界面弧形裂纹对混凝土开裂强度的影响研究

混凝土由于水分蒸发、干缩、泌水以及骨料与砂浆变形不一致等原因会导致骨料与砂浆的界面层中产生弧形裂纹,从而对混凝土开裂强度产生很大影响.从细观角度将混凝土视作由粗骨料和水泥砂浆组成的两相复合材料,并将界面层视为粗骨料与水泥砂浆的接触层进行分析.首先基于相互作用直推估计(interaction direct derivative, IDD)法,考虑混凝土中骨料颗粒的相互作用,将施加在混凝土表征体积元的远场外荷载等效为无限大基体中含单一骨料的等效外荷载.然后,将等效外荷载转化为最大和最小主应力,基于断裂力学理论得到界面层中弧形裂纹的应力强度因子,并根据复合型裂纹幂准则判断弧形裂纹是否发生开裂,进而来研究混凝土开裂强度的变化规律.通过与数值模拟结果的比较,验证了界面弧形裂纹应力强度因子解析解的有效性,参数分析结果表明,当裂纹与最大主应力垂直或与最小主应力呈45°夹角时,骨料周围弧形裂纹最易发生开裂破坏.随着裂纹长度增加,混凝土受拉和受压开裂强度先减小后增大,且均存在最不利的裂纹长度.混凝土开裂强度随着骨料体积分数的增加而增大,随着骨料粒径的增大而减小.在裂纹长度较小时,增大骨料的弹性模量有利于提高混凝土开裂强度.骨料周围承受同号应力可以提高混凝土的开裂强度,反之,异号应力会降低开裂强度.     

含孔隙混凝土二维细观建模方法研究

根据混凝土的细观组成和结构特点,对传统二维建模方法加以继承与改进,提出了一种高效的分步入侵判定算法.将孔隙直观地反映在模型中,建立了不同的含孔隙混凝土细观模型.对含圆形、椭圆形、多边形骨料与圆形、椭圆形孔隙的混凝土标准试件分别进行了建模研究,结果表明本文的算法具有较强适用性.同时,通过对不同面积率与多种形状骨料/孔隙混凝土的大量建模进一步验证了该算法的效率.模拟了混凝土试件在单轴压缩下的准静态力学性能,分析了混凝土内部孔隙对其裂纹扩展的主要路径、破坏模式以及宏观力学性能的显著影响.     

FRP加固再生混凝土圆柱力学性能试验研究

通过混凝土圆柱轴心受压试验,研究了0%、50%、100%3种粗骨料取代率对再生混凝土圆柱抗压强度的影响以及碳纤维(CFRP)布或玄武岩(BFRP)布加固后圆柱的力学性能。试验结果表明:再生骨料取代率对再生混凝土圆柱的力学性能有一定影响,取代率为100%时,圆柱的抗压强度和极限应变均有所增加;而取代率为50%的再生混凝土的横向变形系数略低于天然骨料混凝土的横向变形系数。纤维增强型复合材料(FRP)加固再生混凝土能有效提高结构的承载能力和改善其变形性能,增加构件的延性;其中CFRP加固比BFRP加固效果更为显著。FRP加固再生混凝土与加固天然混凝土类似,其应力-应变曲线表现为明显的双线性,与所选模型计算结果符合良好。     

Prediction of Concrete Meso-Model Stress-Strain Curves Based on GoogLeNet北大核心CSCD

非均质复合材料的宏观力学性能往往取决于细观组分的分布方式和力学性能，但是建立明确的关系表达式极其困难。为了应对这一挑战，以混凝土为研究对象，提出了一种基于深度学习的策略，能够高效、准确地通过细观模型图像信息获取应力-应变曲线。首先，使用基于卷积神经网络（convolutional neural network，CNN）的GoogLeNet模型进行图像信息识别和提取，并针对应力-应变曲线的复杂性特点，进行了数据预处理操作，并且设计了相应的多任务损失函数。数据集中的细观模型图像采用基于Monte-Carlo的随机骨料模型生成，并且使用数值模拟试验获取对应细观模型的单轴压缩应力-应变曲线。最后，通过对神经网络的训练和测试评估了所提出方法的可行性。结果表明，GoogLeNet模型训练效率和预测精度均优于AlexNet和ResNet模型，具有良好的泛化能力和鲁棒性。     

钢管再生混凝土柱承载力计算对比及可靠度分析

基于钢管再生混凝土轴压构件承载力的试验结果与采用各国规程的计算结果的对比分析,从统计意义上表明方钢管再生混凝土构件用DBJ13-51-2003规程的计算结果与试验结果吻合较好,圆钢管再生混凝土构件用DL/T5085-1999规程较好.并利用改进一次二阶矩法(JC法)对钢管再生混凝土轴压构件的极限承载力进行了可靠度分析,分析结果表明:钢管再生混凝土构件承载力的可靠度指标随荷载组合和荷载效应比的变化而变化,随再生混凝土强度等级的提高而增大,钢管壁厚、再生骨料取代率对可靠指标无明显影响.     

考虑混凝土材料非均质特性的近场动力学模型

混凝土内部微细观结构影响其损伤和破坏行为.鉴于传统连续介质力学在模拟混凝土损伤累积和渐进破坏过程中存在的问题,基于数值图像技术获得混凝土试件的内部骨料形态,采用键型近场动力学理论,建立了能够考虑混凝土非均质特性的近场动力学模型,并在ABAQUS平台下开发了相应的计算模块,进行了混凝土试样的拉伸和压缩细观破坏分析.结果表明:近场动力学模型和数值方法能够成功模拟混凝土材料的复杂破坏过程,得到的破坏现象与试验结果吻合程度较好,进一步探究了混凝土材料的破坏机制,完善了混凝土结构的破坏分析过程.     

湿热环境中复合材料层合圆柱薄壳的屈曲和后屈曲

在宏-细观力学模型框架下,讨论湿热环境对复合材料层合圆柱薄壳在轴向压缩作用下屈曲和后屈曲行为的影响.基于细观力学模型复合材料性能与湿度和温度变化有关.壳体控制方程基于经典层合壳理论,并包括湿热效应.壳体屈曲的边界层理论被推广用于湿热环境的情况,相应的奇异摄动法用于确定层合圆柱薄壳的屈曲荷载和后屈曲平衡路径.分析中同时计及壳体非线性前屈曲变形和初始几何缺陷的影响.数值算例给出完善和非完善正交铺设层合圆柱薄壳在不同湿热环境中的后屈曲行为.讨论了温度和湿度,纤维体积比率,壳体几何参数,铺层数,铺层方式和初始几何缺陷等各种参数变化的影响.     

基于等效滑移与潜在硬化机制的多晶金属亚宏观弹塑性模型

将多晶材料中晶片之间与晶粒界面上的滑移作为消耗塑性功的主要物理机制,提出一个由亚宏观滑移系作为耗能构元的材料模型,并用功共轭方法得到了亚宏观滑移系的等效滑移剪切率.重新给出了滑移系自身运动硬化、潜在硬化及Bauscninger效应的力学描述,导出了本构方程.在探讨材料性质参数对后继屈服面形状及尺寸变化影响的基础上,论述了模型的基本性质.与以晶粒为基本构元的多晶体自洽理论比较,所得到的本构方程具有简洁的数学表达,而且能精确有效地预测多晶金属材料在复杂加载条件下的宏观弹塑性力学行为.     

横观各向同性基体复合材料的等效弹性常数

细观力学的一个主要研究内容是求复合材料的等效弹性性能.常见的细观力学模型解析公式一般假定基体各向同性且只存在纤维和基体两相材料,实际复合材料的基体和纤维之间往往存在一个横观各向同性的界面相,该三相复合材料的等效性能可由两个两相复合材料性能的组合得到,这就需要求出横观各向同性基体复合材料的等效弹性常数.该文基于两相同心圆柱模型,首先导出了横观各向同性基体内应力与增强纤维内应力之间桥联矩阵的解析公式,与基于数值积分Eshelby张量得到的Mori-Tanaka桥联矩阵相符,再进一步获得了横观各向同性基体复合材料的5个弹性常数显式表达式.文中还给出了扩展的桥联模型显式公式.选用适当的桥联参数,两种模型所得结果十分接近.     

变截面二维功能梯度微梁的振动和屈曲特性北大核心CSCD

基于修正的偶应力理论和Timoshenko梁理论,应用变分原理建立了变截面二维功能梯度微梁的自由振动和屈曲力学模型.模型中包含金属组分和陶瓷组分的材料内禀特征尺度参数,可以预测微梁力学行为的尺度效应.采用Ritz法给出了任意边界条件下微梁振动频率和临界屈曲载荷的数值解.数值算例表明:微梁厚度减小时,无量纲一阶频率和无量纲临界屈曲载荷增大,尺度效应增强.锥度比对微梁一阶频率的影响与边界条件密切相关,同时,对应厚度和对应宽度锥度比的影响也有明显差异.变截面微尺度梁无量纲一阶频率随着陶瓷和金属的材料内禀特征尺度参数比的增加而增大,且不同边界条件时增大程度不同.厚度方向和轴向功能梯度指数对微梁的一阶频率和屈曲载荷也有显著的影响.     

Numerical investigations on autogenous shrinkage of cement paste and mortar

Autogenous shrinkage of cement paste and concrete is defined as the macroscopic length change occurring with no moisture transferred to the exterior surrounding environment. It is a result of chemical shrinkage affiliated with the hydration of cement particles and the ongoing process of self-desiccation. The process of self-desiccation can be modeled starting from the formation of the capillary pore space during hydration in the cement paste. In this proposal a working model will be introduced explaining the difficulties to obtain the autogenous shrinkage strains directly from a simulated or measured microstructure of cement paste. In a second step the autogenous shrinkage of a hardening cement mortar was described on a mesoscopic level. It based on measurements on cement paste. The mortar simply consists of cement paste and a defined fraction of spherical aggregates with a known modulus of elasticity. Furthermore the influence of the interfacial transition zone (ITZ) is studied in numerical simulations. The results of these finite-element-calculations are introduced and compared with testing results of the autogenous shrinkage of hardening mortar samples. (© 2009 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Elastic characteristics of a cement-based composite reinforced with steel grid ribbons

A method is proposed for the estimation of elastic characteristics of a cement mortar orthogonally reinforced with punched steel grid ribbons. The method proposed takes into account the geometry of grids, the distance between ribbons, and the elastic properties of cement mortar and steel.     

Elastic characteristics of a cement-based composite reinforced with steel grid ribbons

A method is proposed for the estimation of elastic characteristics of a cement mortar orthogonally reinforced with punched steel grid ribbons. The method proposed takes into account the geometry of grids, the distance between ribbons, and the elastic properties of cement mortar and steel.Riga Technical University, Riga, LV-1047 Latvia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 2, pp. 173–180, March–April, 1999.     

Elastic displacements of a cement-based composite beam reinforced with punched steel grids

Using Mohr's method, a procedure is proposed for calculating the elastic displacements of a cement-based composite beam reinforced with punched steel grid ribbons. The approach proposed takes into account a possible asymmetry of the structure, the geometry of grids, and the elastic properties of cement mortar and steel.     

The Boussinesq–Mindlin problem for a non-homogeneous elastic halfspace

Boussinesq’s problem for the indentation of an isotropic, homogeneous elastic halfspace by a rigid circular punch constitutes a seminal problem in the theory of contact mechanics as does Mindlin’s problem for the action of a concentrated force at the interior of an isotropic, homogeneous elastic halfspace. The combined action of the surface indentation in the presence of the interior loading is referred to as the Boussinesq–Mindlin problem, which has important applications in the area of geomechanics. The Boussinesq–Mindlin problem, which represents a self-stressing loading configuration, serves as a useful model for interpreting the mechanics of indentation of geologic media for purposes of estimating their bulk elasticity properties. In this paper, the analysis of the problem is extended to include an exponential variation in the linear elastic shear modulus of the halfspace region.     

一种预测界面裂纹形成的新方法

本文提出了一种预测界面裂纹形成的新方法,称为“β=0法”.这是一种变换方法,通过调整有关材料弹性常数,把振荡应力场变换为非振荡应力场.界面韧性曲线将随调整后新的材料性质而改变.本文方法预测的临界荷载与界面断裂力学预测的临界荷载严格一致.最后通过几个实例说明了保持能量释放率不变的情况下,怎样实施β=0法.     

耗散力学和非线性耗散型方程的精确解——耗散力学原理和应用(Ⅰ)

本文是文[1～4]的继续和升华.(1)在本文中,我们根据互补性原理,建立了耗散力学.它是与量子力学相对应的一种耗散理论.可以用这种理论来统一地处理非平衡态热力学和粘滞流体动力学问题,并可以用它来处理量子力学中各种耗散和不可逆的问题.耗散力学的基本方程是与Schr?dinger方程或Dirac方程相对应的一类本征值方程;(2)在本文中,我们将一些基本的非线性耗散型方程,特别是作为宏观非平衡态热力学和粘滞流体动力学基本方程的Navier-Stokes方程,统一地归结为耗散力学基本方程的可积性条件,从而为利用散射反演方法求它们的精确解扫平了道路.     

On geometric ideas which lie at the foundation of quantum theory

Part I advances the hypothesis that between any two events on the world-line of a particle there can be at most finitely many intermediate events. From this it draws the conclusion that the space-time coordinates of events do not have precise meanings. Part II modifies the Feynman integral in a way which is analogous to the replacement of white noise by Gaussian noise. It thereby obtains a version of the quantum mechanics for a nonrelativistic particle in a potential. In the new discrete quantum theory, space coordinates have probabilistic rather than precise meanings; the energy of a free particle is a bounded operator; and the potential energy is a compact operator. It is argued that the differential scattering cross section for elastic scattering is unchanged when taken in the Born approximation.     

Imperfect interface effect for nano-composites accounting for fiber section shape under antiplane shear

This paper investigates the elastic responses of fibrous nano-composites with imperfectly bonded interface under longitudinal shear. The proposed imperfect interface model is the shear lag (or the spring layer) model; the presented nano interfacial stress model is the Gurtin–Murdoch surface/interface model; and the three-phase confocal elliptical cylinder model is the geometry model accounting for the fiber section shape. By virtue of the complex variable method, a generalized self-consistent method is employed to derive the closed from solution of the effective antiplane shear modulus of the fibrous nano-composites with imperfect interface. Five existing solutions can be regarded as the limit form the present analytic expression. The influences of the interface elastic constant, the interfacial imperfection parameter, the size of the elliptic section fiber, the fiber section aspect ratio, the fiber volume fraction and the fiber elastic property on the effective antiplane shear modulus of the nano-composites are discussed. Particularly, numerical results demonstrate that the interfacial elastic imperfection will always cause a significant reduction in the effective antiplane shear modulus; and the fiber interface stress effect on the effective modulus of the fibrous nano-composites will weaken with the interfacial imperfection increases.