球形SiO2-Al2O3的制备、结构和性能

将Na2SiO3·9H2O 溶液通过强酸性阳离子树脂进行离子交换得到酸性硅溶胶,再将硅溶胶与铝溶胶及六次甲基四胺混合后采用油柱成型法制备了球形SiO2-Al2O3复合氧化物. 通过XRD、BET 及TPD等手段对样品进行测试和表征, 结果表明, 600 ℃焙烧得到的SiO2-Al2O3中SiO2以无定型形式存在, 其比表面、孔容与表面酸性随SiO2含量的增加而提高, 孔径、堆密度随SiO2含量的提高而减小, 压碎强度基本保持不变.     

复合Fe2O3纳米粒子的高分子微球的结构表征

近年来，复合有机、无机粒子的高分子微球及其特殊性质越来越引起人们的兴趣与关注［1］．获得有机、无机复合微球的方法很多，如在无机粒子存在下的乳液或无皂乳液聚会[2，3]，通过可聚合的表面活性剂在粒子表面形成胶囊化层[4]以及共沉淀法等[5]．这些无机粒子包括氧化钛、氧化铁、氧化铝及氧化硅等．Haga等[6]增发现包覆在聚合物粒子中的CdS与其本体的光电性质不同；单分散的聚合物微球可以在基片上被组装成二维乃至三维有序的结构[7]．这为信息存储、立体印刷等领域提供了新途径．因此，将无机粒子与聚合物复合成为功能化粒子是一项有…     

Luminescence Properties of Tb-Doped Yttrium Disilicate Prepared by the Sol–Gel Method

A sol–gel method for the synthesis of nanosized powders of yttrium disilicate doped with Tb^{3 +} is presented. The influence of grain size and annealing temperature on the structure and luminescence properties of the materials obtained has been investigated. The preparation of glass-ceramic composite has been also described. The effect of incorporating the nanocrystals into sol–gel silica glasses on their physicochemical properties has been shown and discussed. A lack of influence of the annealing above 1300°C on the lifetimes measured for the nanocrystals embedded in the glass, as compared to the Y₂Si₂O₇:Tb^{3 +} powders, has been observed.     

有机/无机杂化复合木材的制备与性能

将硅溶胶/聚丙烯酸酯,有机/无机杂化液浸注于I-69杨木材中,制成有机/无机杂化木材。FT-IR红外光谱、扫描电子显微镜分析了复合木材的微观结构和组成,结果表明,经有机/无机杂化改性后的复合木材,既保持了木材本来的性质,又具有机/无机复合物的某些特性,其力学强度和尺寸稳定性较素材显著提高。     

化学复合镀Ni-P-PTFE镀层的组成分析

近年来化学复合镀技术在工业中应用日益广泛 ,本文运用ＳＥＭ、ＡＥＳ和ＸＰＳ等手段对用化学复合镀制得的Ｎｉ Ｐ ＰＴＦＥ镀层的结构和组分进行了分析 ,并就其耐腐蚀性能与前期得到的Ｎｉ Ｓｎ Ｐ[1 ] 、Ｃｕ Ｓｎ Ｐ[2 ] 、Ｎｉ Ｐ ＣｅＯ2 [3] 、Ｎｉ Ｐ ＳｉＯ2 [4] 镀层进行了比较 ,结果表明 :含量一定的ＰＴＦＥ(聚四氟乙烯 )的共存增强镀层的耐腐蚀性及镀层表面的润滑性。1　实验部分1 1　仪器日产Ｄ/ＭＡＸⅢＡ型Ｘ 射线衍射仪 ,铜靶 ,管压 2 5ｋＶ ,电流 1 0ｍＡ。国产ＪＪＣ 1型润滑湿角测量仪。美国ＰＥＲＫＩＮ ＥＬＭＥＲＰ…     

锌基复合脱硫剂脱硫性能的研究

采用共沉淀法和机械混合法制备了Zn-Cu-Mn复合氧化物和ZCM(Z=ZnO、C=CuO、M=MnO2)复合氧化物，并对两种氧化物的脱硫能力进行了分析，同时也将这二种氧化物与单一的ZnO、MnO2和CuO的脱硫能力进行比较。利用XRD和FPD(火焰光度计)分别对复合氧化物的物质组成、结构和脱硫性能进行了分析。实验证明，Zn-Cu-Mn在250℃～350℃具有良好的脱硫能力，且300℃的脱硫能力最佳；空速为7799h-1时穿透硫容较高。煅烧温度为400℃时，Zn-Cu-Mn的脱硫能力高于ZnO。煅烧温度升高，Zn-Cu-Mn复合氧化物的比表面积和脱硫能力下降，且生成了具有尖晶石结构的CuMn2O4。与Zn-Cu-Mn复合氧化物和ZnO相比，ZCM复合氧化物的脱硫能力较低。煅烧温度为550℃时，ZCM体系中的MnO2分解为Mn2O3，当温度升至750℃时Mn2O3相消失，生成了具有尖晶石结构的CuMn2O4。     

Optimization of the process variables for the synthesis of cardanol-based novolac-type phenolic resin using response surface methodology

Models capable of predicting the maximum extent of conversion (p) of cardanol-based novolac-type phenolic resin, have been developed using response surface methodology to determine the optimum reaction conditions. Three-dimensional response surface and their contour plot were drawn. The maximum extent of conversion (98.93%) was predicted when the cardanol was condensed with formaldehyde (molar ratio 1:0.652) at 119.84 °C for a time period of 3 h with the catalyst (e.g., citric acid) concentration of 1.988% of total volume of cardanol and formaldehyde. The pH of the reaction mixture was maintained at 3.0. These predicted values for optimum process conditions were in good agreement with experimental data.     

PTC特性的复合导电体系中炭粒子分布的逾渗模型与电阻率的计算

综述了炭黑填充型导电高分子复合体系的几种导电理论；讨论了导电载流子分布的各种假说及模型；比较了不同模型的理论预测与实验结果的差异性。     

Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.