AFM电化学阳极氧化制备二氧化钛纳米线

当材料的微观尺度进入纳米量级后，由于量子效应，材料常常会显现出特殊的性能。因此近年来制备量子点、量子线，以及具有量子效应的量子器件受到深入的研究。一些新的纳米尺度加工技术如原子力显微镜(AFM)微细加工技术受到研究者的重视。     

Probing in vitro digestion at oil–water interfaces

Interfacial layers have been widely applied to study the formation and stability of emulsion-based systems. However, the application of isolated interfaces to address digestibility of emulsions is often limited because of the complexity of experimental methods and results. This review summarizes the latest developments in analytical methods and literature data on effects of digestion on interfacial layers. Particular emphasis is given to understand the changes on interfacial magnitudes during oral, gastric, and duodenal digestion, either applied separately or sequentially. Limitations of interfacial aspects and key factors that influence emulsion microstructure in bulk and lipid digestion are identified. Understanding the behavior of interfacial layers upon gastrointestinal digestion promotes an accurate tracking of the physiological fate of emulsions.     

Scaling Function Between the Exponential-6 and the Generalized Lennard-Jones Potential Functions

The van der Waals forces for non-bonded interaction can be expressed either by the Exponential-6 or by the Lennard-Jones(m-n) potential functions, whereby m > n. Hitherto a relationship exists between the Exponential-6 and the Lennard-Jones(12-6) potential functions, with a scaling factor = 13.772 at or near the equilibrium and = 12.0 for long range interaction. This paper attempts to develop relationships between Exponential-6 and a more generalized Lennard-Jones(m-n). Analysis reveals that the relationship exists only when n = 6 and that two sets of scaling factors (as functions of index m) applies for the relationship between Exponential-6 and the Lennard-Jones(m-6), whereby m > 6.     

Conformation and internal mobility of 5H-dibenzo[a,d]cycloheptene derivatives in solution. Conformational analysis of highly flexible structures,part II

Summary The conformational possibilities of 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cycloheptene (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (2), and 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cycloheptene (3) are analysed using empirical force field methods. Minimum energy conformations, interconversion pathways, interconversion graphs and interconversion energies are examined in view of the analysis of conformer equilibria of1,2, or3 in solution. In addition, some basic requirements of the analysis of fast interconverting conformers using the lanthanide induced shift method are discussed.

---

Konformation und interne Beweglichkeit von 5H-Dibenzo[a,d]cyclohepten Derivaten in Lösung. Konformationsanalyse hochflexibler Strukturen, Teil 2

Zusammenfassung Die konformativen Möglichkeiten von 5-(3-N,N-dimethylaminopropyl)-5H-dibenzo[a,d]cyclohepten (1), 5-(3-N,N-dimethylaminopropylidene)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (2) und 5-(3-N,N-dimethylaminopropyl)-10,11-dihydro-5H-dibenzo[a,d]cyclohepten (3) wurden mit Hilfe empirischer Kraftfeldmethoden analysiert. Jene Konformationen, die einem energetischen Minimum entsprechen, sowie Interkonversionswege, Interkonversionsgraphen und Interkonversionsenergien wurden in Hinblick auf die Analyse der Konformerengleichgewichte von1,2 oder3 in Lösung untersucht. Weiters werden noch einige grundlegende Voraussetzungen für die Analyse von sich schnell ineinander umwandelnden Konformeren mittels der Lanthaniden-induzierten Verschiebungsmethode besprochen.

     

原子力显微镜针尖诱导聚氧乙烯熔体结晶的研究

原子力显微镜(AFM)是研究高分子结晶行为的一种重要实验手段.在使用AFM原位观察高分子结晶时,为保证能真实地反映结晶过程,一个必须注意的问题是要避免AFM针尖的影响.与此同时,人们考察了在AFM扫描时针尖诱导高分子结晶成核的情况.若使用AFM接触模式(contactmode),扫描时容易造     

利用AFM和SNOM对淋巴细胞膜表面超微结构及其光学性质的初步研究

利用原子力显微镜(Atomic Force Microscopy，AFM)对淋巴细胞表面形貌进行了形态学的初步研究，观察到了其膜表面其他显微技术所不能发现的超微结构．同时也运用扫描近场光学显微镜(Scanning Near field Optical Microscopy，SNOM)对淋巴细胞进行成像，观察了其对光的透射、吸收等光学性质，并对两种成像方法进行了比较．研究发现：淋巴细胞膜表面凹凸不平，分布着大量直径几十到几百纳米不等的小颗粒；淋巴细胞中央部位有自发荧光现象．结果表明，AFM和SNOM可作为进一步探讨淋巴细胞的结构与功能关系的有力工具．     

New perylene polyimides containing p‐n diblocks for sensitization in TiO2 solar cells

Three novel perylene polyimides (PPIs) containing p‐n diblock units were designed and synthesized for use in dye‐sensitized mesoporous TiO₂ solar cells. They all dissolve in m‐cresol and N‐methyl‐2‐pyrrolidone (NMP). Their visible light absorption, electrochemical and photoelectrochemical properties were systematically studied. The polyimides have band gap energies of 2.16, 2.19 and 2.25 eV deduced from ultraviolet–visible absorption spectra, and electron affinity (E_a) and ionization potential (IP) of ?3.93 and 6.10 eV for PPI1, ?3.94 and 6.13 eV for PPI2, ?3.93 and 6.59 eV for PPI3, respectively, deduced from cyclic voltammogram. Experimental data show that introduction of 4,4′‐bisaminetriphenylamine cannot only greatly enhance optic‐electro conversion efficiency, but also enhance the dissolubility which in favorable for making the devices. The relationship of structure and properties of PPI is discussed and the mechanism of photocurrent generation is explained. Copyright © 2004 John Wiley & Sons, Ltd.     

Phipps's lagrangian and hamiltonian

In this work it is derived Phipps's Lagrangian function and Phipps's Hamiltonian function. This allows the utilization of Phipps's interaction in the Lagrangian and Hamiltonian frameworks.Dedicated to Thomas E. Phipps, Jr. on the occasion of his 70th birthday (1995).     

The difference between Newtonian and relativistic forces

This paper discusses a new turn in the 148-year old electrodynamic force law controversy between the 1822 Ampère force law of the Newtonian electrodynamics and Grassmann's 1845 law which has become the electrodynamic force law of relativistic electromagnetism. Faced with the infallibility of Ampère's empirical law, defenders of relativity theory now argue that Ampère's law is equivalent to the relativistic law. This paper demonstrates that, far from being equivalent, the laws require two different mechanics of solid bodies, disagree on internally generated stresses, and predict different force distributions.     

RECENT PROGRESS OF NANO-MECHANICAL MAPPING

 Nano-mechanical mapping by atomic force microscopy has been developed as an useful application to measure mechanical properties of soft materials at nanometer scale. To date, the Hertzian theory was used for analyzing force-distance curves as the simplest model among several contact mechanics between elastic bodies. However, the preexisting methods based on this theory do not consider the adhesive interaction in principle, which cannot be neglected in the ambient condition. A new analytical method was introduced to estimate the elasticity and the adhesive energy simultaneously by means of the JKR theory, describing adhesive contact between elastic materials. Poly(dimethylsiloxane) (PDMS) and isobutylene-co-isoprene rubber (IIR) were analyzed to verify the applicable limit of the JKR analysis. For elastic samples such as PDMS, the force-deformation plots obtained experimentally were consistent with JKR theoretical curves. Meanwhile, for viscoelastic samples, especially for IIR, the experimental plots revealed large deviations from JKR curves depending on scanning velocity and maximum loading force. Some nano-rheological arguments were employed based on the difference between these specimens.