单脉冲和多脉冲飞秒激光对单层光学薄膜的损伤

 利用掺钛的蓝宝石飞秒激光系统输出的单脉冲和多脉冲飞秒激光(中心波长800 nm，脉宽50 fs，靶面聚焦直径Ф 40 μm)，分别对BK7玻璃基底上厚约500 nm的单层HfO₂和单层ZrO₂薄膜进行辐照，得到了这两种薄膜在1-on-1和1 000-on-1测试方法下的激光损伤阈值。实验发现，两种方法下HfO₂单层膜的阈值均比ZrO₂单层膜的阈值高。从简化的Keldysh多光子离化理论出发，认为HfO₂薄膜材料的带比ZrO₂的宽是导致上述结果的主要原因。同时，同一种薄膜的多脉冲下的阈值比单脉冲下的低，原因是多脉冲下，飞秒激光对光学薄膜的损伤存在累积效应。     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

混合曲率曲面变形方程的Tricomi问题——Ⅱ.解的存在性

本文在很弱的条件下,证明对混合曲率曲面无穷小变形方程的Tricomi问题,存在L₂弱解和H₁强解。     

血卟啉衍生物（photofrin Ⅱ）对DNA的光敏损伤...：^31P核磁共振波谱的研究

本文用~(31)P核磁共振技术研究在光敏药物Photofrin Ⅱ作用下,DNA分子光敏损伤过程中的构象变化,损伤程度以及该药物与DNA分子可能的结合方式。     

激光散斑法对预制缺口岩石的缝端微裂区变形过程研究

本文应用激光散斑法对预制缺口岩石的缝端微裂区进行了无接触位移测量,求得加裁点位移 d 和缝端张开位移η.通过对主裂缝的跟踪量测,表明该试件的裂缝在失稳前存在着亚临界扩展.在此阶段,预制裂缝缝端主裂缝的形式推测主要是类似“啮合”裂缝及部分张开裂缝,当缝端张开位移达到临界值时,荷载稍增,裂缝即快速扩展,以致发生断裂.     

二元光学波面变形器件的研究

基于计算全息原理设计了二元光学波面变形器件，一块二元光学器件的衍射效率比计算全息可提高４倍，高斯波面整形需要二块整形光学器件，二元光学器件的激光利用率比计算全息提高１６倍，而且制做工艺简单．     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

弱刚度件加固装夹技术

弱刚度件通过加固装夹可以提高刚度，实现其少无变形装夹；薄球壳利用加固装夹方法可以解决加工变形问题。     

求解非对称线性方程组的QMRGCGS方法

1 引言 求解非对称线性方程组Ax=b的双共轭梯度方法(BCG)[3]和它的变形共轭梯度平方方法(CGS)[6]都有典型的不规则收敛行为,后来Freund和Nachtigal提出一种BCG类方法,即拟极小剩余方法(QMR)[7],用来补救BCG方法的收敛性并且产生了光滑的收敛曲线。然而,象BCG方法一样,QMR方法要用到系数矩阵A及其转置A~T与向量的乘积,为了解决这一问题,Freund提出TFQMR方法,此方法具有拟极小剩余性,同时不需用到A~T与向量的乘积。