A method and program for mass quantum chemical calculations of protein—ligand docking complexes

A new fast computational method for mass calculations of docking complexes by the AM1/PM3 semiempirical methods is proposed. The computation time is shortened by at least an order of magnitude compared to alternative schemes of quantum chemical calculations. The root-mean-square deviation of the AM1 calculated energies of formation of complexes from the results obtained by conventional diagonalization procedure is at most 0.4 kcal mol⁻¹. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 418–420, February, 2008.     

双（十二烷基亚磺酰）乙烷溶剂萃取钯及其机理的研究

本文研究用双（十二烷基亚磺酰）乙烷萃取钯的性能，在ＫＩ存在下从７ｍｏｌ／Ｌ盐酸介质中用含有ＢＤＳＥ的氯仿能定量萃取钯，有机的钯可被硫脲或氨溶液反萃继之用ＴＭＫ－ＴｒｉｔｏｎＸ－１００光度法测定，研究了萃取的最佳条件及干扰情况，斜率法测得萃合物组成为Ｐｄ：Ｉ：ＢＤＳＥ＝１：２：１，红外光谱证实萃合物中ＢＤＳＥ的二个亚砜以硫原子与钯配位，萃合物为异位体络合物，提出了选择性萃取分离钯的新方法。     

Synthesis of poly-yne polymers containing transition metals,disilane, disiloxane and phosphine groups in the main chain

The synthesis and characterization of metal poly-yne polymers containing disilane, disiloxane and phosphine groups in the main chain are described. The platinum and palladium poly-yne polymers were synthesized by polycondensation reactions between a metal chloride and an α, ω-bisethynyl complex in amines in the presence of cuprous iodide as a catalyst. The nickel poly-yne polymers were synthesized by an alkynyl ligand exchange reaction between a nickel acetylide and an α, ω-bisethynyl complex in diethylamine in the presence of cuprous iodide as a catalyst. The reaction of the platinum poly-yne polymer, containing disiloxane groups in the main chain, with copper (I) salts afforded adducts of η-²-bonded σ-acetylide polymer complexes. The reactions of the palladium poly-yne polymer, containing phosphine groups in the main chain, with transition-metal carbonyl complexes afforded polymer complexes which have phosphorus in the main chain-transition-metal bonds. A concentrated solution of the platinum poly-yne polymer containing disiloxane groups in the main chain forms a lyotropic liquid crystal in dichloromethane or 1, 2-dichloroethane.     

Ethylene polymerization by chromium complexes with phosphorous‐bridged bisphenoxy ligand

Chromium catalysts combined with phosphorous‐bridged bisphenoxy ligands were found to be highly active for ethylene polymerization. The most efficient catalyst precursor among them, generated by combining bis[3‐tert‐butyl‐5‐methyl‐2‐hydroxyphenyl](phenyl)phosphine hydrochloride ( 1a ) and CrCl₃(THF)₃, was characterized. X‐ray analysis of (3‐tert‐butyl‐5‐methyl‐2‐phenoxy)(3‐tert‐butyl‐5‐methyl‐ 2‐hydroxyphenyl)(phenyl)phosphine bis(tetrahydrofuran)chromium dichloride ( 6 ), obtained by the reaction of 1a and CrCl₃(THF)₃ in the presence of NaH, revealed a unique structure in which one phenol moiety of the bisphenol did not coordinate to the chromium center. Complex 6 showed higher activities than those observed in the in situ catalyst system. Polyethylene of various molecular weights was obtained with differing activators. The highest activity (113.5 kg mmol (cat)^?1 h^?1) was observed when TIBA/TB was used as a cocatalyst. A medium molecular weight polymer with narrow molecular weight distribution (M_w = 128,700, M_w/M_n = 1.8) was obtained using a 6 ‐TIBA/B(C₆F₅)₃ system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3668–3676, 2007     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

用铜（Ⅱ）—L—精氨酸配体交换薄层色谱拆分氨基酸对映体

报道了一种新的配体交换薄层色谱拆分氨基酸对映体的方法。以醋酸铜－Ｌ－精氨酸的络合物为配体交换剂，用浸渍的方法吸附在硅胶薄层板上，制成配体交换薄层，用ＰＲＩＳＭＡ优化法选择出展开剂的最佳组成为：甲醇／乙腈／四氢呋喃／水＝８０：８．２：５．８：６，在此色谱条件下，十对氨基酸对映体得到良好的分离，Ｄ－和Ｌ－氨基酸的相对比移值在１．０９－２．４０之间。文中对配体交换薄层的制备方法，样品的分子结构及色谱行为     

手性配体立体选择性萃取分离扁桃酸对映体

Based on chiral ligand exchange, the distribution behavior of mandelic acid enantiomers in the two-phase system containing copper ion(Ⅱ)(Cu²⁺) and N-n-dedecane-L-hydroxyproline (L), was studied. At different pH, the partition of Cu²⁺ in the two-phase system containing N-n-dedecane-L-hydroxyproline, was investigated. The formation constant of binary cpmplex(Li₂Cu) was obtained by regression. The influence of pH, concentrations of Cu²⁺ and chiral ligand, and solvents on partition coefficients(K) and separation factor(α), was discussed. The experimental results show that Li forms more stable ternary complex with D-mandelic acid than with L- mandelic acid. There is a large influence of pH on K and α. At low pH values (<3.5), formation of binary complexes is thermodynamically unfavourable. K and α are best when pH values are above 3.5 and the molar ratio of chiral ligand to Cu²⁺ is 2∶1. At the same time, solvents influence K and α very much.     

Highly Effective Phenol Hydroxylation over Ti-ZSM-5 Catalyst Prepared Using B-ZSM-5 as Precursor 以B-ZSM-5为母体合成Ti-ZSM-5高效苯酚羟基化催化剂

 以改进方法合成的B-ZSM-5为母体,采用气固相同晶取代法合成了较小晶粒的Ti-ZSM-5分子筛. 考察了样品的物化性能和催化苯酚羟基化性能. 结果表明: 所合成的小晶粒Ti-ZSM-5具有较高的结晶度,尺寸为100~200 nm,且不含锐钛矿型TiO2,对苯酚羟基化反应的催化性能优异.     

镍 钴 钯 铁2—（二苯基膦基）吡啶配合物的合成及其催化羰基化反应

众所周知,铑催化剂是醇类羰基化的有效催化剂,但是铑价格昂贵且对设备有腐蚀性,因此,寻找出对醇类羰基化催化活性好的非贵金属催化剂,对醇类羰化的工业化有十分重要的意义。 本文在温和条件下,合成了四种含有相同配体(Ph_2PPy)不同金属的有机配合物(金属基分别为Ni、Co、Pd、Fe),并探索了它们对乙醇羰基化反应的催化活性。