Semi-micro solvent extraction as a rapid and efficient preconcentration technique for the determination of n-alkanes in oil-contaiminated water and soil samples by capillary gas chromatography

Summary In this study, a rapid and efficient semi-micro extraction procedure is presented for the extraction of some higher n-alkanes from water and soil samples. In the case of water samples n-hexane was used as the organic phase in a phase volume ratio (volume of aqueous phase/volume of organic phase) higher than 285, while in the case of soil samples, extraction with n-hexane was carried out in the presence of an excess of 2 M NaCl solution. The extraction rate from soil samples is very high and is better than Soxhlet extraction, comparable with supercritical fluid extraction. High preconcentration factor in water samples allows the limits of detection to be in the ng.mL⁻¹ level with the use of gas chromatographic analysis. Flame ionization detector was used for monitoring the analytes. The obtained recoveries of all studied compounds from both water and soil samples are higher than 90%. This method was successfully used to determine some n-alkanes in municipal wastewater and contaminated soil.     

Scaling Function Between the Exponential-6 and the Generalized Lennard-Jones Potential Functions

The van der Waals forces for non-bonded interaction can be expressed either by the Exponential-6 or by the Lennard-Jones(m-n) potential functions, whereby m > n. Hitherto a relationship exists between the Exponential-6 and the Lennard-Jones(12-6) potential functions, with a scaling factor = 13.772 at or near the equilibrium and = 12.0 for long range interaction. This paper attempts to develop relationships between Exponential-6 and a more generalized Lennard-Jones(m-n). Analysis reveals that the relationship exists only when n = 6 and that two sets of scaling factors (as functions of index m) applies for the relationship between Exponential-6 and the Lennard-Jones(m-6), whereby m > 6.     

Fractal phenomena in molecular mechanics calculation

It is proposed that in molecular mechanics calculation points belonging to various stable or meta-sta-ble conformtrs are mixed up and form fractal structures in conformation space.The calculation results show the following two phenomena:(i)Two levels of structure with fractal feature were observed.Around the conformer without mirror symmetry points belonging to the conformer and its enantiomer are mixed up and form the first level of fractal structure; on the boundary of the attractive basin o{ each atlractor,points belonging to different attractors form the second level of fractal structure.(ii) The variation of molecular mechanics parameters will influence the structure and area of each attractive basin significantly The above phenomena may become the basis of a new method for solving the troublesome multi-minimum-point problem in molecular mechanics calculation.     

细观等效理论预测再生混凝土宏观力学参数北大核心CSCD

预测分析再生混凝土各组分对再生混凝土宏观力学参数的影响是开展再生混凝土基本力学性能的一种方式.为了分析再生混凝土各组分对再生混凝土宏观力学参数的影响,根据再生混凝土的细观结构组成,建立了细观等效模型,利用扭转变形、细观夹杂理论、弹性等效思想和M-T模型方法,推导了由原生骨料、老界面层、老水泥砂浆、新界面层和新水泥砂浆等组成的再生混凝土的宏观力学参数预测模型.预测结果表明,随着再生骨料的取代率增加,水泥砂浆的含量不断增加,再生混凝土孔隙率也随之增大,导致再生混凝土的Poisson比随之增大,弹性模量、剪切模量和体积模量不断降低.模型的预测结果较好地反映了再生混凝土宏观力学参数随再生骨料取代率的增加不断变化的这一趋势,也为再生混凝土宏观力学参数的预测提供了一条简单实用的新方法,有利于再生混凝土基本力学性能的研究分析.     

Minimax principles for elliptic mixed hemivariational–variational inequalities

In this paper, minimax principles are explored for elliptic mixed hemivariational–variational inequalities. Under certain conditions, a saddle-point formulation is shown to be equivalent to a mixed hemivariational–variational inequality. While the minimax principle is of independent interest, it is employed in this paper to provide an elementary proof of the solution existence of the mixed hemivariational–variational inequality. Theoretical results are illustrated in the applications of two contact problems.     

Structural optimization with parameter-transfer finite element

A mathematical method to solve structural problems, using parameter-transfer finite elements (P-TFE) was recently proposed by the authors [1] [2] [3]. The proposed transfer finite element approach is able to create a mathematical model of a structure, taking into account directly the whole behaviour of the structure under dynamic, aerodynamic, and thermal actions, and not by assembling, in a separate fashion, the stiffness and the mass matrix on one side and the external load vector as performed by the classical finite element procedure.The purpose of this paper is to apply the above methodology to optimization problems, in particular to obtain the minimum structural weight for a beam, under primary constraints on buckling load or natural frequencies.The use of P-TFE in the field of structural optimization overcomes most difficulties of the usual techniques of solution and the element is particularly useful in the evaluation of the sensitivity matrix.The formulation of the optimization problem based on P-TFE is presented and some applications are studied. The numerical results obtained are compared with other existing methodologies and briefly discussed.

---

Sommario Gli autori hanno già proposto un metodo per studiare problemi strutturali [1] [2] [3], introducendo una nuova metodologia di discretizzazione, basata sull'impiego di elementi finiti di trasferimento, funzioni esplicite di un parametro, indicati come P-TFE. Tali elementi sono in grado di rappresentare, in similitudine alla funzione di trasferimento, il comportamento completo dell'elemento strutturale in esame, soggetto ad azioni dinamiche, aerodinamiche e termiche; sono parimenti in grado di produrre, in similitudine al metodo degli elementi finiti, un modello matematico discreto di un continuo.Scopo del presente lavoro è di applicare detta metodologia a problemi di ottimizzazione, in particolare alla ricerca del minimo peso per una trave che mantenga inalterate le sue caratteristiche di carico critico o le frequenze naturali di vibrazione.Vengono quindi presentati alcuni risultati numerici dei casi esaminati e confrontati con quelli ottenuti da altri autori con l'impiego di altre metodologie.

---

List of Symbols {B} _m vector of the generalized state variables - {C} _m vector of integration constants - [I] unit matrix - EI bending stiffness - A cross-sectional area - u adimensional thickness - l beam length - M,M bending moment - [N] _m shape function ofm-th order - [N*] shape function atx ₀ - P axial load - [R] _i transfer matrix of thei-th element - T,T shear force - w transverse displacement - x adimensional independent variable - x ₀ value ofx at the left of the element - {Y} vector of state variables - {Y*} imposed condition atx ₀ - _0m Kronecker delta with the first pedix always set equal to zero - normalized eigenfrequency - normalized buckling load - mass density     

Lattice-BGK approach to simulating granular flows

Many continuum theories for granular flow produce an equation of motion for the fluctuating kinetic energy density (granular temperature) that accounts for the energy lost in inelastic collisions. Apart from the presence of an extra dissipative term, this equation is very similar in form to the usual temperature equation in hydrodynamics. It is shown how a lattice-kinetic model based on the Bhatnagar-Gross-Krook (BGK) equation that was previously derived for a miscible two-component fluid may be modified to model the continuum equations for granular flow. This is done by noting that the variable corresponding to the concentration of one species follows an equation that is essentially analogous to the granular temperature equation. A simulation of an unforced granular fluid using the modified model reproduces the phenomenon of clustering instability, namely the spontaneous agglomeration of particles into dense clusters, which occurs generically in all granular flows. The success of the continuum theory in capturing the gross features of this basic phenomenon is discussed. Some shear flow simulations are also presented.     

Coulomb pair density matrix I

The Coulomb pair density matrixG (r, r) for attractive and repulsive potentials is not only interesting for determining the two-particle effective potentials, but it is also essential in numerical studies of quantum systems. A high-temperature approximation is obtained for logG (r, r), in the form of simple integrals or series expansions; large-distance expansions are also given.     

Positivity of entropy production in nonequilibrium statistical mechanics

We analyze different mechanisms of entropy production in statistical mechanics, and propose formulas for the entropy production ratee() in a state . When is steady state describing the long term behavior of a system we show thate()0, and sometimes we can provee()>0.     

18－冠－6及其碱金属配合物构象和稳定性的分子力学研究

１８－冠－６及其碱金属配合物构象和稳定性的分子力学研究张士国,李红,杨频（滨州师范专科学校滨州２５６６０４）（山西大学分子所太原０３０００６）关键词分子力学,冠醚,配合物,构象１８－冠－６及其大部分配合物的晶体结构已被测定,但由于存在晶体堆积能而使分...