Conversion of Mg‐Li Bimetallic Alloys to Magnesium Alkoxide and Magnesium Oxide Ceramic Nanowires

Technologically important composites with enhanced thermal and mechanical properties rely on the reinforcement by the high specific strength ceramic nanofibers or nanowires (NWs) with high aspect ratios. However, conventional synthesis routes to produce such ceramic NWs have prohibitively high cost. Now, direct transformation of bulk Mg‐Li alloys into Mg alkoxide NWs is demonstrated without the use of catalysts, templates, expensive or toxic chemicals, or any external stimuli. This mechanism proceeds through the minimization of strain energy at the boundary of phase transformation front leading to the formation of ultra‐long NWs with tunable dimensions. Such alkoxide NWs can be easily converted in air into ceramic MgO NWs with similar dimensions. The impact of the alloy grain size and Li content, synthesis temperature, inductive and steric effects of alkoxide groups on the diameter, length, composition, ductility, and oxidation of the produced NWs is discussed.     

In-Situ Synthesis and Characterization of Nanocomposites in the Si-Ti-N and Si-Ti-C Systems

The pyrolysis (1000 °C) of a liquid poly(vinylmethyl-co-methyl)silazane modified by tetrakis(dimethylamido)titanium in flowing ammonia, nitrogen and argon followed by the annealing (1000–1800 °C) of as-pyrolyzed ceramic powders have been investigated in detail. We first provide a comprehensive mechanistic study of the polymer-to-ceramic conversion based on TG experiments coupled with in-situ mass spectrometry and ex-situ solid-state NMR and FTIR spectroscopies of both the chemically modified polymer and the pyrolysis intermediates. The pyrolysis leads to X-ray amorphous materials with chemical bonding and ceramic yields controlled by the nature of the atmosphere. Then, the structural evolution of the amorphous network of ammonia-, nitrogen- and argon-treated ceramics has been studied above 1000 °C under nitrogen and argon by X-ray diffraction and electron microscopy. HRTEM images coupled with XRD confirm the formation of nanocomposites after annealing at 1400 °C. Their unique nanostructural feature appears to be the result of both the molecular origin of the materials and the nature of the atmosphere used during pyrolysis. Samples are composed of an amorphous Si-based ceramic matrix in which TiN_xC_y nanocrystals (x + y = 1) are homogeneously formed “in situ” in the matrix during the process and evolve toward fully crystallized compounds as TiN/Si₃N₄, TiN_xC_y (x + y = 1)/SiC and TiC/SiC nanocomposites after annealing to 1800 °C as a function of the atmosphere.     

新型BT-BMT-xBNT无铅高储能密度陶瓷研究

本文采用传统固相反应法,成功制备了新型无铅弛豫铁电陶瓷(1-x)[0.9BaTiO₃-0.1Bi(Mg_0.25Ta_0.5)O₃]-xBi_0.5Na_0.5TiO₃。结果表明,较高居里温度的Bi_0.5Na_0.5TiO₃的引入,使得材料体系中建立了更多的以Bi—O耦合为主的极性纳米区域,弥补了因Bi(Mg_0.25Ta_0.5)O₃的加入导致的宏观极化强度的减少,提高了材料的饱和极化强度,实现了较高储能密度的同时具有更好的温度稳定性。在245 kV/cm电场强度下,x=0.2样品的储能密度约为4.01 J/cm³,储能效率约为84.86%,同时该组分在20~170 ℃储能密度的变化率小于5%,储能效率的变化率小于6%,表现出优异的温度稳定性。     

Evaluation of the piezoelectric behaviour produced by a thick-film transducer using digital speckle pattern interferometry

This paper presents an interferometric measurement of the out-of-plane deflections produced by a piezoelectric transducer, manufactured by thick-film deposition of a ceramic paste over an alumina substrate, when is subjected to a DC electric voltage. It is shown that a digital speckle pattern interferometer with an incorporated phase-shifting facility allows the measurement of nanometer displacements generated by the piezoelectric device. These measurements are used to evaluate the effective piezoelectric charge constant along the polarization direction (d₃₃)_eff that characterizes the thick-film transducer.     

Anomalous magnetic properties of an iron film system deposited on fracture surfaces of α-Al2O3 ceramics

An iron film percolation system is fabricated by vapour-phase deposition on fracture surfaces of α-Al2O3 ceramics. The zero-field-cooled （ZFC） and field-cooled （FC） magnetization measurement reveals that the magnetic phase of the film samples evolve from a high-temperature ferromagnetic state to a low-temperature spin-glass-like state, which is also demonstrated by the temperature-dependent ac susceptibility of the iron films. The temperature dependence of the exchange bias field He of the iron film exhibits a minimum peak around the temperature T=5 K, which is independent of the magnitude of the cooling field Hcf. However, for T 〉 10K, （1） He is always negative when Hcf=2kOe and （2） for Hcf= 20 kOe （1Oe≈80 A/m）, He changes from negative to positive values as T increases. Our experimental results show that the anomalous hysteresis properties mainly result from the oxide surfaces of the films with spin-glass-like phase.     

The Formation of Porous Membranes by Filtration of Aerosol Nanoparticles

Flame-generated aerosol particles of Al₂O₃ were deposited by gas filtration on two types of porous and ceramic tubes of -Al₂O₃ with mean pore diameters of 450 and 2700nm, respectively. The particles were aggregates with average mobility diameters in the range of 30–100nm and primary particle diameters of 4–8nm. The particles are characterized by differential mobility analysis, transmission electron microscopy, and by their specific surface area. The deposited membranes are characterized by gas permeability measurements, scanning electron microscopy, and by their pore size distribution from nitrogen capillary condensation. The particles form a distinct, homogeneous membrane layer with a porosity of 90% on top of the substrate surface and only penetrate slightly into the substrate structure. The mean pore sizes of the deposited membranes determined by nitrogen condensation agree approximately with those determined by gas permeation and the specific surface area. The mean pore diameter varies in the range of 30–70nm. The gas permeability of the deposited membranes is related to the specific surface area but influenced by the high porosity. The mean pore size and the permeability of the membranes are almost independent of the substrate structure.The development of a membrane with uniform properties is preceded by a short initial period in which the deposited particles, with an equivalent membrane thickness of roughly 2m, have a significantly lower permeability than the ultimately developed uniform membrane layer. This effect is particularly significant for the aerosol particles with the lowest mean size, probably due to particles deposited in the pore mouths of the substrate.The particles and the deposited membranes are X-ray amorphous but retain their specific surface area on heating to even high temperatures. When the membranes are heated to 1473K for 10h, X-ray diffraction shows a mixture of - and -alumina, accompanied by a partial disintegration of the membrane and a considerable loss of surface area.     

Synthesis of In<Subscript>2</Subscript>O<Subscript>3</Subscript>nanoparticles by thermal decomposition of a citrate gel precursor

This paper describes the synthesis of indium oxide by a modified sol–gel method, and the study of thermal decomposition of the metal complex in air. The characterization of the intermediate as well as the final compounds was carried out by thermogravimetry, differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and small angle X-ray scattering. The results show that the indium complex decomposes to In₂O₃ with the formation of an intermediate compound. Nanoparticles of cubic In₂O₃ with crystallite sizes in the nanosize range were formed after calcination at temperatures up to 900°C. Calcined materials are characterized by a polydisperse distribution of spherical particles with sharp and smooth surfaces.This revised version was published online in August 2005 with a corrected issue number.     

Microstructural prototyping of ceramics by kinetic engineering: applications of spark plasma sintering

The significance of kinetics on the development of microstructures in connection with sintering of ceramics is well recognized. In practice, however, it still remains a challenge to prepare designed microstructures via engineering the sintering kinetics because of an insufficient understanding of the different operative mechanisms that are in many cases overlapping. In this article the kinetic issues involved in sintering are described and discussed with respect to their potential for prototyping microstructures that yield desired properties. By exploiting and mastering the differences present in the kinetics of grain sliding, densification, chemical reactions, and grain growth, respectively, we have established processing principles for producing bulk ceramics with microstructures consisting of nano-sized grains, aligned grains, and/or non-equilibrium-phase constitutions, and for achieving radically improved superplasticity in brittle ceramics. Although the studies quoted in this article were mainly carried out by spark plasma sintering, more general implications of them are expected, including efficient particle sliding, deformation-induced dynamic ripening, superplastic deformation-induced dynamic ripening, and non-equilibrium integration.