自组装单层膜的制备与应用

本文综述了自组装单层膜制备及应用技术的最新发展,分别对有机硅烷/羟基化表面和硫醇/金两种重要的自组装单层膜体系的制备新技术以及在制膜技术和分子电子学等领域的最新应用进行了总结.     

铜卟啉-L-半胱氨酸自组装复合膜修饰电极的制备及电化学性能研究

利用电化学扫描法在L 半胱氨酸(Cys)自组装单分子膜修饰金电极表面现场制备了金属卟啉复合膜,对其进行SEM和ATR FTIR表征。修饰电极的支持电解质以及pH值对膜的稳定性和灵敏度有很大影响。铜卟啉 L Cys膜对H2O2具有良好的电催化还原特性,催化电流与H2O2浓度在1 0×10 6到3 0×10 5mol·L 1范围内线性关系,相关系数0 9995,检测限达1 0×10 7mol·L 1。     

钒离子掺杂对TiO2光催化剂薄膜催化活性的影响

采用溶胶凝胶工艺在普通玻璃表面制备了钒离子非均匀掺杂的TiO2薄膜,运用XRD研究了其光催化复合薄膜的表面特征.以光催化降解甲基橙溶液为模型反应,表征薄膜的光催化活性,结果表明,将钒离子富集在TiO2薄膜内部时,最佳掺杂浓度为1.0%(V/Ti原子百分比),最佳降解表观速率常数为7.44×10-3min-1,约是纯TiO2的2.3倍,有效地提高了TiO2半导体的光催化效率.通过XPS与电化学方法进行分析,说明将钒离子富集在TiO2薄膜内部十分有利于电子-空穴的分离,增强了光生电子与空穴的分离效率.     

新型无机/有机复合柱撑粘土材料的合成与表征

以无机TiCl4／HCl制成的钛基柱撑液和十六烷基三甲基溴化胺(CTAB)为有机改性液,通过控制两种柱撑液的加入顺序以及相对含量,利用蒙脱石粘土矿物层间域的特殊化学反应场所的特性,合成得到三类复合柱撑蒙脱石材料．X射线衍射结果表明,d001晶面由于CTAB与钛基水合离子的相互作用形成粒度不同的柱撑空间而表现为两个峰值．与FT-IR光谱相比,FT-Raman光谱能够更加有效地表征和鉴定复合柱撑粘土的结构差别．采用原土无机柱撑后再有机柱撑,可以合成层间距更大的复合柱撑粘土材料．经热处理后得到锐钛型氧化钛的改性粘土材料,并且可以重新合成得到无机／有机复合柱撑的新型改性粘土材料．这些合成手段为制备新型改性粘土材料应用于环保以及化工等方面提供了借鉴．     

Matrices for mono-material composites (MMC). The case of poly(ethylene terephthalate)

The use of the same thermoplastic polymer for both the matrix and the filler in the preparation of composites is very attractive, because such composites are in principle fully recyclable. Recently it has been reported the preparation of a mono-material composite (MMC) made of polypropylene to be used in automobile parts. In this work we report on the preparation and characterization of matrices for quasi MMC made of poly(ethylene terephthalate) (PET). Particularly we found PET copolymers containing isophthalate (IPA) units adequate to be used as matrix.     

酶提取-单颗粒电感耦合等离子质谱法分析樱桃番茄纳米银颗粒及其吸收规律研究

为探究复合保鲜涂膜中AgNPs的迁移情况,采用酶提取的前处理方式,结合单颗粒电感耦合等离子体质谱（SP-ICP-MS）,考察了前处理方式、驻留时间、校准方式以及Ag+浓度等条件对AgNPs准确测定的影响。结果表明：0.1 g樱桃番茄样品在柠檬酸盐体系下使用0.2 g的R-10离析酶可达到消解最适酶剂量;当驻留时间小于100 μs时,测定结果有较好的积分条件以及较高的信背比;采用AgNP尺寸方式进行校准比单独用Ag+标准溶液校准方式的颗粒尺寸测定结果更加准确。采用该方法测定樱桃番茄中加标AgNPs颗粒回收率达到88.9%,粒径实测值为47.8±0.3 nm,粒径检出限为13 nm,颗粒浓度检出限为 7.5×104 particles/L。通过将樱桃番茄暴露于AgNPs涂膜中来探究AgNPs迁移行为,复合保鲜涂膜后的樱桃番茄通过三次洗涤后能够在表面去除大部分AgNPs,但仍有少量AgNPs穿过果表皮浸入果肉组织。该方法灵敏度高,操作简单,能够为揭示AgNPs在农产品及农业生产中的风险提供可靠、准确的表征方法。     

薄板弯曲问题的复合傅里叶级数方法

解析方法与数值方法有效融合是提高计算效能的重要途径．提出薄板弯曲问题的复合傅里叶级数方法．它以解析方法为融合基体,数值方法为融合增强相,是一种新的融合模式．在这种新的融合模式中,傅里叶级数解析解作为变形场的连续表现形式,摆脱了载荷形式和边界条件的强烈依赖性,表现出良好的收敛性态．     

Study on resistance coefficient in compound channels

This paper presents a further study of the Manning and Darcy-Weisbach resistance coefficients, as they play a significant role in assessing the cross-sectional mean velocity, conveyance capacity and determining the lateral distribution of depth mean velocity and local boundary shear stress in compound channels. The relationships between the local, zonal and overall resistance coefficients, and a wide range of geometries and different roughness between the main channel and the flood plain are established by analyzing a vast amount of experimental data from a British Science and Engineering Research Council Flood Channel Facility (SERC-FCF). And the experimental results also show that the overall Darcy-Weisbach resistance coefficient for a compound channel is the function of Reynolds number, but the function relationship is different from that for a single channel. By comparing and analyzing the conventional methods with the experimental data to predict composite roughness in compound channels, it is found that these methods are not suitable for compound channels. Moreover, the reason why the conventional methods can not assess correctly the conveyance capacity of compound channels is also analyzed in this paper.The project supported by the National Natural Science Foundation of China (50279024), the National Key Basic Research and Development Program of China (973 Program) (2003CB415202) and the Specialized Research Fund for the Doctoral Program of Higher Education (20030610039)The English text was polished by Ron Marshall     

电感耦合等离子体质谱法(ICP-MS)测定镍钴锰三元氢氧化物中铅

研究了用电感耦合等离子体质谱法（ICP-MS）测定镍钴锰三元素氢氧化物中铅含量的测定方法。选择了仪器的最佳测量条件、元素测定的质量数,进行了基体元素的干扰等实验。方法测定结果准确、可靠,测定下限小于0.00005%,样品加标回收率在99.2%~101.0%。方法的建立为控制镍钴锰三元素氢氧化物中铅提供了检测依据。     

Mechanical properties of oriented low‐density polyethylene with an oriented lamellar‐stack morphology

A quantitative study was undertaken of the anisotropy of low‐strain mechanical behavior for specially oriented polyethylene with controlled crystalline and lamellar orientation. The samples were prepared by the die drawing of injection‐molded rods of polyethylene and annealing. This produced a parallel lamellar structure for which a simple, three‐dimensional composite laminate model could be used to calculate the expected anisotropy. Experimental data, including X‐ray strain measurements of the lateral crystalline elastic constants, showed good quantitative agreement with the model prediction. The X‐ray strain measurements confirmed that the amorphous regions exert large constraints on the crystalline phase in the lateral directions, where an order of magnitude difference was found between the measured apparent lateral crystalline compliances in the lamellar‐stack sample and the expected values for a perfect crystal. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 755–764, 2000