Site‐Selective CH Borylation of Quinolines at the C8 Position Catalyzed by a Silica‐Supported Phosphane–Iridium System

Site‐selective C? H borylation of quinoline derivatives at the C8 position has been achieved by using a heterogeneous Ir catalyst system based on a silica‐supported cage‐type monophosphane ligand SMAP. The efficient synthesis of a corticotropin‐releasing factor₁ (CRF₁) receptor antagonist based on a late‐stage C? H borylation strategy demonstrates the utility of the C8 borylation reaction.     

Synthesis and characterization of fluorine functionalized graphene oxide dispersed quinoline-based polyimide composites having low-k and UV shielding properties

Polyimide nanocomposites having low-k and UV shielding properties have been developed using fluorine functionalized graphene oxide and bis(quinoline amine) based polyimide. The polyimide was synthesized using bis(quinoline amine) and pyromellitic dianhydride at appropriate experimental conditions, and its molecular structure was confirmed through various spectral analysis such as FTIR and NMR. The polyimide (PI) composites were prepared using bis(quinoline amine), pyromellitic dianhydride, and separately filled with 1, 5, 10 wt% of fluorinated graphene oxide (FGO) through in situ polymerization. The polymer composites were characterized using thermo gravimetric analysis (TGA), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM). In addition, the water contact angle, dielectric behavior, and UV–Vis shielding behavior of FGO/PI composites were evaluated. The value of the water contact angle of the polyimide was increased with increment of FGO in the polyimide matrix. The highest water contact angle of polyimide composites observed 108° was obtained for 15 wt% FGO reinforced polyimide composite. The value of the dielectric constant for neat, 1, 5, and 15 wt% FGO reinforced polyimide composites was obtained as 4.5, 3.7, 2.6, and 2.0, respectively. It is also observed from by UV–Vis spectroscopy analysis that the FGO reinforced polyimide composites have good UV shielding behavior.     

两种红光铱配合物的合成和电致发光性能研究

以二(二苯基磷酰)胺(Htpip)作为辅助配体,与主配体2-(2,4-二氟苯基)异喹啉和2-(4-三氟甲基苯基)异喹啉合成了红光铱磷光配合物Ir(dfpiq)2tpip和Ir(tfmpiq)2tpip并得到了晶体结构。在CH2Cl2中发射光谱主要是MLCT发射,峰位置分别为622和600 nm,量子效率分别为15%和17%,而HOMO/LUMO能级分别是-4.80/-2.58和-4.73/-2.57 eV。在1150~1300(V·cm-1)1/2电场范围,Ir(dfpiq)2tpip的电子迁移率为6.61~8.49×10-6cm2·V-1·s-1,Ir(tfmpiq)2tpip的电子迁移率为6.08~6.61×10-6cm2·V-1·s-1。ITO/TAPC(60 nm)/Ir-complex(15wt%):CBP(50 nm)/TPBi(60 nm)/LiF(1 nm)/Al(100 nm)中基于Ir(dfpiq)2tpip的器件最大安培效率和功率效率分别为4.71 cd·A-1和1.82 lm·W-1,12.0 V时达到的最大亮度为18 195 cd·m-2。基于Ir(tfmpiq)2tpip的器件最大安培效率和功率效率分别为3.47 cd·A-1和1.51 lm·W-1,12.4 V时达到的最大亮度为14 676 cd·m-2。     

碳化终温对β-Mo2C催化喹啉加氢脱氮性能影响

以MoO_3为前驱物,CH_4/H_2为碳源,采用程序升温直接还原碳化法制备不同碳化终温(640、660、680、700和720℃)的碳化钼催化剂,通过XRD、N_2吸附-脱附、SEM、TEM、XPS和Raman表征研究碳化钼的物理性质和结构性质,并研究不同碳化终温碳化钼对喹啉加氢脱氮的催化性能。结果表明,不同碳化终温的碳化钼催化剂均为β-Mo_2C,碳化终温可显著改变碳化钼表面物种含量、平均孔径和介孔分布。碳化终温为680℃时,催化剂碳化程度较高,表面氧物种含量最低,表面C/Mo物质的量比最高,对应的催化活性也最佳,在340℃、4 MPa条件下,喹啉的转化率和脱氮率均高达99%以上,芳香族类化合物的选择性可达37.8%,显示出较低的芳环破坏性。表面组成尤其是表面氧对于β-Mo_2C上喹啉加氢脱氮反应途径的调控至关重要。     

深共融溶剂中合成2,4-二取代喹啉衍生物

在氯化胆碱和氯化锌组成的深共融溶剂中,以2-氨基苯乙酮和芳香炔烃为原料,通过环化偶联反应,合成了一系列2,4-二取代喹啉衍生物;当n(氯化胆碱)∶n(氯化锌)=1∶2,反应温度为80℃时,反应3 h即获得高达98%的产率.该方法无需额外添加催化剂,而且反应条件温和、操作简单、底物范围较广泛.     

Electrochemical synthesis of selenocyanated imidazo[1,5-a]quinolines under metal catalyst-and chemical oxidant-free conditions

Reported herein is the first example of electrochemical selenocyanation of imidazo[1,5-a]quinolines with KSeCN under metal catalyst-and chemical oxidant-free conditions.This sustainable strategy shows a broad scope and great compatibility with functional groups,and affords synthetically and biologically important selenocyanated imidazo[1,5-a]quinolines in good to excellent yields with cheap graphite and Ni plates as the electrodes.The gram-scale synthesis was also successfully conducted,which might demonstrate the potential value of this electrochemical protocol.     

气相色谱-质谱法测定纺织品中喹啉与异喹啉

建立了纺织品中喹啉和异喹啉的气相色谱-质谱检测方法。采用乙酸乙酯为溶剂,超声提取,经蒸发浓缩和定容后,以GC-MS测定。结果表明,喹啉和异喹啉在0.05～10.0 mg/L范围内线性良好(r0.999 0),回收率为82.0%～99.8%,相对标准偏差(n=6)为0.9%～3.8%;方法的定量下限为0.05 mg/kg。该方法灵敏度高、简便、高效、准确,可以满足纺织品中喹啉和异喹啉的检测需求。     

Facile syntheses of 7,9-dimethoxypyrrolo[3,2,1-ij]quinolin-6-ones

The activated dimethoxypyrrolo[3,2,1-ij]quinolin-6-one ring system was synthesized via two approaches, starting from an indole and quinolin-4-one, respectively. Subsequent demethylation led to both monohydroxy- and dihydroxypyrrolo[3,2,1-ij]quinolin-6-ones.     

Novel copper(II) heterochelate: synthesis,structural features and fluorescence studies

Fluorescence properties of four based derivatives [Aⁿ] (where n = 1–4) and their Cu(II) heterochelates of the type [Cu(Aⁿ)(CQ)(OH)]^?xH₂O {where A¹ = 3‐(2‐oxo‐2H‐chromen‐3‐yl)‐4H‐furo[3,2‐c]chromen‐4‐one, A² = 8‐methyl‐3‐(2‐oxo‐2H‐chromen‐3‐yl)‐4H‐furo[3,2‐c]chromen‐4‐one, A³ = 6‐methyl‐3‐(2‐oxo‐2H‐chromen‐3‐yl)‐4H‐furo[3,2‐c]chromen‐4‐one, A⁴ = 8‐chloro‐3‐(2‐oxo‐2H‐chromen‐3‐yl)‐4H‐furo[3,2‐c]chromen‐4‐one and x = 3, 2, 4, 1} were studied at room temperature. The fluorescence spectra of heterochelates show red shift, which may be due to the chelation by the ligands to the metal ion. It enhances ligand ability to accept electrons and decreases the electron transition energy. The kinetic parameters such as order of reaction (n), energy of activation (E_a), entropy (ΔS^#), pre‐exponential factor (A), enthalpy (ΔH^#) and Gibbs free energy (ΔG^#) have been reported. The antimicrobial activity of Clioquinol and Cu(II) heterochelates have been determined and described. All the heterochelates showed a more effective antimicrobial activity than the free ligand. Copyright © 2010 John Wiley & Sons, Ltd.