Growth of ramification-like ZnO rods in the presence of polyaniline

To obtain new materials with synergetic or complementary behaviors, polyaniline composite filled with ZnO rods in ramification-like structure was prepared by a hydrothermal approach. Comparative experiments of ZnO preparation in the presence of some metal ions were also carried out. The results indicated that the morphology of ZnO was strongly affected by the preparation condition. The method to grow ZnO rods in the presence of polyaniline offers a simple approach to obtain polyaniline composite filled with linear ZnO structure. The results of X-ray photoelectron spectroscopy show that the strong interaction between ZnO and polyaniline possibly exists to cause the charge transfer.     

声表面波器件用〈110〉取向ZnO薄膜的MOCVD生长

Zn O是具有纤锌矿晶体结构的多功能半导体材料 ,它具有 3 .3 7e V的禁带宽度和高达 60 me V的激子束缚能 ,是很有希望的紫外发光材料 .由于具有 c轴的择优取向性 ,因此目前人们的注意力主要集中在对 c轴取向 Zn O薄膜的特性研究上 [1～ 3] .但其它取向的 Zn O薄膜也可在某些衬底的特定面上 ,通过特定的条件进行生长 ,如〈1 1 0〉取向的 Zn O薄膜可在特定的条件下生长在蓝宝石 R面衬底上[4～ 7] .由于 (1 1 0 )面的 Zn O薄膜具有一些 c轴取向薄膜所不具备或无法比拟的特性 ,如 :机电耦合系数高达6% (C面薄膜的机电耦合系数却不足 1 % )…     

高能Zn离子注入CaF2基质形成ZnO纳米粒子的机制、构型及电子结构

将高能Zn2+注入到CaF2介电基质中,在CaF2的表面下注入Zn2+浓度呈近似高斯分布,通过氧气氛后经热退火形成ZnO量子点.采用MaterialsStudio和Gaussian98W程序,结合实验结果计算分析了CaF2基质中ZnO纳米粒子的电子结构和光学性质.选取由4个ZnO原胞组成的超晶胞模型计算了ZnO纳米粒子的吸收光谱,理论结果与实验结果相符.对ZnO纳米粒子电子结构的研究结果表明,ZnO纳米粒子与CaF2基质的相互作用主要是ZnO表面的O与基质中Ca之间的作用,这种作用使ZnO纳米晶体的Fermi能级变窄,带隙相应减小;ZnO纳米粒子表面构型的变化对其本征吸收光谱没有影响,理论计算结果与实验值一致.     

PTh / ZnO复合纳米粉的固相合成及其光谱特性

0引言导电聚合物/无机物纳米复合材料具有纳米材料和导电聚合物的共同特性,因此在电催化、二次充电电池材料、超级电容器材料等方面具有良好的应用前景[1]。聚噻吩(PTh)以及取代聚噻吩是导电聚合物领域中较早发现的具有环境稳定性和可加工性的材料之一。近年来,有关聚噻吩/无机物纳米复合材料的制备及其光电性能的研究倍受关注,Gebeyehu等[2]用PTh敏化纳米晶TiO2光伏电池,发现其光伏效率明显优于固态光伏电池;Jayant等[3]研究了PTh中的羧基基团的影响以及在纳米晶TiO2     

ZnO纳米线的电化学制备研究

High-quality ZnO nanowires have been synthesized at relatively low temperature via one-step electrochemical anodization technique. In this method, Zn sheet acted as the anode and Pb sheet served as the counter electrode, and the complex solution of HF-C₂H₅OH-H₂O was used as electrolyte. ZnO nanowires were characterized by Field Emission Scanning Electron Microscopy (FE-SEM), Transmission Electron Microscopy (TEM) and Selected Area Electron Diffraction (SAED) and X-ray Diffraction (XRD). The results show that the nanowires were wurtzite crystalline ZnO, and the ZnO nanowires with the diameters of 70 nm and 30～40 nm were obtained by adjusting preparation conditions, respectively.     

氧化锌薄膜的电化学沉积和表征

以透明导电玻璃(TCO)为衬底，用硝酸锌水溶液作为电解液，研究了阴极还原沉积ZnO薄膜的反应机理和电化学行为. 通过改变工艺条件来控制ZnO的生长速率， 得到了粒径为10～15 nm的纳米ZnO薄膜. XRD分析显示纳米ZnO薄膜纯度高， 呈纤锌矿结构. 光学测试结果表明，在可见光区其透光度高达90%，禁带宽度为3.37 eV.     

Preparation of ZnO Nanoparticles: Structural Study of the Molecular Precursor

The structure of zinc acetate derived precursor currently used in the sol-gel synthesis of ZnO nanoparticles is described. The reaction products obtained before and after reflux of ethanolic zinc acetate solution have been studied by UV-Vis, photoluminescence, FTIR and EXAFS at the Zn K edge. EXAFS results evidence for both precursor solutions a change from the octahedral coordination sphere of oxygen atoms characteristic of the solid zinc acetate dihydrate compound into a four-fold environment. The EXAFS spectra of precursor solutions can be satisfactorily reproduced using the molecular structure reported for Zn₄O(Ac)₆ (Ac = COOCH₃). UV-Vis and FTIR measurements are also in agreement with the formation of this oligomeric precursor. The structural modification is more pronounced after reflux at 80°C, because the increase of the Zn₄O(Ac)₆ amount and the formation of nearly 3.0 nm sized ZnO nanoparticle.     

一种制备大量氧化锌纳米管的简单方法(英)

ZnO nanotubes were synthesized in large scale by thermal decomposition of the precursors obtained via chemical reaction between Zn(CH₃COO)₂·2H₂O and NaHCO₃ in the presence of surfactant sodium dodecyl sulfate (SDS). The inner diameters of the tubes were in the range of 80～100 nm, and outer diameters in the range of 160～260 nm with lengths up to a few micrometers. The products were characterized with XRD, TEM, and SEM.     

高分子自组装ZnO纳米带合成过程的研究

ZnO nanobelts were synthesized from zinc acetate (Zn(CH₃COO)₂) and polyvinyl alcohol(PVA) at about 300 ℃, 400 ℃, and 550 ℃. The products were characterized by scanning electron microscope(SEM) and transmission electron microscope(TEM). The ZnO nanobelts were typically 10～30 μm in length and 30～8 000 nm in width. The results show that the ZnO Y-nanobelts were formed owing to dislocation structure. The thermal treatment of 120 ℃ and enough time for growth of the crystal are essential to ZnO nanobelts synthesis.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.