锐钛矿型纳米TiO2介孔粉体表面织构的研究

以硫酸钛和尿素为原料,聚乙二醇-1000为空间构造剂,104℃下经尿素水解均匀沉淀法研制颗粒分散均匀、粒径可控的高热稳定性锐钛矿型纳米TiO2介孔粉体,并对其晶相、颗粒大小、比表面积、形貌和孔道结构进行了表征.结果表明,未经任何热处理的TiO2粉体即为锐钛型晶相,颗粒为均匀分散的类球型颗粒,且颗粒间形成直通型的介孔孔道,其孔径在10～30nm之间.控制焙烧温度可以达到控制颗粒大小及形貌的目的,经850℃焙烧5h的样品仍保持锐钛矿型晶相,未出现向金红石型晶相转变的迹象.     

Mesoporous electrode material from alumina-stabilized anatase TiO2 for lithium ion batteries

A mesoporous electrode material whose structure is composed of anatase nanocrystals stabilized by alumina is reported. Powder X-ray diffraction shows the anatase phase only, but micro-Raman spectroscopy shows that the materials have a core-shell morphology with grains of bulk anatase covered by a thin rutile layer on the surface. This structure is unique when compared to analogous materials stabilized by zirconia (PNNL-1). Nitrogen adsorption isotherms demonstrate a monotonous increase in surface area and mesopore volume with increasing Al content. Thin film electrodes from these materials were characterized by lithium insertion electrochemistry. Cyclic voltammograms exhibit significant differences in Li accommodation in Al-free and Al-stabilized materials.     

Mesoporous silica nanospheres with the ability of photo-driven releasing sandela 803 for the application to wallpaper

Mesoporous silica nanospheres loaded with sandela 803 (S803@MS-S) are prepared for application to wallpaper. The nano-fragrance has high encapsulation efficiency and property of photo-driven release.     

Characterization of mesoporous nanocrystalline TiO2 photocatalysts synthesized via a sol-solvothermal process at a low temperature

Nanocrystalline TiO₂ samples with mesoporous structure were prepared via a solvothermal treatment of surfactant-stabilized TiO₂ sols. The samples were obtained from media of different acidities including nitric acid, deionized water, and ammonia (denoted as HT-1, HT-2 and HT-3, respectively). These samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂-sorption (BET surface area), micro-Raman spectroscopy, infrared absorption spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of the samples were tested by the self-photosensitized degradation of an azo dye, Mordant Yellow 10 (MY), in aqueous solution under visible light irradiation. The results reveal that all three samples have high surface area and are pure anatase phase. The sample prepared in nitric acid medium possesses the most ideal mesoporous structure and also exhibits a blue shift in the Raman spectrum. All three samples show much higher photocatalytic activity than the commercial P-25. The activity order of the three samples is HT-1>HT-2>HT-3.     

Mesoporous titanium dioxide as a novel solid-phase extraction material for flow injection micro-column preconcentration on-line coupled with ICP-OES determination of trace metals in environmental samples

Mesoporous titanium dioxide as a novel solid-phase extraction material for flow injection micro-column preconcentration on-line coupled with ICP-OES determination of trace metals (Co, Cd, Cr, Cu, Mn, Ni, V, Ce, Dy, Eu, La and Yb) in environmental samples was described. Possessing a high adsorption capacity towards the metal ions, mesoporous titanium dioxide has found to be of great potential as an adsorbent for the preconcentration of trace metal ions in samples with complicated matrix. The experimental parameters including pH, sample flow rate, volume, elution and interfering ions on the recovery of the target analytes were investigated, and the optimal experimental conditions were established. Under the optimized operating conditions, a preconcentration time of 90 s and elution time of 18 s with enrichment factor of 10 and sampling frequency of 20 h⁻¹ were obtained. The detection limits of this method for the target elements were between 0.03 and 0.36 μg L⁻¹, and the relative standard deviations (R.S.D.s) were found to be less than 6.0% (n =7, c =5 ng mL⁻¹). The proposed method was validated using a certified reference material, and has been successfully applied for the determination of the afore mentioned trace metals in natural water samples and coal fly ash with satisfactory results.     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

孔壁部分有序化的介孔二氧化硅材料的合成与表征

采用一种“改进的二次晶化”的方法处理介孔二氧化硅SBA-15. 用X射线衍射(XRD)、 透射电镜(TEM)、 电子衍射(ED)、 红外光谱(FTIR)以及固体核磁共振(NMR)等多种技术对样品进行了表征.　结果表明， 在所得样品的孔壁中, 原子的排列方式与普通介孔二氧化硅材料的孔壁不同， 显示一定程度的有序性. 同时, 高度有序的介孔结构得到很好的保持, 且样品的水热稳定性大幅度提高.     

Synthesis and characterization of nanoparticulate MnS within the pores of mesoporous silica

Mesoporous silica was loaded with nanoparticulate MnS via a simple post-synthesis treatment. The mesoporous material that still contained surfactant was passivated to prevent MnS formation at the surface. The surfactant was extracted and a novel manganese ethylxanthate was used to impregnate the pore network. This precursor thermally decomposes to yield MnS particles that are smaller or equal to the pore size. The particles exhibit all three common polymorphs. The passivation treatment is most effective at lower loadings because at the highest loadings (SiO₂:MnS molar ratio of 6:1) large particles (>50 nm) form at the exterior of the mesoporous particles. The integrity of the mesoporous network is maintained through the preparation and high order is maintained. The MnS particles exhibit unexpected ferromagnetism at low temperatures. Strong luminescence of these samples is observed and this suggests that they may have a range of important application areas.     

介孔分子筛MCM-41表面的有机胺功能化及其应用

采用γ-胺丙基三甲氧基硅烷与表面硅羟基的反应,对介孔分子筛MCM-41进行了有机胺功能化.并对其进行了表征.XRD、比表面积测定、元素分析、TG、FT-IR和TEM的测定结果均表明,MCM-41表面成功地接枝上了有机胺功能基团而六方结构特征基本保持.在有机胺功能化的MCM-41上固载Ru基催化剂,并将其用于CO2加H2合成HCOOH反应,所显示的活性优于相应的均相催化剂,并且该催化剂具有较好的回收再用性能.     

SXI route to mesostructured materials from Fau and Beta zeolite precursors: A comparative study of their assembly behaviors in extremely acidic media

Mesoporous molecular sieves were synthesized from Beta and Fau zeolite precursors through S⁺X⁻I⁺ route under extremely acidic conditions in parallel (designated as M_Beta and M_Fau, respectively). The textural properties of M_Fau were different from its M_Beta counterpart but resembled normal MCM-41 silica from TEOS. Al content in M_Beta was almost equivalent to that in the initial Beta zeolite precursors, whereas only trace Al species was present in M_Fau from elemental analysis results. The hydrothermal stability of M_Beta after post-synthesis ammonia treatment was considerably improved compared with normal MCM-41 aluminosilicates, whereas the M_Fau after the same procedure was as unstable as normal MCM-41 silica. Thus, the assembly behaviors of Beta and Fau zeolite precursors were comparatively studied based on these results. The microstructure of Fau zeolite precursors were degraded by the extremely acidic condition, and Al species was dissolved into the synthesis mixture. However, Beta zeolite precursors survived the chemical attack of extremely acidic media and were incorporated into mesostructured framework as primary building units.