基于图论和遗传算法的终端扇区划分方法

为了均衡终端区扇区的工作负荷,保障扇区边界的合理性,研究了终端扇区的划分方法.针对建立的扇区划分数学模型,提出了3阶段的划分方法.首先,采用voronoi图和遗传算法完成初始划分,实现均衡负荷的目标;其次,提出了基于voronoi图和基于maklink图的2种扇区二次划分方法,满足最小飞行时间及最小距离约束;最后,应用分段线性拟合的方法消除扇区边界的锯齿状,以及满足扇区凸形约束.以广州终端为例进行了仿真计算.应用提出的方法,给出了2种划分结果,都能够使得各扇区的工作负荷在2880s以内,差值不超过350s,扇区边界较为平滑,且计算时间明显减少.仿真计算结果说明方法是可行和有效的,也为使用者提供了灵活的选择.     

改性松香键合二氧化硅高效液相色谱固定相的制备及其对三七总皂苷的分离

三七中发挥药效的主要成分为三七皂苷R1、人参皂苷Rg1、人参皂苷Re、人参皂苷Rb1和人参皂苷Rd,用于贫血、冠心病、高血压、脑卒中后遗症等疾病的治疗,但其化学成分多且难分离.将氢化松香丙烯酸羟乙酯(HRHA)通过巯基-烯点击化学反应键合到烷基化硅胶表面,制备出一种新型的改性松香键合二氧化硅高效液相色谱固定相(SiO2...     

残余奥氏体含量对马氏体高强钢滑动磨损性能的影响

对3种不同残奥(RA)含量的马氏体高强钢进行干滑动摩擦磨损试验, 研究RA含量对其磨损性能的影响. 利用扫描电镜、透射电镜、X射线衍射仪等对试验后的磨损表面及横截面显微组织进行表征. 结果表明, RA含量越高, 磨损表面越光滑, 摩擦系数和磨损率越小, 也即马氏体高强钢的耐磨性越好. 磨损引起的大应变使RA发生应变诱导马氏体相变, 导致硬度和硬化层厚度显著增大. RA含量最高的HT3试样的硬度提高了18.3%, 硬化层厚度达70μm. 相比RA含量低的试样, HT3试样表现出很好的耐磨性. 这是因为马氏体相变使硬度逐步增加, 抗裂纹萌生能力提高; 同时由于亚表面良好的韧性, 可延缓和阻止裂纹扩展, 使得点蚀和剥落不易形成. 因此, 要提高马氏体高强钢的耐磨性, 除了硬度要求外, 还需要考虑其亚表面韧性.     

近似函数高阶导数的高精度积分逼近方法

主要研究稳定计算近似函数的高阶导数的积分逼近方法,方法因由Lanczos提出故也称为Lanczos算法.利用Legendre多项式的正交性,提出了一类逼近近似函数高阶导数的高精度积分方法,即构造出一系列积分算子Dn,h(m)去逼近噪声函数的高阶导数,且这些积分算子具有O(δ(2n+2)/(2n+m+2))的收敛速度,其中δ为近似函数的噪声水平.数值模拟结果表明提出的方法是稳定而有效的.     

Growth of EuTe islands on SnTe by molecular beam epitaxy

Semiconductor magnetic quantum dots are very promising structures, with novel properties that find multiple applications in spintronic devices. EuTe is a wide gap semiconductor with NaCl structure, and strong magnetic moments S=7/2 at the half filled 4f⁷ electronic levels. On the other hand, SnTe is a narrow gap semiconductor with the same crystal structure and 4% lattice mismatch with EuTe. In this work, we investigate the molecular beam epitaxial growth of EuTe on SnTe after the critical thickness for island formation is surpassed, as a previous step to the growth of organized magnetic quantum dots. The topology and strain state of EuTe islands were studied as a function of growth temperature and EuTe nominal layer thickness. Reflection high energy electron diffraction (RHEED) was used in-situ to monitor surface morphology and strain state. RHEED results were complemented and enriched with atomic force microscopy and grazing incidence X-ray diffraction measurements made at the XRD2 beamline of the Brazilian Synchrotron. EuTe islands of increasing height and diameter are obtained when the EuTe nominal thickness increases, with higher aspect ratio for the islands grown at lower temperatures. As the islands grow, a relaxation toward the EuTe bulk lattice parameter was observed. The relaxation process was partially reverted by the growth of the SnTe cap layer, vital to protect the EuTe islands from oxidation. A simple model is outlined to describe the distortions caused by the EuTe islands on the SnTe buffer and cap layers. The SnTe cap layers formed interesting plateau structures with easily controlled wall height, that could find applications as a template for future nanostructures growth.     

Low temperature,high pressure Raman study of SbSBr

Abstract

We have measured the Raman spectra of the quasi-one-dimensional crystal SbSBr as a function of pressure at 295, 70, 37 and 25 K.

The pressure coefficients of the observed Raman modes have been determined and used to distinguish inter-from intrachain modes. Spectral features characteristic of the ferroelectric phase have been attributed to impurities or lattice imperfections and not to the presence of the ferroelectric phase, providing indication that the para-to ferroelectric phase transition occurs below 25 K.     

Emittance measurement & optimization for the photocathode RF gun with laser profile shaping

The Laser Undulator Compact X-ray source(LUCX) is a test bench for a compact high brightness X-ray generator,based on inverse Compton Scattering at KEK,which requires high intensity multi-bunch trains with low transverse emittance.A photocathode RF gun with emittance compensation solenoid is used as an electron source.Much endeavor has been made to increase the beam intensity in the multi-bunch trains.The cavity of the RF gun is tuned into an unbalanced field in order to reduce space charge effects,so that the field gradient on the cathode surface is relatively higher when the forward RF power into gun cavity is not high enough.A laser profile shaper is employed to convert the driving laser profile from Gaussian into uniform.In this research we seek to find the optimized operational conditions for the decrease of the transverse emittance.With the uniform driving laser and the unbalanced RF gun,the RMS transverse emittance of a 1 nC bunch has been improved effectively from 5.46 πmm.mrad to 3.66 πmm.mrad.     

An optical fiber sensor based on cladding photoluminescence for high power microwave plasma ultraviolet lamps used in water treatment

Low-pressure mercury lamps are commonly used for germicidal applications such as water and wastewater sterilisation. The germicidal effect is due to the emission of light at 254 nm, which leads to the destruction of most waterborne bacteria. The Microwave plasma ultraviolet lamp (MPUVL) is a new technology for generating a high intensity ultraviolet (UV) light. A Fluorescent optical fiber based sensor is presented which is used for monitoring the output of a high power microwave UV light source and its control. This sensor is a fiber which has had its cladding removed and been coated with a phosphor doped polymer. This paper was originally presented at the 2001 International Conference (2nd Joint OSJ-SPIE Conference) on Optical Engineering for Sensing and Nanotechnology, ICOSN 2001 which was held June 6–8, 2001 at the Pacifico-Yokohama Conference Center, Yokohama, Japan.     

Mössbauer Investigation of the Itinerant Magnets U(Ga0.98Sn0.02)3 and CeFe2

The theoretical predictions that UGa₃ and CeFe₂ should be regarded as itinerant magnets stimulated new investigations. In this paper we focus on Mössbauer measurements aimed to characterize their magnetic properties. We show that the analysis of the transferred hyperfine interactions at the ¹¹⁹Sn nuclei in U(Ga_0.98Sn_0.02)₃, a type II antiferromagnet, provides direct information on the f-p hybridization and allows to determine the orientation of the U moments. The study of CeFe₂ demonstrates that the intrinsic ferromagnetism coexists with short range antiferromagnetic correlations. The instability of the ferromagnetic state is illustrated by doping CeFe₂ with a small amount of Co and by application of pressure on pure CeFe₂. Our results will be discussed in connection with neutron and synchrotron experiments.