槽道纤维悬浮流稳定性的实验研究

对槽道纤维悬浮流进行染色线流动显示和流场PIV实验测量,实验中选用的是直径为20μm、长径比为20～100的尼龙纤维。PIV2100处理器被用来加工处理采集的实验数据。槽道长度1.5m,横截面为矩形,尺寸为105×19mm。实验结果说明在Reynolds数相同的情况下,纤维悬浮流比对应的牛顿流更不容易失稳,悬浮流中的纤维起着抑制流场失稳的作用,而且随着纤维体积分数和长径比的增大,抑制失稳的程度也提高。扰动衰减率的最小值随纤维体积分数和长径比的增加而增大,这一效果在大Re数时更明显。     

静电纺丝法制备PLLA/g-HNTs复合纳米纤维膜及其性能研究

以辛酸亚锡为催化剂,利用HNTs表面的羟基引发L-LA开环聚合,合成了表面接枝聚(L-乳酸)(PLLA)链段的埃洛石纳米管(g-HNTs),通过红外、热失重和透射电镜对改性前后HNTs的组成与形貌进行了观察;然后采用静电纺丝技术制备了PLLA纳米纤维膜以及不同组成的PLLA/HNTs和PLLA/g-HNTs复合纳米纤维膜,探讨了纺丝条件对纳米纤维膜形貌的影响,并对复合膜的组成、形貌、力学性能和细胞相容性进行了研究.结果表明,当HNTs与L-LA的摩尔投料比为1∶10时,g-HNTs表面PLLA链段的接枝率为14.22％,HNTs纳米管的形态在接枝后变化不大,易于在无水乙醇中分散.电压强度和进样速率对纤维膜的形貌有一定影响,当电压强度为15 kV、进样速率为1 mL/h时,电纺纤维的直径较为均匀.复合纤维膜中g-HNTs在基体PLLA中的分散性以及与基体的界面相容性要优于相应的HNTs,当g-HNTs含量高达40％时,复合纳米纤维膜中的纤维形态仍然保持较好,可以得到连续、粗细较均匀的纤维;随着HNTs和g-HNTs含量增加,复合纳米纤维膜的拉伸强度和模量先增大后下降,当HNTs和g-HNTs的含量为5％时,两种复合纳米纤维膜的拉伸强度和模量均达到最大值,但PLLA/g-HNTs组复合纳米纤维膜的拉伸强度始终大于相应的PLLA/HNTs组.体外3T3细胞培养结果显示,PLLA/g-HNTs复合纳米纤维膜具有良好的细胞相容性,且优于相应的PLLA和PLLA/HNTs纳米纤维膜.     

静电纺空气过滤用PET/CTS抗菌复合纳米纤维膜的制备

采用静电纺丝法制备PET/CTS复合纳米纤维膜,并在纤维膜表面吸附一层纳米银,进一步增加纤维膜的抗菌性能.以扫描电镜(SEM)对不同配比PET/CTS所制备的纤维膜的微观形貌进行表征,结果显示w(CTS)/w(PET)为12.5%时,纤维形貌较好,平均直径为405 nm.分别对不同厚度的PET/CTS纤维膜进行力学性能、透气性能以及空气过滤性能测试,结果表明纺丝时间为7 h时,纤维膜具有较好的性能,其弹性模量为48.15 MPa、断裂伸长率183.30%、拉伸断裂应力2.11 MPa、拉伸强度2.49 MPa、拉伸屈服应力1.23 MPa、最大力1.38 N,阻气值为3.99 k Pa·S/m,过滤效率为99.55%,压降为621.32 Pa.吸附银离子实验表明,最佳GA交联浴配比为GA(vol%)=3.5%.紫外可见光谱(UV)及透射电镜(TEM)表征证明,有10 nm左右纳米银生成.抑菌实验表明,载银PET/CTS复合纳米纤维膜对金黄色葡萄球菌(S.a.)和大肠杆菌(E.coli.)的杀菌率分别为99.97%和99.99%.     

高分散钴氮共掺杂碳纳米纤维氧还原催化剂

过渡金属氮掺杂碳基催化剂已成为替代铂基氧还原反应(ORR)电催化剂的理想选择。本文通过静电纺丝技术制备了高比表面、高度分散的钴原子配位氮掺杂的碳纳米纤维催化剂(Co-N/C)。X射线衍射(XRD)和高分辨率透射电镜(HRTEM)结果证实Co元素高度分散于制备的Co-N/C催化剂中。X射线光电子能谱结果表明N元素主要以吡啶N和石墨N形式存在。该Co-N/C催化剂对ORR反应呈现出较高的电催化活性,其氧还原起始和半波电位分别为0.92 V和0.80 V(相对于标准氢电极),接近于商业化Pt/C催化剂的性能。以制备的Co-N/C催化剂作为阴极,25℃下锌空气燃料电池的开路电位1.54 V、最大功率密度达到了190 m V·cm~(-2)表明该催化剂具有良好的应用前景。     

PREPARATION AND CHARACTERIZATION OF SUPERPARAMAGNETIC FUNCTIONAL POLYMERIC MICROPARTICLES

Superparamagnetic poly(styrene-divinylbenzene-glycidyl methacrylate) (Pst-DVB-GMA) microparticles were prepared via a modified suspension polymerization process. A magnetic fluid was first prepared by a chemical co-precipitation method. Then magnetic microparticles were produced by mixing the monomers and the magnetic fluid with water in the presence of a stabilizer poly(vinyl pyrrolidone) (PVP) to form a suspension, and finally benzoyl peroxide was added to initiate the co-polymerization. The morphology and magnetic properties of the microparticles were examined by TEM and VSM. The spherically shaped microparticles, with a size range of 4 to 7 pm, showed distinct superparamagnetic characteristics. XRD was used to investigate the structure of the magnetite particles dispersed in the polymer matrix. The microparticles with epoxy groups on their surface can be applied directly to the seoaration of biomolecules.     

Dynamic characteristic analysis of a 3-D semi-submerged body as a fluid-structure interaction system

An Arnoldi‘s method with new iteration pattern, which was designed for solving a large unsymmetric eigenvalue problem introduced by displacement-pressure FE (Finite Element) pattern of a fluid-structure interaction system, was adopted here to get the dynamic characteristics of the semi-submerged body. The new iteration pattern could be used efficiently to obtain the Arnoldi‘s vectors in the shift-frequency technique, which was used for the zero-frequency problem. Numerical example showed that the fluid-structure interaction is one of the important factors to the dynamic characteristics of large semi-submerged thin-walled structures.     

浓悬浮体的屈服应力和最大填充率

对剪切稀化的浓悬浮体，假设在剪切状态下结构参数变化的速率服从一级动力学关系，在此基础上导出浓悬浮体最大填充率与剪应力、屈服应力与填充率之间关系的数学模型．用硅粉－甘油水溶液及可可粉－可可脂两种悬浮体的实验确认了模型对工业微米级颗粒悬浮体的适用性     

NUMERICAL SIMULATION WITH A COMPREHENSIVE CHEMICAL TRANSPORT MODEL OF NITRATE, SULFATE, AND AMMONIUM AEROSOL DISTRIBUTIONS OVER EAST ASIA

The transport and chemical production processes of nitrate, sulfate, and ammonium aerosols over East Asia were investigated by use of the Models-3 Community Multi-scale Air Quality （CMAQ） modeling system coupled with the Regional Atmospheric Modeling System （RAMS）. For the evaluation of the model＇s ability in depicting their 3-dimensional concentration distributions and temporal variations, modeled concentrations of nitrate, sulfate, and ammonium aerosols are compared with the observations obtained at a ground station in Japan in March 2001 and onboard of an aircraft DC-8 on 18 and 21 March 2001 during the Transport and Chemical Evolution over the Pacific （TRACE-P） field campaign. Comparison shows that simulated values of nitrate, sulfate, and ammonium aerosols are generally in good agreement with their observed data, and the model captures most important observed features, and reproduces temporal and spatial variations of nitrate, sulfate, and ammonium aerosol concentrations reasonably well, e.g., the timing and locations of the concentration spikes of nitrate, sulfate, and ammonium aerosols are well reproduced, but large discrepancies between observed and simulated values are also clearly seen at some points and some times due to the coarse grid resolution and uncertainties of the emissions used in this study. This comparison results indicate that CMAQ is able to simulate the distributions of nitrate, sulfate, and ammonium aerosols and their related species in the troposphere over East Asia reasonably well.     

电流变学研究进展

电流变学是近年来新兴的一门学科。本文从电流变学的发展概况，电流变流体，电流变效应的机理和电流变体的应用等４个方面对电流变学的概貌做了阐述，力求能准确地反映国际上电流变学的发展现状。     

多孔碳纳米纤维负载Pd纳米颗粒用于增强电催化氧还原性能

采用溶剂热法合成了以锆为金属核心、2-氨基为配体的锆基金属有机骨架（UiO-66）纳米材料,通过静电纺丝技术制备出UiO-66自由分散的聚丙烯腈（PAN/UiO-66）纤维,可控热解得到多孔碳纳米纤维（porous carbon nanofibers,PCNFs）,结合湿化学还原法在PCNFs表面沉积Pd纳米颗粒,得到PCNFs@Pd复合材料。通过扫描电子显微镜、透射电子显微镜、X射线衍射技术对其形貌、组成、结构进行表征;采用电化学工作站分别测试了PCNFs@Pd在0.1 mol·L^-1 KOH和0.1 mol·L^-1 HClO₄电解质中氧还原性能（oxygen reduction reaction,ORR）。结果表明,在PAN纤维中添加UiO-66显著提高了PCNFs@Pd（Pd负载量为0.34%）复合材料的ORR性能。相比40% Pt/C,在碱性电解质中,PCNFs@Pd复合材料展示出更低的Tafel斜率、更优异的循环稳定性和耐甲醇中毒性。在酸性电解质中也表现出类似20% Pt/C的催化活性和循环稳定性。