一种红光铱配合物的合成和电致发光性能

以1-(4-三氟甲基苯基)异喹啉(tfmpiq)为主配体,二(二(4-三氟甲基苯基)膦酰)胺(tfmtpip)为辅助配体,成功合成了Ir髥配合物Ir(tfmpiq)2(tfmtpip),并得到了配合物的晶体结构。配合物Ir(tfmpiq)2(tfmtpip)的分解温度为373℃,具有良好的热稳定性。Ir(tfmpiq)2(tfmtpip)的发射光谱主要是MLCT发射,峰位置为613 nm,量子效率为3.7%,HOMO和LUMO轨道能级分别为-5.62和-3.54 e V。基于Ir(tfmpiq)2(tfmtpip)的器件ITO/TAPC(40 nm)/Ir(tfmpiq)2(tfmtpip)(x%)∶mCP(20 nm)/TmPyPB(40 nm)/LiF(1 nm)/Al(100 nm),当掺杂浓度为4%(w/w)时,器件达到最大功率效率和电流效率分别为5.73 lm·W-1和7.13 cd·A-1,而且器件在12.8 V的驱动电压下达到亮度10 542 cd·m-2。     

两个磷光铱配合物的合成和性质研究

由于具有P=O键,二(二苯基膦酰)胺(tetraphenylimidodiphosphinate acid,Htpip)作为辅助配体引入Ir(III)配合物中,可以提高配合物的电子迁移率和器件的效率。采用氟取代的2-(4-氟苯基)吡啶(F4-ppy)为主配体、以Htpip和三氟甲基取代的Htfmtpip为辅助配体合成了2个铱配合物Ir(F4-ppy)2(tpip)和Ir(F4-ppy)2(tfmtpip)。晶体结构中Ir原子的配位几何构型均为八面体构型,Ir(F4-ppy)2(tpip)属于正交晶系Pbca空间群,而Ir(F4-ppy)2(tfmtpip)属于单斜晶系P21/c空间群。配合物都具有较好的热稳定性,Ir(F4-ppy)2(tpip)和Ir(F4-ppy)2(tfmtpip)的初始分解温度分别为385和395℃。配合物Ir(F4-ppy)2(tfmtpip)的氧化和还原峰较配合物Ir(F4-ppy)2(tpip)分别向正电压移动了大约0.134和0.12 V,相应的HOMO和LUMO能级分别降低了0.14和0.43 eV。在室温、1×10-5mol·L-1的CH2Cl2溶液中Ir(F4-ppy)2(tpip)和Ir(F4-ppy)2(tfmtpip)的最大磷光发射峰分别位于492和495 nm,量子效率分别为9.2%和16.4%。结果表明在辅助配体上引入4个三氟甲基后不仅可以提高配合物的热稳定性和电化学稳定性,并且可以调控配合物的HOMO/LUMO能级和发光效率。     

基于面式-三(2-(4-三氟甲基苯基)吡啶)合铱配合物为发光中心的高效绿光有机电致发光器件

用经典的方法合成了面式-三(2-(4-三氟甲基苯基)吡啶)合铱配合物(fac-Ir(tfmppy)3),并得到了其晶体结构。在CH2Cl2溶液中Ir(tfmppy)3的发射光谱显示出了峰值位于525 nm的π→π*跃迁吸收以及金属到配体电荷转移(MLCT)吸收,色坐标(CIE)为(0.31,0.62),量子效率计算为4.59%(以Ru(bpy)3]Cl2为参照)。以Ir(tfmppy)3为发光中心,制备并研究了有机电致发光器件:ITO/TAPC(60 nm)/Ir(tfmppy)3(x%)∶mCP(30 nm)/TPBi(60 nm)/LiF(1 nm)/Al(100 nm)。4%掺杂浓度的器件在4 197 cd·m-2的亮度下显示的最大电流效率为33.95 cd·A-1,在12.7 V时的最大亮度为43 612 cd·m-2,色坐标(CIE)为(0.31,0.61)。利用瞬态电致发光法(transient electroluminescence(TEL))、在1 300(V·cm-1)1/2的电场强度下Ir(tfmppy)3配合物的电子迁移率测定为4.24×10-6cm2·(V·s)-1。非常接近于常用的电子传输材料八羟基喹啉铝(Alq3)的电子迁移率。     

一种可旋涂的磷光铱(Ⅲ)配合物的合成及其在OLED器件中的性能

以1-(6-(9-咔唑基)己基)-2-苯基咪唑(Czhpi)为主配体,2-(5-(4-氟苯基)-1,3,4-三唑)吡啶(fpptz)为辅助配体,合成了一种溶解性好的可用于湿法旋涂制备有机电致发光器件的磷光铱(Ⅲ)配合物(Czhpi)2Ir(fpptz)。通过紫外-可见吸收光谱、发射光谱、低温磷光光谱及热重分析对其光物理性质和热稳定性进行了研究。将配合物(Czhpi)2Ir(fpptz)掺杂在1,3-二唑-9-基苯(mCP)中,作为发光层,经湿法旋涂制备了有机发光二极管器件。结果显示,该器件的最大电致发光谱峰位于523nm,最大电流效率约5.74cd·A-1,最大功率效率为2.88lm·W-1,色坐标显示在(0.31,0.41)附近。     

辅助配体对噌啉类铱配合物光电性能的影响

合成了2种新的噌啉类铱配合物(dpci)_2Ir(paz)和(dpci)_2Ir(taz)(dpci=3,4-二苯基噌啉,paz H=5-(2′-吡啶基)-3-三氟甲基-吡唑,taz H=5-(2′-吡啶基)-3-三氟甲基-1,2,4-三唑),通过核磁共振氢谱和氟谱及高分辨质谱对其结构进行了确定,同时对其光电性能进行了表征。结果表明在聚甲基丙烯酸甲酯(1%,w/w)中(dpci)_2Ir(paz)和(dpci)_2Ir(taz)的发光波长分别为616和612 nm,相对参比铱配合物(dpci)_2Ir(pic)的波长(625 nm)有了较大蓝移,发光量子效率也由16.1%提高到了51.9%和32.5%。改进辅助配体后,材料的稳定性明显提高,使其能用蒸镀法制备有机电致发光器件。基于(dpci)_2Ir(paz)的器件发光为纯红光,CIE色坐标为(0.66,0.34),最大亮度为2 054 cd·m~(-2),最大电流效率为8.5 cd·A~(-1)。基于(dpci)_2Ir(taz)的器件最大亮度为2 931 cd·m~(-2),最大电流效率为14.5 cd·A~(-1)。     

两种基于氮杂环结构铱(Ⅲ)配合物的合成及有机电致发光性能

以苯基嘧啶/吡啶基嘧啶为母核, 同时引入2个三氟甲基(CF₃)合成了2-[3,5-二（三氟甲基）苯基]-5-氟基嘧啶(tfmphfppm)和2-[2,6-二（三氟甲基）-4-吡啶基]-5-氟基嘧啶(tfmpyfppm)主配体, 并以2-(5-苯基-1,3,4-噁二唑-2-)苯酚(pop)为辅助配体合成了2种铱(III)配合物Ir(tfmphfppm)₂(pop)和Ir(tfmpyfppm)₂(pop), 其发射光谱峰分别位于484和504 nm, 分别属于蓝绿光和绿光发射, 发光量子效率分别达到76%和89%. 由于氮杂环和2,5-二苯基-1,3,4-噁二唑基团的存在, 配合物具有较低的最低未占据分子轨道(LUMO)能级和较高的电子迁移率. 以2种 铱(III)配合物为发光中心制备的有机电致发光器件(OLED)显示了较好的器件性能, 其最大亮度(L_max)、 最大电流效率(η_{c, max})、 最大功率效率(η_{p, max})和最大外量子效率(EQE_max)分别为33379 cd/m², 76.55 cd/A, 31.59 lm/W和26.7%; 并且该器件显示了比较小的效率滚降, 在亮度为1000 cd/m²时, 器件的η_c仍然可以达到72.71 cd/A. 本文结果表明, 氮杂环、 2,5-二苯基-1,3,4-噁二唑和三氟甲基基团可以有效提高铱(Ⅲ)配合物的发光性能和电子迁移率, 从而提高器件的性能.     

基于N-对甲氧苯基咔唑-2-乙烯基-8-羟基喹啉锌的白色和黄色有机电致发光器件的性能

通过研究新型荧光染料N-对甲氧苯基咔唑-2-乙烯基-8-羟基喹啉锌(MoBCzHQZn)的电致发光(EL)特性, 发现MoBCzHQZn具有较强的发光特性和空穴传输特性, 利用此特性制备了非掺杂型的有机电致白光器件和掺杂型的有机电致黄光器件. 白光器件的结构为ITO/2T-NATA(20 nm)/MoBCzHQZn(25 nm)/NPBX(13 nm)/BCP(8nm)/Alq3(34 nm)/LiF(0.5 nm)/Al, 器件在15 V电压下实现了白光发射, 色坐标为(0.3719, 0.3275), 最大发光亮度为3414 cd·m-2, 在14 V 电压下的最大发光效率为1.69 cd·A-1、黄光器件的结构为ITO/2T-NATA(20 nm)/CBP:6%Ir(ppy)3:10%MoBCzHQZn(25 nm)/TPBi:6%Ir(ppy)3(47 nm)/LiF(0.5 nm)/Al, 器件在15 V电压下实现了黄绿光发射, 色坐标为(0.3590, 0.5787), 最大发光亮度为11073 cd·m-2, 在9 V电压下的最大发光效率为2.51 cd·A-1.     

带烷氧基的苯基蒎烯吡啶铱配合物在聚合物电致发光器件中的应用研究

采用旋涂法将一组带烷氧基的苯基蒎烯吡啶铱(Ⅲ)配合物(Ir(RO-pppy)₃)磷光材料掺杂到PVK中,制作出了聚合物电致发光器件:ITO/PE-DOT:PSS(40 nm)/PVK_0.7:PBD_0.3:(x%.)Ir-complex(80 nm)/CsF(1.5 nm)/Mg:Ag(200 nm).实验结果表明,带有长烷氧基链配体的铱(Ⅲ)配合物能表现出更好的器件行为,当掺杂浓度为3.2%时,器件的最高发光效率达19.9 cd/A(7.8 lm/W,9.1V),CIE为(0.20,0.56);器件最大亮度为15700 cd/m²(8.4V).通过对这组铱(Ⅲ)配合物的光物理行为及电化学性能的研究,考察了主体材料与配合物之间的能级配置以及能量转移的机理.     

两个磷光铱配合物的合成和性质研究

由于具有P=O键,二（二苯基膦酰）胺（tetraphenylimidodiphosphinateacid,Htpip）作为辅助配体引入Ir（Ⅲ）配合物中,可以提高配合物的电子迁移率和器件的效率。采用氟取代的2-（4-氟苯基）吡啶（F₄-ppy）为主配体、以Htpip和三氟甲基取代的Htfmtpip为辅助配体合成了2个铱配合物Ir（F₄-ppy）₂（tpip）和Ir（F₄-ppy）₂（tfmtpip）。晶体结构中Ir原子的配位几何构型均为八面体构型,Ir（F₄-ppy）₂（tpip）属于正交晶系Pbca空间群,而Ir（F₄-ppy）₂（tfmtpip）属于单斜晶系P2₁/c空间群。配合物都具有较好的热稳定性,Ir（F₄-ppy）₂（tpip）和Ir（F₄-ppy）₂（tfmtpip）的初始分解温度分别为385和395℃。配合物Ir（F₄-ppy）₂（tfmtpip）的氧化和还原峰较配合物Ir（F₄-ppy）₂（tpip）分别向正电压移动了大约0.134和0.12V,相应的HOMO和LUMO能级分别降低了0.14和0.43eV。在室温、1×10^-5mol·L^-1的CH₂Cl₂溶液中Ir（F₄-ppy）₂（tpip）和Ir（F₄-ppy）₂（tfmtpip）的最大磷光发射峰分别位于492和495nm,量子效率分别为9.2%和16.4%。结果表明在辅助配体上引入4个三氟甲基后不仅可以提高配合物的热稳定性和电化学稳定性,并且可以调控配合物的HOMO/LUMO能级和发光效率。     

以1-苯基吡唑为主配体的红光Ir(III)配合物的合成及光电特性

合成了一种新型红色磷光配合物二(1-苯基咪唑) (1-苯基异喹啉)合铱((ppz)₂Ir(piq)), 通过核磁共振氢谱(¹H NMR)对其结构进行了表征, 通过紫外-可见(UV-Vis)吸收光谱、荧光光谱、低温磷光光谱、循环伏安法及含时密度泛函理论(TD-DFT)对其光物理性能及能级结构进行了研究. 制备了一系列基于(ppz)₂Ir(piq)的电致发光器件, 研究了(ppz)₂Ir(piq)的电致发光性质. 结果表明, (ppz)₂Ir(piq)的UV-Vis 吸收峰主要位于296、342、395 和460 nm, 固态粉末的室温磷光发射峰位于618 nm, 在2-甲基四氢呋喃(2-MeTHF)溶液中其低温磷光发射峰位于598 nm, 其三线态能级(E_T)为2.07 eV. (ppz)₂Ir(piq)的最高占据轨道(HOMO), 其主要定域于配体ppz 和金属Ir(III)上, 最低未占据轨道(LUMO)主要定域于配体piq 上. (ppz)₂Ir(piq)的HOMO和LUMO 能级分别为-5.92和-3.62 eV. 基于(ppz)₂Ir(piq)电致发光器件的优化掺杂浓度为8%-12% (w), 最大电致发光谱峰位于616 nm,最大电流效率约10 cd·A^-1, 最大功率效率为4.44 lm·W^-1, 色坐标保持在(0.65, 0.35)附近, 是一种潜在的饱和红光磷光材料.     

1-(2-噻唑)-3-(8-(5-对磺酸基苯基偶氮)喹啉)-三氮烯的合成及其与铜(Ⅱ)的显色反应

合成了新试剂1-(2-噻唑)-3-(8-(5-对磺酸基苯基偶氮)喹啉-三氮烯(TCPQT),并研究了其与Cu2+的显色反应。结果表明:在pH 7.5的磷酸盐缓冲溶液中,TCPQT与Cu2+形成摩尔比为1:1的紫红色络合物,该络合物在606.5nm处有一最大吸收峰,其表观摩尔吸光系数为3.36×105L.mol-1.cm-1,Cu2+的质量浓度在0～0.4μg/mL范围内符合比尔定律,相关系数r=0.9993。方法已用于测定食品中的微量铜。     

Synthesis, characterization and catalytic behavior toward ethylene of cobalt(II) and iron(II) complexes bearing 2-(1-aryliminoethylidene)quinolines

A series of 2-(1-aryliminoethylidene)quinolines (L) were synthesized and used as bidentate N^N ligands in coordinating with metal (cobalt and iron) chlorides to form complexes of the type LMCl₂, cobalt(II) (Co1-Co5) and iron(II) (Fe1-Fe5). All organic compounds and metal complexes were fully characterized, and the molecular structures of the representative complexes Co3·DMF and Fe4·DMF were confirmed as distorted bipyramidal geometry at the metal by single-crystal X-ray diffraction. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO) under 10 atm ethylene, all complexes showed high activities in ethylene dimerization with activities of up to 1.82 × 10⁶ g mol⁻¹ (Co) h⁻¹ and 5.89 × 10⁵ g mol⁻¹ (Fe) h⁻¹, respectively.     

Syntheses, Crystal Structures and Photoluminescence Properties of Cadmium(Ⅱ) and Nickel(Ⅱ) Complexes with 2-(2-Benzimidazolyl)quinoline

Two novel complexes, [Cd2(BMQU)2Cl4] (1) and [Ni(BMQU)2HPO4]·1.5H2O (2) (BMQU = 2-(2-benzimidazolyl)quinoline), were synthesized by the hydrothermal method and characterized by elemental analysis, IR, and TG-DTG. The crystal structures were determined by single-crystal X-ray diffraction. Both 1 and 2 crystallize in the triclinic system, space group P . The data for 1: a = 0.8342(7), b = 0.9226(9), c = 1.0646(8) nm, α = 90.819(2), β = 97.466(2), γ = 98.280(2)°. The Cd(Ⅱ) is coordinated with three chlorine atoms and two nitrogen atoms of a BMQU molecule, generating a distorted square-pyramidal geometry. The dinuclear Cd(Ⅱ) complex is formed by two chlorine bridge bonds, and the one-dimensional chain structure is constructed with the hydrogen bond N-H…Cl and π-π stacking interaction. The data for 2: a = 1.2251(1), b = 1.2451(1), c = 1.2868(1) nm, α = 107.510(2), β = 98.630(1), γ = 109.921(2)°. The Ni(Ⅱ) is coordinated with four nitrogen atoms of two BMQU molecules and two oxygen atoms of a HPO42-, forming a distorted-octahedral geometry. The two-dimensional layer structure is formed by the hydrogen bonds and π-π stacking interaction between neighboring molecules. Complex 1 shows a strong blue fluorescence emission (λmax= 456 nm) at solid state.     

铂(Ⅱ)与NPTSQ显色反应研究及应用

本文研究了新显色剂5-(对硝基苯偶氮)-8-(对甲苯磺酰氨基)喹啉(NPTSQ)与铂(Ⅱ)的显色反应。在强碱性介质中,NPTSQ与Pt(Ⅱ)形成1:2的紫蓝色络合物,λ_(max)=640nm,摩尔吸光系数为1.37×10~5L·mol~(-1)·cm~(-1)。铂量在0～25μg/25mL范围内遵守比尔定律。用于冶金氧化渣及铂催化剂中微量铂的测定,结果良好。     

2-(1-Aryliminoethylidene)quinolylnickel(II) dibromides: Synthesis, characterization and ethylene dimerization capability

A series of 2-(1-aryliminoethylidene)quinoline derivatives (L1-L9) and the nickel(II) dibromides (C1-C9) thereof, were synthesized and characterized. The molecular structures of C2 (R¹ = Et, R² = H, R = Me) and C9 (R¹ = ⁱPr, R² = H, R = ⁱPr) were confirmed as being distorted tetrahedral at nickel by single crystal X-ray diffraction. On treatment with diethylaluminium chloride (Et₂AlCl) or ethylaluminum sesquichloride (EASC), these nickel pre-catalysts exhibited high activity for selective ethylene dimerization (0.89-3.29 × 10⁶ g mol⁻¹(Ni) h⁻¹) at 20 °C under 10 atm of ethylene. The influence of the reaction parameters on the catalytic behaviour was investigated for these nickel systems, including variation of Al/Ni molar ratio and reaction temperature.     

Molecular Iodine as a Versatile Reagent for the Synthesis of Thiazoloquinoline—A Potential Antibacterial Agent

Abstract

A series of 3-(2-aminothiazol-4-yl)quinolin-2[1H]-ones 3 was prepared by neat reaction of quinolin-2[1H]-ones 1 with thioureas 2 in the presence of molecular iodine. The synthesized compounds were evaluated for their in vitro antimicrobial activities against Escherichia coli, Paedococcus sp., Lactobacillus, Yersinia enterocolitica, and Staphylococcus aureus. The green chemical approach for the synthesis of thiazoloquinolinone 3 was performed under neat conditions using molecular iodine as catalyst as well as reaction medium.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT      

Synthesis and spectroscopic characterization of new heteroleptic ruthenium(II) complexes incorporating 2-(2′-pyridyl)quinoxaline and 4-carboxy-2-(2′-pyridyl)quinoline

Starting from cis-[Ru(dcbpyH₂)₂Cl₂] (1), two new heteroleptic ruthenium(II) complexes, [Ru(dcbpyH₂)₂(L¹)](NO₃)₂ (L^1?=?2-(2′-pyridyl)quinoxaline (2), and [Ru(dcbpyH₂)₂(L²)](NO₃)₂ (L^2?=?4-carboxy-2-(2′-pyridyl)quinoline (4); dcbpyH_2?=?2,2′-bipyridine-4,4′-dicarboxylic acid), were synthesized and spectroscopically characterized. During the preparation of 2 and 4, the homoleptic [Ru(dcbpyH₂)₃]Cl₂ complex (3) was isolated as a side product. Characterization includes IR and Raman spectroscopy, UV-Vis, multinuclear NMR spectroscopy, elemental, and ESI-mass spectrometric analyses.     

2-Substituted 5-oxo-5,6,7,8-tetrahydroquinazolines

Twenty novel 2-substituted 5-oxo-5,6,7,8-tetrahydroquinazolines in reactions of 2-formyl-1,3-cyclohexanedione and its 5,5-dimethyl- and 5-phenyl derivatives with 4-chloro- and 4-carbonylaminobenzamidines, 3- and 4-carbamidinopyridines, 2-carbamidinopyrazine, 2-carbamidino-5-trifluoromethylpyridine, 1-carbamidinopyrrolidine, 4-carbamidinomorpholine, and 1-carbamidino-3,5-dimethylpyrazole have been obtained.Riga Technical University, Riga LV-1658, Latvia; e-mail: marina@osi.lv. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 212–26, February, 2000.     

2-乙烯基取代8-羟基喹啉衍生物的合成及其抗氧化活性研究

设计合成了2-[(2’-9H-芴-2-基)-乙烯基]-8-羟基喹啉(6)和2-[(2’-菲-9-基)-乙烯基]-8-羟基喹啉(7),通过IR、UV、1H NMR、MS和元素分析确认了其结构;并利用DPPH.方法、超氧阴离子自由基(O2.-)法、羟基自由基(OH.)法分别测定了目标产物的抗氧化活性。结果表明,这两种化合物对DPPH.、O 2.-和OH.都具有较强的抗氧化活性。     

Fluorescence Reaction of 5- (p-Methoxyphenylazo)-8-(p-tolylsulfonamido)quinoline with Cobalt(II) and Its Analytical Application

Abstract

5-(p-Methoxyphenylazo)-8-(p-tolylsulfonamido) quinoline(MTAQ) has been synthesized. The product was checked by IR, theroograviae-try, NMR and elemental analysis. A highly sensitive spectrofluorim-etric method has been developed for the determination of cobalt(II) based on the formation of a complex with MTAQ in slightly basic medium aqueous solution and In the presence of nonionic surfactant, tween-80. The complex shows two excitation maxima at 304 nm and 338 nm, its emission maximum is centred at 402 nm. The fluorescence intensity is proportional to cobalt(II) concentration in the range of 0-85 ppb. The method has good selectivity and has been applied to the direct fluorimetric determination of trace cobalt(II) in pig's liver, Dianchi shrimp and celery.