Preparation, phase transformation and photocatalytic activities of cerium-doped mesoporous titania nanoparticles

Cerium-doped mesoporous TiO₂ nanoparticles with high surface area and thermal stable anatase wall were synthesized via hydrothermal process in a cetyltrimethylammonium bromide (CTAB)/Ti(SO₄)₂/Ce(NO₃)₄/H₂O system. The obtained materials were characterized by XRD, FESEM, HRTEM, FTIR spectroscopy, nitrogen adsorption and DRS spectra. Experimental results indicated that the doping of cerium not only increased the surface area of mesoporous TiO₂ nanoparticles, but also inhibited the mesopores collapse and the anatase-to-rutile phase transformation. Moreover, the undoped, doped anatase mesoporous nanoparticles exhibit higher photocatalytic activity than commercial photocatalyst (Degussa, P25), but the maximum photodegradation rate corresponds to the undoped mesoporous TiO₂ nanoparticles. The lower photocatalytic activities of cerium-doped samples compared with undoped one may be ascribed to that the doped cerium partially blocks titania's surface sites available for the photodegradation and absorption of Rhodamine B (RB).     

Anchored palladium bipyridyl complex in nanosized MCM-41: a recyclable and efficient catalyst for the Kumada-Corriu reaction

A palladium bipyridyl complex anchored onto nanosized mesoporous silica MCM-41 catalyzed the cross-coupling of aryl iodides or bromides with Grignard reagents to provide the corresponding biaryls in high yields. The reaction proceeded smoothly with an equal molar amount of substrate and Grignard reagent in the presence of 0.2-0.02 mol % of catalyst in THF at 50 °C or under refluxing conditions. The catalyst prepared may be used in a very low percentage, recovered after reaction, and re-used.     

海泡石制备HMS和AlSBA介孔分子筛的研究

通过酸浸和模板合成处理，海泡石直接合成有序介孔二氧化硅和含铝的介孔二氧化硅. 海泡石用盐酸处理后120 ℃下在NaOH溶液中处理72 h, 得到具有HMS结构特征的介孔分子筛；在含铝的碱性溶液中处理后得到具有AlSBA结构的介孔分子筛. 并用SAXRD、BET、TPD表征了介孔分子筛的物相结构、比表面积、孔径分布和表面酸性. 两种介孔分子筛的比表面积分别为508 m2•g^-1和946 m2•g^-1，孔径分别为3.4 nm和3.9 nm，且孔径分布窄. NH3-TPD结果表明分子筛表面都有两个酸中心，随着Al原子的引入，表面酸性增强.     

有机官能化MSU-x孔分子筛的界面特征

MSU- x是自 M41S系列介孔分子筛问世以来所合成的另一类新型介孔分子筛材料 ,它具有三维立体交叉排列的 " worm- like"孔道结构特征及采用中性模板剂、廉价无毒等诸多合成优点 [1～ 4],有着潜在的应用价值 .为了改善纯硅的介孔材料的表面和孔道性质 ,扩大其应用领域 ,除了在骨架引入金属离子或在其孔道中负载催化活性物质外 ,对介孔材料进行有机官能化制备无机-有机杂化材料改善其骨架和孔道性质是当前研究的热点之一 [5].正是由于活性有机基团的存在 ,使得这些材料可直接用于催化反应 ,或作为中间介质成为其它络合离子的主体 .由于有机基…     

Aminopyrene functionalized mesoporous silica for the selective determination of resorcinol

Aminopyrene was convalently anchored onto the surface of mesoporous MCM-41 silica by post-grafting. This organic-inorganic hybrid has been applied as sensing material to phenols determination. Experimental results reveal that the functionalized material presents good sensitivity and selectivity towards resorcinol and can be used for resorcinol determination in water at pH 6.0. The fluorescence intensity of aminopyrene functionalized mesoporous silica decreases proportionally to the logarithm of resorcinol concentration in water. The linear range for resorcinol detection lies in 4.79-163 μM with a detection limit of 2.86 μM (S/N = 3).     

介孔分子筛的制备与苯加氢反应的催化性能

1992年美国Mobil公司的研究人员首次报道合成出具有规则孔结构的M41S系列介孔分子筛材料.由于介孔材料独特的性质,引起了人们极大的兴趣,在其合成与性能等方面进行了大量的研究,合成出了多种系列不同性能的介孔分子筛,并研究了介孔分子筛作为催化剂或催化剂载体在各类催化反应中的催化性能.     

Synthesis of hollow spherical silica with MCM-41 mesoporous structure

Hollow spherical mesoporous silica was synthesized by using sodium silicate as a precursor and a low concentration of cetyltrimethylammonium bromide (CTAB) (0.154 mol dm^–3). The resulting hollow spherical particles were characterized with scanning electron microcopy (SEM), small-angle X-ray diffraction (SXRD), transmission electron microscopy (TEM), and N₂ gas adsorption and desorption techniques. The results showed that regular spherical mesoporous silica could be obtained only if the molar ratio of propanol to CTAB was in the range of approximately 8:1–9:1. The spherical particles were hollow (inside), and the shell consisted of smaller particles with a pore structure of hexagonal symmetry. With an increase of the molar ratio of propanol to CTAB, the distance (a value) between centers of two adjacent pores increased, and the pore structure of mesoporous silica became less ordered. N₂ adsorption–desorption curves revealed type IV isotherms and H1 hysteresis loops; with an increase of the molar ratio of propanol to CTAB, the pore size with Barrett–Joyner–Halenda (BJH) diameter of the most probable distribution decreased, but the half peak width of the pore size distribution peak increased     

Preparation and application of Ce-doped mesoporous TiO2oxide

Summary Mesoporous TiO₂-CeO₂mixed oxides (m-TiO₂-CeO₂) were synthesized under easy-operating neutral conditions. The structure was characterized by means of FT-IR, XRD, and N₂adsorption methods. For methanol decomposition to CO and H₂, the catalytic activity of the Ru/ m-TiO₂-CeO₂ catalyst was higher than that of the Ru/ m-TiO₂.</o:p>     

用双表面活性剂为共模板合成中孔分子筛MCM-48

利用水热法以非离子表面活性剂聚乙二醇辛基苯基醚和阳离子表面活性剂十六烷基三甲基溴化铵为共模板合成了中孔分子筛MCM-48.实验中发现利用较强的范德华力和氢键,聚乙二醇辛基苯基醚可在很大程度上降低合成MCM-48所需阳离子表面活性剂的用量,且利于制备有序性好、骨架聚合度高、稳定性好的MCM-48.通过调节聚乙二醇辛基苯基醚与十六烷基三甲基溴化铵的比例,可得到不同物相结构的分子筛.     

Synthesis and characterization of MCM-48 tubular membranes

MCM-48 membranes have been prepared on alumina supports of different pore sizes. A battery of characterization techniques has been used to study the physical properties and the quality of the membranes prepared. The highest quality membranes were prepared on supports with pore size of up to 60 nm. The MCM-48 membranes were tested in the separation of gas phase mixtures and a cyclohexane/O₂ selectivity higher than 270 was obtained. The selective separation of organic compounds from inert components is a result of the cooperative effects of capillary condensation in MCM-48 pores and of the specific interactions of the permeating compounds and the membrane material.