Pressure and temperature effects on the excess deuteron and proton conductance

The limiting molar conductances ° of deuterium chloride DCl in D₂O were determined as a function of pressure and temperature in order to examine the proton-jump mechanism in detail. The excess deuteron conductances °_E(D ⁺), as estimated by the equation [°_E(D ⁺) = °(DCl/D ₂ O) – °(KCl/D ₂ O)], increases with an increase in the pressure and temperature as well as the excess proton conductance [°_E(H ⁺) = °(HCl/H ₂ O) – °(KCl/H ₂ O)]. The isotope effect on the excess conductances, however, depends on the pressure and temperature contrary to the model proposed by Conway et al.: °_E(H ⁺)/°_E(D ⁺) decreases with increasing pressure and temperature. The magnitude of the decrease with pressure becomes more prominent at lower temperature. These results are discussed in terms of the pre-rotation of adjacent water molecules, the bending of hydrogen bonds with pressure, and the difference in strength of hydrogen bonds between D₂O and H₂O.     

水溶性席夫碱型锰配合物的合成、表征及其模拟超氧化物歧化酶活性研究

以水杨醛为母体, 与胺类化合物缩合形成席夫碱配体, 用分子自组装法合成了一系列水溶性席夫碱型金属锰单核、双核配合物. 通过元素分析、红外光谱对配合物进行了表征, 采用邻苯三酚自氧化法测定了配合物的超氧化物歧化酶(SOD)活性. 结果表明, 这些水溶性锰配合物具有良好的SOD活性.     

微粉化技术提高水不溶性药物溶解度

药物的微粉化可以改善颗粒的润湿性,进而提高水不溶性药物的溶解度和溶解速率。目前普遍采用的药物微粒化技术主要包括机械研磨、超临界流体过程、低温喷淋和溶剂蒸发沉积过程。本文介绍了这些微粉化制备技术的基本原理以及该类技术的应用进展。     

合成丙交酯中微量水分分析

合成丙交酯中微量水分分析徐溢，柳胜春（重庆大学化工学院分析教研室６３００４４）关键词丙交酯，微量水，定量分析丙交酯是人工合成骨材料聚乳酸的合成中间体，其性能决定着合成产品的品质，要获得高质量的合成材料，对中间体的分析和监测十分重要。一般要求丙交酯中间...     

外加无机电解质对煤浆性质调控作用的研究

考察了数种无机电解质对煤浆分散体系流变特性的影响。结果发现，煤浆的流变特性不仅与电解质种类有关，还取决于煤质特征。某些煤适，适量的无机电解质可使浆体的屈报胀塑料转化为屈服假塑性。     

水浸对含钕熔铁氨合成催化剂的影响

已有熔铁氨合成催化剂中添加稀土的报道.我们通过添加稀土得到了几种活性较高的催化剂,经进一步改进制备工艺(水浸处理后),活性又有所提高.本文利用XRD和AES等,对经水浸前后的含稀土催化剂的结构进行了测试,探讨了水浸后活性提高的原因.     

Sub-zero temperature behavior of water in non-ionic microemulsions

Sub-zero temperature DSC measurements were conducted to evaluate the behavior of water in non-ionic microemulsions. Two surfactant systems were studied. The first, based on ethoxylated fatty alcohol, octaethylene glycol monon-dodecylether [hereafter referred to as C₁₂(EO)₈] and also containing water, pentanol and dodecane at a fixed weight ratio of 1:1. The second system, based on oligomeric ethoxylated siloxanes, water and dodecanol as oil phase. In both systems it was found that in up to 30 wt.% of the total water content, all water molecules solubilize in the amphiphilic phase and are bound to the ethylene oxide (hereafter referred to as EO) head-groups. No free water exists in the surfactant aggregates’ core. Up to three molecules of water are bound to each EO group. In the first system, the behavior changes significantly upon adding more water. The added pentanol allows further swelling and the water penetrates into the amphiphile structures and forms a reservoir of free water. Structures are deformed and grow from elongated channels (up to 15–20 wt.% water), via illdefined (one-dimensional growth) local lamellar structures (up to ca. 60 wt.% water) to spherical normal, O/W micelles (at ≥85 wt.% water). In contrast, the oligomeric systems, due to geometrical restrictions of the amphiphiles and the nature of their curvature that prevents inversion, cannot further solubilize water in the surfactant aggregates’ core, causing phase separation to occur. Part of the results presented in this paper were included in S. E.’s doctoral thesis in Applied Chemistry at The Hebrew University of Jerusalem, Israel.     

环境水样及食品中亚硝酸根的分析进展

评述了自1997年至2002年国内外环境水样及食品中亚硝酸根(NO2^-)的分析进展。包括分子光谱法、电化学分析法和色谱分析法，引用文献96篇。