposed to detect gas compositions by locating the acoustic spectral peaks, which can be detected only by two-frequency acoustic measurements in practice. However, as a ‘Detection Calibration’, the effective relaxation area (ERA) constructed by existing theoretical model cannot match the two-frequency measurements when there are more than one strong relaxational components in gas mixtures. This paper proposes a method to construct the ERA by coupling the decoupled single relaxation times together to a whole relaxation time. For gas mixtures with only one single relaxation process, the predicted ERA results match with the experimental data better than those predicted by the existing model. Moreover, for gas mixtures in which more than one relaxation process are significant, the ERA results predicted by the proposed method also match with the detection results of two-frequency measurements better than the existing model. This relaxation time coupling based ERA constructing method is validated by the application in low-quality natural gas detection.     

Intra-abdominal fat area is a predictor for new onset of individual components of metabolic syndrome: MEtabolic syndRome and abdominaL ObesiTy (MERLOT study)

Objective: To investigate the significance of intra-abdominal fat area (IAFA) on new onset of individual components of the metabolic syndrome: high blood pressure, dyslipidemia, or hyperglycemia. Methods: We conducted a longitudinal study using checkup data of a hospital from 1994 to 2010. Of 25,255 subjects, we examined 1,380 Japanese, who underwent computed tomography to measure IAFA and had no metabolic syndrome components at baseline. Results: During 3.6 years of the mean follow-up period, one of metabolic syndrome components occurred in 752 subjects. Of three components, high blood pressure was more prevalent. The multiple Cox regression analysis disclosed that IAFA is significantly associated with onset of metabolic syndrome components (HR: 1.05 per 10 cm², 95%CI: 1.03–1.07). This finding was independent of BMI, and significant even in non-obese individuals with body mass index <25 kg/m². Conclusions: MERLOT study demonstrates that IAFA is an independent predictor for new onset of individual components of the metabolic syndrome, even in non-obese healthy Japanese.     

Relation between structure and enthalpy for stacking interactions of aromatic molecules

An approximately linear correlation has been found between the enthalpy of complexation and the area of overlap of the chromophores using published structural and thermodynamical data on the self- and hetero-association of aromatic molecules measured under similar solution conditions. This finding is consistent with the assumption that short-range van-der-Waals forces dominate over other contributions to the enthalpy of stacking of aromatic molecules. It provides a ‘model-independent’ approach for a priori estimation of the enthalpy of aromatic–aromatic stacking interactions from knowledge of the structural properties or vice versa.     

反导火力单元空间杀伤区内拦截概率研究

拦截概率是评价反导作战效能的重要指标,对交战前任务规划至关重要。选取某一拦截弹建立其在空间的可达集区域,针对中段反导逆轨拦截情况,确立其在空间中的杀伤区。针对杀伤区内任一点可能为拦截点的情况,对某一来袭导弹的弹道轨迹,选取可拦截弧段上的理论拦截点,通过在选取不同高度上的理论拦截点上,调整拦截弹的发射位置,从而得到拦截点在杀伤区内不同高度,不同距离以及在不同的交汇角时对拦截概率的影响。为反导作战的阵地部署研究和交战策略提供了一定的参考。     

An analysis of peak overpressures in vented gaseous explosions

Experimental data from vented explosion tests using stoichiometric methane–air and 18% hydrogen–air mixtures in a 63.7 m³ chamber with a 2.7 or 5.4 m² vent are presented. Results from experiments conducted using stoichiometric propane–air in 2.42 m³ vessel with a 0.26 m² vent are also reported. The tests were focused on the effect of fuel, enclosure size, ignition location, vent size, and obstacles on the pressure development of a propagating flame in a vented enclosure. The dependence of the maximum pressure generated on the experimental parameters was analyzed. It was found that the pressure maxima may be caused by pressure transients controlled by the interplay of the maximum-flame area, the burning velocity, and the overpressure generated by an external explosion. A simple model was proposed to estimate the maximum pressure for each of the main pressure transients. The model was found to agree with the experimental data within the experimental uncertainty.