对BJH方法计算孔径分布过程的解读

This paper introduces the geometric assumptions and neglects of the pore size distribution calculated by BJH method, the arithmetic approximation for simplified calculation, the derivation process of each parameter, the calculation steps and key points of the pore size distribution. This paper also introduces the application scope of BJH method at the current instrument level, and how to further integrate the data. In order to get the required analysis and test report, references are provided for the subsequent adjustment of test parameters and improvement of test methods. Some problems often encountered in reading experimental reports are also discussed.     

基于窄内径多孔层毛细管开管柱的纳流高效液相色谱用于N-衍生化氨基酸对映体的分离

窄内径多孔层毛细管开管柱（NPLOT柱）在生命科学领域,特别是单细胞分析领域具有较好的应用前景。本研究采用原位热引发聚合法来制备窄内径奎尼丁类手性固定相多孔层开管柱,在6 μ m i.d.的毛细管中制备有机聚合物多孔层,考察了不同热聚合时间（3、6和9 h）对NPLOT柱形貌的影响,热聚3 h和6 h制备的NPLOT柱形貌均一,多孔层厚度分别为103±51 nm和210±51 nm。将热聚合3 h制备的NPLOT柱用于纳流高效液相色谱分离N-衍生化氨基酸对映体,在2 min内即可实现基本分离,消耗的样品量仅为皮升级别。该研究将为单细胞分析提供研究手段。     

Evaluation of 3D Printed Gelatin‐Based Scaffolds with Varying Pore Size for MSC‐Based Adipose Tissue Engineering

Adipose tissue engineering aims to provide solutions to patients who require tissue reconstruction following mastectomies or other soft tissue trauma. Mesenchymal stromal cells (MSCs) robustly differentiate into the adipogenic lineage and are attractive candidates for adipose tissue engineering. This work investigates whether pore size modulates adipogenic differentiation of MSCs toward identifying optimal scaffold pore size and whether pore size modulates spatial infiltration of adipogenically differentiated cells. To assess this, extrusion‐based 3D printing is used to fabricate photo‐crosslinkable gelatin‐based scaffolds with pore sizes in the range of 200–600 µm. The adipogenic differentiation of MSCs seeded onto these scaffolds is evaluated and robust lipid droplet formation is observed across all scaffold groups as early as after day 6 of culture. Expression of adipogenic genes on scaffolds increases significantly over time, compared to TCP controls. Furthermore, it is found that the spatial distribution of cells is dependent on the scaffold pore size, with larger pores leading to a more uniform spatial distribution of adipogenically differentiated cells. Overall, these data provide first insights into the role of scaffold pore size on MSC‐based adipogenic differentiation and contribute toward the rational design of biomaterials for adipose tissue engineering in 3D volumetric spaces.     

Modeling and testing of snow penetration

Penetration by a cone into snow is commonly used to characterize snow properties. However, the effects of the diameter and half-angle of the cone on the mechanical properties of snow have not been systematically studied. In addition, no estimation of material parameters in a physically-based model has been made such that the results from penetration provide only an index of snow properties. In this paper, modeling and experimental methods are used to examine the effects of cone geometry on the maximum penetration force and associated hardness, with penetrometers ranging from 2.5 to 4 mm in diameter, 15° to 45° in cone half-angle, and testing both fine-grained and coarse-grained snows. The material point method, in conjunction with the Drucker–Prager cap plasticity model, was used to obtain the theoretical penetration force-distance relationship. Global sensitivity studies were conducted that indicate that the cohesion accounts for 86% of the penetration force, followed distantly by friction angle which accounts for 27%. A general trend, for the simulation results was established: for a given half-angle, the penetration force increases with the increase of diameter which holds for most of the test data as well; for a given diameter, the penetration force decreases with the increase of half-angle, which holds for some of the test data. In addition, for a given half-angle, the hardness decreases with the increase of diameter; for a given diameter, the hardness decreases with the increase of half-angle. To take into consideration the uncertainty of test data, a simple interval-based metric was used to compare test data with simulation results; the comparison was satisfactory. The material parameters from the simulations can thus be considered as calibrated ones for the snow studied.     

A GENERALIZED MODELING FOR CEMENT-BASED MATERIALS UNDER LARGE RANGE OF COMPRESSION STATE

The aim of this study is to describe the main behavior of cement-based materials under large compression state based on the recent experimental research. In this paper, the strainstress relations are firstly analyzed and confining pressure state is regarded as low/medium/high state. A generalized cup modeling is introduced by a coupled deviatoric shearing, pore collapse and damage mechanism within thermodynamic framework. A series of numerical simulations are performed for the considered cement paste and concrete. Comparisons between numerical predictions and experimental results show that the proposed model is able to describe the main features of mechanical behavior under large range of compression state.     

Dynamic light scattering study of the ultrasonication of P(VDF-TrFE): A new model

The purpose of this paper is to understand the mechanisms occurring during the ultrasonication of the copolymer poly(vinylidenedifluoride-trifluoroethylene). In these experimental conditions, the polymer adopts a core–shell structure and its hydrodynamic diameter is measured by dynamic light scattering. The results show that, without covalent bonds breakage, the hydrodynamic diameter decreases with ultrasonication time and a smaller size population appears. This evolution is reversible in a matter of days. A new two-step mechanism is proposed to describe this phenomenon: first the erosion of a core–shell structure and second the contraction of the core. Beyond shedding a new light on the phenomena occurring during the sonication of polymers used in nanocomposites elaboration, this work also strongly questions the traditional techniques used to study the degradation of polymers, which use the hydrodynamic diameter measurement to determine the molecular weight.     

Testifying experiment of the multi-pulse phenomena of capillary discharge soft-X-ray laser

In a capillary discharge experiment for the neon-like argon lasing, we have proposed an experimental scheme to verify that the multi-spike of X-ray diode (XRD) signal is a multi-pulse laser or is a reflection of the laser pulse in the XRD.The ceramic capillary has an inner diameter of 3mm and a length of 200mm.At the gas pressure of 28Pa and discharge current of 27kA, stable lasing has been realized.The experimental results prove that the multi-spike of XRD signal is a reflection of the electromagnetic signal produced by the laser pulse in the XRD.The improved electrocircuit scheme of the XRD to minimize the reflection phenomena is also found.     

On the Diameter of Plane Curves

Recently, differential geometric properties of embedded projective varieties have gained increasing interest. In this note, we consider plane algebraic curves equipped with the Fubini--Study metric from₂ () and give an estimate for the diameter in terms of the degree, initiated in a paper by F. A. Bogomolov.     

A peculiarity of diffraction measurements using a Gaussian laser beam

Numerical modelling of the Gaussian beam diffraction by a wire near the Fraunhofer limit is presented. Two cases are considered: the case of the wire being on the axis of the beam and the case of the wire being off-axis. For the case where the wire is on the axis, the displacements of the diffracted minima are calculated. For the off-axis case, the changes in the positions of the maxima and minima and the power density are calculated. The conditions are determined at which the measurements made using a Gaussian beam can be calculated using the formula for plane waves. This work arises in connection with research being performed into the Doppler spectrum of big particles.