反相高效液相色谱法测定全血中马钱子碱和士的宁的含量

 建立了反相高效液相色谱法定量分析全血中马钱子碱和士的宁含量的方法。该方法应用Oasis  R ○ MCX固相萃取小柱进行提取、采用XTerra TM RP 18 色谱柱进行分离。在该条件下马钱子碱和士的宁的线性范围为0.05～10 mg/L ,最小检出限为0.15 ng。该方法测得马钱子碱和士的宁在低、中、高浓度下的回收率均在90%以上,日内、日间精密度均符合方法学要求。该方法灵敏、快速、准确,适用于临床血药浓度监测和法医毒化检验。     

基于氮化碳复合材料磁性固相萃取结合高效液相色谱法测定尿液中3种羟基多环芳烃

建立了测定尿液中3种羟基多环芳烃的氮化碳复合材料磁性固相萃取结合高效液相色谱-荧光检测法。所构筑的磁性氮化碳材料，经扫描电子显微镜、X射线衍射仪、振动样品磁强计和比表面积分析仪表征后，用于尿液中3种羟基多环芳烃的富集净化。考察了吸附剂用量、吸附时间、洗脱溶液和洗脱体积（单次洗脱体积×洗脱次数）对萃取效率的影响。结合高效液相色谱-荧光分析，在0.25~250 μg/L范围内线性关系良好（相关系数r=0.999），3种羟基多环芳烃的检出限和定量限分别为0.08和0.25 μg/L，回收率为90.1%~102%，日内和日间精密度分别为1.5%~7.7%和2.2%~8.7%。该本方法简单、快速、高效，可用于尿液中羟基多环芳烃的分析。     

PbO~2纳米粉体的固相合成及其对MnO~2电极材料的改性作用

利用固相氧化反应制备了PbO~2纳米粉体样品，借助XRD，TEM以及循环伏安测试对其性质进行了表征。同时，对反应条件的选择进行了讨论。将所得样品用于改性MnO~2电极，恒流放电测试结果表明，样品掺杂量在1.25%～5.00%间对MnO~2有良好的改性效果，可使改性MnO~2的放电容量得到极大提高。循环伏安测试结果表明，铅的掺入改变了MnO~2的放电机理。在循环扫描过程中，掺杂物与MnO~2均不再以单纯氧化物的形式存在，而是形成了一系列Pb(X)(X=0,Ⅱ)Mn(Y)(Y=Ⅳ，Ⅲ，Ⅱ)复合物的共氧化与共还原，抑制了电化学惰性物质Mn~3O~4的生成和积累，从而有望改善MnO~2的可充性能。纳米PbO~2与常粒径PbO~2与常粒径PbO~2(标记为S)对MnO~2的改性机理类似。但前者对MnO~2的改性效果明显优于后者，当恒流放电至-1.0V时，其放电容量较S样改性MnO~2的放电容量平均高出约30%。     

聚偏氟乙烯的氯化改性

研究了聚偏氟乙烯 (PVDF)自由基引发的氯化反应。考察了各种因素 ,如氯化剂、引发剂的种类及浓度 ,反应介质、反应温度和反应时间的影响 ,确定了合成氯化PVDF的最佳反应条件。采用碱熔法测定氯含量 ,用HNMR进行了结构表征 ,并用溶度参数法、接触角法、DTA TG等方法对PVDF氯化前后的溶解性、附着力、熔点等性能进行了测试。结果表明 ,氯原子成功地引入到了PVDF上 ,当氯含量增加到 8 3 %时 ,氯化PVDF的熔点由 1 63℃降至 1 3 0℃左右 ,附着力也有了明显的改善 ,与水的接触角由 90°降至 5 4°,由不溶于丙酮变为溶于丙酮 ,对甲醇和四氯化碳的溶度参数的变化也说明了氯化PVDF的溶解性能变好 ,由TG曲线可知 ,氯化PVDF的热稳定性比改性前虽有一定的降低 ,但其分解温度仍在 3 0 0℃以上     

Application of matrix solid-phase dispersion in the analysis of priority polycyclic aromatic hydrocarbons in fish samples

The performance of matrix solid-phase dispersion (MSPD) for the extraction of polycyclic aromatic hydrocarbons (PAHs) in fish tissue is described. The suitability of different solid supports was tested as well as the influence on the extraction efficiency of the natural fat content in samples. Under optimal conditions 0.6-0.8 g of tissue sample, are dispersed with 2 g of octadecylsiloxane (C18) and 0.5 g of anhydrous sodium sulphate and transferred to the top of a polyethylene solid-phase extraction cartridge which already contains 2 g of florisil and 1 g of C18. Cartridges were eluted with acetonitrile. The analysis of the extracts was carried out by high-performance liquid chromatography (HPLC) coupled with fluorescence detection. The proposed method provides detection limits between 0.04 and 0.32 ng/g for the different considered PAHs, below the maximum levels established by the some regulatory bodies for the six PAHs after recent oil spill episodes and European Union regulations. Recoveries over 80% were obtained for all compounds. Accuracy validation was carried out using the US National Institute of Standards and Technology (NIST) SRM 2977 reference material.     

纳米多孔双金属氧化物在镍钛合金纤维上的原位生长及其对多环芳烃的选择性固相微萃取

采用阳极氧化法在镍钛合金(NiTi)纤维上原位生长了双金属氧化物纳米孔(NiTiONPs)涂层,通过扫描电镜(SEM)和能谱(EDS)考察了电解质组成和电压对形貌的影响。将NiTiONPs涂层的NiTi纤维与高效液相色谱-紫外检测器联用,研究了4种典型芳香分析物的萃取性能。结果表明,富含TiO2的NiTiONPs涂层对多环芳烃(PAHs)具有良好的萃取效率,尤其对苯并[a]芘的萃取选择性优于市售聚二甲基硅氧烷纤维和聚丙烯酸酯纤维。在优化条件下,PAHs的线性范围为0.05~200μg/L,相关系数均大于0.999,检出限为0.012~0.134μg/L。对单支纤维日内和日间分析的相对标准偏差(RSDs)分别为4.0%~5.5%和6.0%~6.8%,使用分批组装的5支纤维分析的RSDs为6.4%~7.6%。实际水样分析的加标回收率为84.5%~111.5%。所制备NiTi纤维至少可重复使用250次以上,重现性好。     

Stereoselective effects in the solid-phase hydrogenation of unsaturatedl-hydroxyproline derivatives

The solid-phase catalytic hydrogenation of (R-4tert-butoxy-Δ¹-pyrroline-2-carboxylic) acid under the action of hydrogen spillover was studied. The reaction proceeds stereoselectively with the predominant formation of thel-amino acid. The configuration of the asymmetric center formed is determined by that of the asymmetric C(4) atom. The major portion of the isotope label is incorporated into the allylic C(3) and C(5) positions, and the β-H atoms are more mobile. Using quantum-chemical calculations, the geometric structure of thel-hydroxyproline molecule was calculated, and the spin-spin coupling constants for this tritium-labeled amino acid were determined. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1820–1823, October, 1997.     

氨基酸单取代酞菁锌的合成与表征

以单羧基β-取代酞菁锌和王氏氨基树脂为原料,合成了2种氨基酸单取代酞菁锌:2-L-苯丙氨酸-羧基-β-单取代酞菁锌和2-L-组氨酸-羧基-β-单取代酞菁锌,其结构经UV-Vis,IR,MS和元素分析表征。     

Influence of chloride anions on the electrodeposition and electroactivity of the polymer matrix in polypyrrole,poly(<Emphasis Type="Italic">N</Emphasis>-methylpyrrole) and polypyrrole derivatives functionalized by titanocene centers,in dry non-aqueous solutions

We report electrochemical studies on the influence of a small concentration of chloride ions on the electroactivity of the polymer matrix of polypyrrole (PPy), poly(N-methylpyrrole) [p(N-MePy)] and a poly(titanocene-propyl-pyrrole) derivative, p(Tc3Py) [Tc(CH₂)₃NC₄H₄; Tc=CpCpTiCl₂; Cp=C₅H₅; Cp=C₅H₄] in acetonitrile (AN), tetrahydrofuran (THF) and N,N-dimethylformamide (DMF). The polymer films were obtained on Pt disc electrodes from AN solutions of the monomers containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF₆) as the supporting electrolyte and then transferred to the corresponding monomer-free solution. Studies in Cl^–-containing solutions have shown that the p(Tc3Py) matrix is very sensitive to the presence of Cl^– ions in all the above solvents, namely that it was subjected to electrochemical degradation at potentials above 0.1 V vs. a Ag/0.01 M Ag⁺ in AN reference electrode. Degradation of the p(Tc3Py) matrix was also observed in chloride-free DMF+TBAPF₆ solutions. Addition of chloride ions to the AN solution containing pyrrole, N-methylpyrrole or Tc3Py inhibits the deposition of the polymer films. On the other hand, we have found that PPy and p(N-MePy) matrices after their deposition in chloride-free AN solutions show much more stable redox responses in contact with chloride and/or DMF solutions. Possible mechanisms of these effects are discussed.Abbreviations AN acetonitrile - Cp cyclopentadienyl - DMF N,N-dimethylformamide - N-MePy N-methylpyrrole - p(N-MePy) poly(N-methylpyrrole) - PPy polypyrrole - p(Tc3Py) poly[Tc(CH₂)₃NC₄H₄] - Py pyrrole - Tc titanocene=bis(cyclopentadienyl)titanium dichloride, Cp₂TiCl₂, or its radical CpCpTiCl₂ (Cp=C₅H₄) - Tc3Py titanocene-propyl-pyrrole, Tc(CH₂)₃NC₄H₄ - THF tetrahydrofuran Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

Thermal decomposition of transition metal carboxylates

Thermal solid-phase decomposition of anhydrous copper(ii) formate has been studied at 120–180 ° The rate of gas evolution during the decomposition depends on the depth of conversion and can be presented as the sum of first-order reaction rates and the rate of the autocatalytic process (a second-order reaction). The evolution of the solid phase during thermolysis has been observed by optical microscopy. The decomposition of copper formate is a complex topochemical process, a combination of homogeneous and heterogeneous transformations and dispersion of large crystals.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. l, pp. 72–76, January, 1996.