壳寡糖与镧、铈配合物的合成、表征及应用

合成了壳寡糖，镧和壳寡糖，铈配合物，用红外光谱和紫外光谱进行了表征，并证实了氮，金属(N-M)键的形成，元素分析证实配合物中各元素C：H：N：La或Ce的原子个数比分别接近于24：44：4：1，即相当于配位数为4。壳寡糖一镧和壳寡糖一铈较未配位的镧或铈具有更强的催化氧化能力。配合物除去废液中磷[(PO)^3-4]的效果比未配位的镧和铈提高10％。配合物可提高蔬菜、水稻种子的发芽率，促进作物的营养生长，提高水稻产量3，3％，提高黄瓜产量12％～15％，对十字花科蔬菜的病毒有一定的抑制作用。     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

Effects of Cone Angles on Nonlinear Vibration Responses of Functionally Graded Shells北大核心CSCD

The nonlinear vibration responses of functionally graded materials (FGMs) shells with different cone angles under external loads were studied. Firstly, the Voigt model was employed to describe the physical properties along the thickness direction of FGMs conical shells. Then, the motion equations were derived based on the 1st-order shear deformation theory, the von Kármán geometric nonlinearity and Hamilton’s principle. Next, the Galerkin method was applied to discretize the motion equations and the governing equations were simplified into a 1DOF nonlinear vibration differential equation under Volmir’s assumption. Finally, the nonlinear motion equations were solved with the harmonic balance method and the Runge-Kutta method, and the amplitude frequency response characteristic curves of the FGMs conical shells were obtained. The effects of different material distribution functions and different ceramic volume fraction exponents on the amplitude frequency response curves of conical shells were discussed. The bifurcation diagrams of conical shells with different cone angles, as well as time process diagrams and phase diagrams for different excitation amplitudes, were described. The motion characteristics were characterized by Poincaré maps. The results show that, the FGMs conical shells present the nonlinear characteristics of hardening springs. The chaotic motions of the FGMs conical shells are restrained and not prone to motion instability with the increase of the cone angle. The FGMs conical shell present a process from the periodic motion to the multi-periodic motion and then to chaos with the increase of the excitation amplitude. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

基于简化的应变梯度理论下Kirchhoff板模型边值问题的提法及其应用北大核心CSCD

考虑应变梯度和速度梯度的影响,建立薄板控制微分方程及给出其边值问题的提法,修正了前人给出的薄板角点条件.采用Levy法,给出受分布力作用下简支板的挠度及自由振动频率的解析解.通过与文献中分子动力学数据对比,验证了该文模型的有效性并提出校核材料参数的一种方法.研究结果表明,增大弹性地基和应变梯度参数可以有效提高板的等效刚度,而速度梯度参数则相反.该文提出的板的边值问题为研究薄板在复杂支撑边界及外荷载等条件提供了理论依据.同时,有望为其有限元法、有限差分法和基于能量原理的Galerkin法等数值方法提供理论依据.     

亮氨酸与异亮氨酸在金/银核-壳复合纳米粒子上的吸附状态

The Raman spectra and Surface enhanced Raman spectra (SERS) of leucine and isoleucine adsorbed on core-shell Au/Ag nanoparticles were obtained and assigned, and the different Raman peaks resulting from different vibrational models of the isomers忆groups were analysed. In Raman spectra, the leucine’s (ω(CH3)) is at 962, 945, 924 cm-1, (δas(CH3)) at 1408, 1454 cm-1; corresponding values for isoleucine are, 922 cm-1 and 1448, 1420, 1394 cm-1, respectwely. The difference in the peak positions of corresponding groups between leucine and isoleucine is more apparent in the SERS at acidic and basic conditions. The relationship between leucine and isoleucine’s concentration and SERS was interpreted preliminarily and the adsorption model on the core-shell Au/Ag nanoparticle surface was speculated.     

~(13)C代谢通量分析

代谢通量分析(metabolic flux analysis,MFA)是通过确定代谢网络中代谢流分布来表征细胞代谢状态的强有力的工具。鉴于计量学代谢通量分析在处理复杂代谢网络时表现出的局限性,发展了以13C标记实验为基础的13C MFA。本文介绍了13C MFA的原理与方法,总结和评述了13C MFA在实验与数据分析方面的最新进展以及MFA在功能基因组研究中的重要地位,同时对代谢通量分析的发展前景进行了展望。     

Au和SiO2多壳结构的制备和表征

利用自组装技术和胶体还原化学, 制备出金纳米壳Au@SiO₂以及SiO₂包裹的金纳米壳SiO₂@Au@SiO₂; 去除SiO₂@Au@SiO₂颗粒中的金壳层, 获得含有可移动SiO₂核的空心壳H-SiO₂@M-SiO₂. 结果显示: SiO₂@Au@SiO₂复合颗粒表面光滑, 并保留了金壳的近红外吸收特性; 通过改变复合颗粒外层SiO₂厚度, 可以调节其等离激元共振峰的位置; 王水可以有效地去除SiO₂@Au@SiO₂中的金壳, 相应的等离激元共振峰消失.     

轻度交联环糊精聚合物包结诱导自组装胶束的研究

合成了含β-环糊精的多取代单体(GMA)x-CD,经自由基聚合得到轻度交联的或高度支化的聚合物P(GMA)x-CD;同时由自由基共聚得到含有金刚烷侧基的疏水聚合物PtBA-ADA.研究表明,他们可在碱性水中通过β-CD和ADA间的包结络合作用形成胶束.当改变聚合物浓度比时,胶束尺寸在150~300 nm范围变化.TEM和AFM研究表明胶束具有核壳结构,核为疏水PtBA-ADA,壳为亲水(GMA)x-CD.通过对胶束壳CD基的化学交联,将胶束结构进一步固定化.     

过氧化氢在乙酸均相体系中对壳聚糖的降解

为制备分子量较低的可溶于水的壳低聚糖,研究了在乙酸均相体系中过氧化氢氧化降解壳聚糖的过程,采用凝胶渗透色谱法跟踪测定了壳聚糖氧化降解过程中分子量及其分布的变化,探索制备不同分子量壳低聚糖的适宜条件。     

反胶束法合成氧化锌微晶及其荧光特性

0引言材料的结构(微结构)、尺寸和形貌等因素对其特性及其实际应用具有重要的影响。对无机材料特别是氧化物半导体进行结构控制的研究近年来引起了人们极大的关注。氧化锌作为一种宽带隙(3.2eV)半导体材料,可广泛应用于压电材料、气体传感器、橡胶添加剂和光学器件等领域,而且还因其在室温下可产生激射现象使其成为纳米光学材料研究领域中的一大热点[1￣6]。目前,除了传统的固相-气相(V S)反应外,用于氧化锌微晶的制备方法主要有共沉淀法[7]、多羟基化合物水解法[8]、有机金属气相沉积法[9￣12]和水热法[13]等。通过选择不同的制备方法和…