Isoprene‐Assisted Radical Coupling of (Co)polymers Prepared by Cobalt‐Mediated Radical Polymerization

Tackling blocks : The isoprene‐assisted radical coupling (I‐ARC) of polymers prepared by cobalt‐mediated radical polymerization (see picture) is the first efficient radical coupling method that is not restricted to short chains. When applied to AB diblock copolymers, I‐ARC constitutes a straightforward approach to the preparation of novel symmetrical ABA triblock copolymers.

     

Cobalt complex bearing β‐ketoamine ligand: syntheses,structure, catalytic behavior for styrene and methyl methacrylate polymerization

Cobalt complex based on β‐ketoamine ligand [(Z)‐4‐((2,5‐dimethylphenylamino) (phenyl)methylene)‐3‐methyl‐1‐phenyl‐1H‐pyrazol‐5(4H)‐one] was successfully synthesized. The produced catalyst showed satisfactory activities in the cobalt‐mediated radical polymerization of styrene and methyl methacrylate with the common initiator of AIBN. The resulting polymerizations have the characteristics of living radical polymerization and displayed a nearly linear correlation between the number‐average molecular weight and monomer conversion. Low polydispersity was obtained for all polymerizations, and the polydispersity index decreased with the increase of conversion. These improvements facilitate the implementation of styrene and methacrylate cobalt‐mediated radical polymerization, and open the door to the scale‐up of the process. Copyright © 2014 John Wiley & Sons, Ltd.     

Atom transfer radical polymerization of methyl methacrylate catalyzed by ion exchange resin immobilized Co(II) hybrid catalyst

Ion exchange resin immobilized Co(II) catalyst with a small amount of soluble CuCl₂/Me₆TREN catalyst was successfully applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in DMF. Using this catalyst, a high conversion of MMA (>90%) was achieved. And poly(methyl methacrylate) (PMMA) with predicted molecular weight and narrow molecular weight distribution (M_w/M_n = 1.09–1.42) was obtained. The immobilized catalyst can be easily separated from the polymerization system by simple centrifugation after polymerization, resulting in the concentration of transition metal residues in polymer product was as low as 10 ppm. Both main catalytic activity and good controllability over the polymerization were retained by the recycled catalyst without any regeneration process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1416–1426, 2008     

Living radical polymerization of acrylates mediated by 1,3-bis(2-pyridylimino)isoindolatocobalt(II) complexes: monitoring the chain growth at the metal

A new type of mediator for cobalt(II)-mediated radical polymerization is reported which is based on 1,3-bis(2-pyridylimino)isoindolate (bpi) as ancillary ligand. The modular synthesis of the bis(pyridylimino)isoindoles (bpiH) employed in this work is based on the condensation of 2-aminopyridines with phthalodinitriles. Reaction of the bpiH protio-ligands with a twofold excess of cobalt(II) acetate or cobalt(II) acetylacetonate in methanol gave [Co(bpi)(OAc)], which crystallize as coordination polymers, and a series of [Co(acac)(bpi)(MeOH)], which are mononuclear octahedral complexes. Upon heating the [Co(acac)(bpi)(MeOH)] compounds to 100 degrees C under high vacuum, the coordinated methanol was removed to give the five-coordinate complexes [Co(acac)(bpi)]. The polymerization of methyl acrylate at 60 degrees C was investigated by using one molar equivalent of the relatively short-lived radical source 2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile) (V-70) as initiator (monomer/catalyst/V-70: 600:1:1). The low solubility of the acetato complexes inhibits their significant activity as mediators in this reaction, whereas the acetylacetonate complexes control the radical polymerization of methyl acrylate more effectively. The radical polymerizations of the hexacoordinate complexes did not show a linear increase in number-average molecular weight (M(n)) with conversion; however, the polydispersities were relatively low (PDI=1.12-1.40). By using the pentacoordinate complexes [Co(acac)(bpi)] as mediators, a linear increase in M(n) values with conversion, which were very close to the theoretical values for living systems, and very low polydispersities (PDI<1.13) were obtained. This was also achieved in the block copolymerization of methyl acrylate and n-butyl acrylate. The intermediates with the growing acrylate polymer radical ((.)PA) were identified by liquid injection field desorption/ionization mass spectrometry as following the general formula [Co(acac)(4-methoxy-bpi)-(MA)(n)-R] (MA: methyl acrylate; R: C(CH(3))(CH(2)C(CH(3))(2)OCH(3))CN), a notion also confirmed by NMR end-group analysis.     

Key Role of Intramolecular Metal Chelation and Hydrogen Bonding in the Cobalt‐Mediated Radical Polymerization of N‐Vinyl Amides

This work reveals the preponderance of an intramolecular metal chelation phenomenon in a controlled radical polymerization system involving the reversible trapping of the radical chains by a cobalt complex bis(acetylacetonato)cobalt(II). The cobalt‐mediated radical polymerization (CMRP) of a series of N‐vinyl amides was considered with the aim of studying the effect of the cobalt chelation by the amide moiety of the last monomer unit of the chain. The latter reinforces the cobalt? polymer bond in the order N‐vinylpyrrolidone<N‐vinyl caprolactam<N‐methyl‐N‐vinyl acetamide, and is responsible for the optimal control of the polymerizations observed for the last two monomers. Such a double linkage between the controlling agent and the polymer, through a covalent bond and a dative bond, is unique in the field of controlled radical polymerization and represents a powerful opportunity to fine tune the equilibrium between latent and free radicals. Possible hydrogen bond formation is also taken into account in the case of N‐vinyl acetamide and N‐vinyl formamide. These results are essential for understanding the factors influencing Co? C bond strength in general, and the CMRP mechanism in particular, but also for developing a powerful platform for the synthesis of new precision poly(N‐vinyl amide) materials, which are an important class of polymers that sustain numerous applications today.     

Synthesis of poly(vinyl acetate)‐graft‐polystyrene by a combination of cobalt‐mediated radical polymerization and atom transfer radical polymerization

Vinyl acetate and vinyl chloroacetate were copolymerized in the presence of a bis(trifluoro‐2,4‐pentanedionato)cobalt(II) complex and 2,2′‐azobis(4‐methoxy‐2,4‐dimethylvaleronitrile) at 30 °C, forming a cobalt‐capped poly(vinyl acetate‐co‐vinyl chloroacetate). The addition of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy after a certain degree of copolymerization was reached afforded 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐terminated poly(vinyl acetate‐co‐vinyl chloroacetate) (PVOAc–MI; number‐average molecular weight = 31,000, weight‐average molecular weight/number‐average molecular weight = 1.24). A ¹H NMR study of the resulting PVOAc–MI revealed quantitative terminal 2,2,6,6‐tetramethyl‐1‐piperidinyloxy functionality and the presence of 5.5 mol % vinyl chloroacetate in the copolymer. The atom transfer radical polymerization (ATRP) of styrene (St) was studied with ethyl chloroacetate as a model initiator and five different Cu‐based catalysts. Catalysts with bis(2‐pyridylmethyl)octadecylamine (BPMODA) or tris(2‐pyridylmethyl)amine (TPMA) ligands provided the highest initiation efficiency and best control over the polymerization of St. The grafting‐from ATRP of St from PVOAc–MI catalyzed by copper complexes with BPMODA or TPMA ligands provided poly(vinyl acetate)‐graft‐polystyrene copolymers with relatively high polydispersity (>1.5) because of intermolecular coupling between growing polystyrene (PSt) grafts. After the hydrolysis of the graft copolymers, the cleaved PSt side chains had a monomodal molecular weight distribution with some tailing toward the lower number‐average molecular weight region because of termination. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 447–459, 2007     

Modeling the Synthesis of Butyl Methacrylate Macromonomer by Sequential ATRP‐CCTP

The atom transfer radical polymerization of butyl methacrylate mediated by Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine in anisole at 70 °C with the subsequent addition of bis(difluoroboryldiphenylglyoximato)cobalt(II) after 2 h is modeled using Predici software, to gain additional insight to the system used experimentally to produce macromonomer chains with narrow dispersity. The mechanistic model, using kinetic coefficients from the literature and activation and deactivation rate coefficients estimated from this work, provides a good representation of experimental results. The simulations demonstrate that the time (conversion) at which cobalt chain transfer agent is added to the system is critical to control the number‐average molar mass of the final product and also confirm that chains of higher length in the final product are more likely to be nonfunctionalized, in agreement with experimental observations. The model predicts the production of a significant fraction of macromonomer oligomers with lengths of 1–3 units, also consistent with experiments.     

Cobalt-mediated radical polymerization of acrylonitrile: kinetics investigations and DFT calculations

The successful controlled homopolymerization of acrylonitrile (AN) by cobalt-mediated radical polymerization (CMRP) is reported for the first time. As a rule, initiation of the polymerization was carried out starting from a conventional azo-initiator (V-70) in the presence of bis(acetylacetonato)cobalt(II) ([Co(acac)(2)]) but also by using organocobalt(III) adducts. Molar concentration ratios of the reactants, the temperature, and the solvent were tuned, and the effect of these parameters on the course of the polymerization is discussed in detail. The best level of control was observed when the AN polymerization was initiated by an organocobalt(III) adduct at 0 degrees C in dimethyl sulfoxide. Under these conditions, poly(acrylonitrile) with a predictable molar mass and molar mass distribution as low as 1.1 was prepared. A combination of kinetic data, X-ray analyses, and DFT calculations were used to rationalize the results and to draw conclusions on the key role played by the solvent molecules in the process. These important mechanistic insights also permit an explanation of the unexpected "solvent effect" that allows the preparation of well-defined poly(vinyl acetate)-b-poly(acrylonitrile) by CMRP.     

Cobalt‐Mediated Radical Polymerization of Vinyl Acetate and Acrylonitrile in Supercritical Carbon Dioxide

Cobalt‐mediated radical polymerization (CMRP) of vinyl acetate (VAc) is successfully achieved in supercritical carbon dioxide (scCO₂). CMRP of VAc is conducted using an alkyl‐cobalt(III) adduct that is soluble in scCO₂. Kinetics studies coupled to visual observations of the polymerization medium highlight that the melt viscosity and PVAc molar mass (M_n) are key parameters that affect the CMRP in scCO₂. It is noticed that CMRP is controlled for M_n up to 10 000 g mol⁻¹, but loss of control is progressively observed for higher molar masses when PVAc precipitates in the polymerization medium. Low molar mass PVAc macroinitiator, prepared by CMRP in scCO₂, is then successfully used to initiate the acrylonitrile polymerization. PVAc‐b‐PAN block copolymer is collected as a free flowing powder at the end of the process although the dispersity of the copolymer increases with the reaction time. Although optimization is required to decrease the dispersity of the polymer formed, this CMRP process opens new perspectives for macromolecular engineering in scCO₂ without the utilization of fluorinated comonomers or organic solvents.

     

Radical Polymerization of Vinyl Acetate with Bis(tetramethylheptadionato)cobalt(II): Coexistence of Three Different Mechanisms

Poly(vinyl acetate) by OMRP : Increasing the steric encumbrance of the β‐diketonate R substituents in vinyl acetate (VAc) polymerization mediator [Co{OC(R)CHC(R)O}₂] from Me to tBu sufficiently weakens the Co^III? PVAc bond of the polymer chain to allow it to operate by both associative (degenerative transfer) and dissociative (organometallic radical polymerization, OMRP) mechanisms (see scheme). The Co^III? PVAc species also acts as a transfer agent in the absence of Lewis bases, whereas the Co^II complex shows catalytic chain transfer (CCT) activity.

     

Mechanistic insights into the cobalt-mediated radical polymerization (CMRP) of vinyl acetate with cobalt(III) adducts as initiators

Over the past few years, cobalt-mediated radical polymerization (CMRP) has proved efficient in controlling the radical polymerization of very reactive monomers, such as vinyl acetate (VAc). However, the reason for this success and the intimate mechanism remained basically speculative. Herein, two mechanisms are shown to coexist: the reversible termination of the growing poly(vinyl acetate) chains by the Co(acac)2 complex (acac: acetylacetonato), and a degenerative chain-transfer process. The importance of one contribution over the other strongly depends on the polymerization conditions, including complexation of cobalt by ligands, such as water and pyridine. This significant progress in the CMRP mechanism relies on the isolation and characterization of the very first cobalt adducts formed in the polymerization medium and their use as CMRP initiators. The structure proposed for these adducts was supported by DFT calculations. Beyond the control of the VAc polymerization, which is the best ever achieved by CMRP, extension to other monomers and substantial progress in macromolecular engineering are now realistic forecasts.     

Atom transfer radical polymerization of methyl methacrylate catalyzed by cobalt catalyst system

A new catalyst system, CoCl₂/tris(2‐(dimethyl amino) ethyl)amine (Me₆ TREN), was used to catalyze the polymerization of methyl methacrylate (MMA) successfully through atom transfer radical polymerization mechanism. The control over the polymerization was not ideal, the molecular weight distribution of the resulting polymer (PMMA) was relatively broad (M_w/M_n = 1.63–1.80). To improve its controllability, a small amount of hybrid deactivator (FeBr₃/Me₆TREN or CuBr₂/Me₆TREN) was added in the cobalt catalyst system. The results showed that the level of control over the polymerization was significantly improved with the hybrid cobalt–iron (or cobalt–copper) catalyst system; the polydispersity index of the resulting polymer was reduced to a low level (M_w/M_n = 1.15–1.46). Furthermore, with the hybrid cobalt–iron catalyst, the dependence of the propagation rate on the temperature and the copolymerization of methacrylate (MA) with PMMA‐Br as macroinitiator were also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5207–5216, 2005     

Effect of electron donors on the radical polymerization of vinyl acetate mediated by [Co(acac)2]: degenerative transfer versus reversible homolytic cleavage of an organocobalt(III) complex

The molecular structure of bis(acetylacetonate)cobalt(II) ([Co(acac)2]) in solution and in the presence of the electron donors (ED) pyridine (py), NEt3, and vinyl acetate (VOAc) was investigated using 1H NMR spectroscopy in C6D6. The extent of formation of ligand adducts, [Co(acac)2(ED)x], varies in the order py>NEt3>VOAc (no interaction). Density functional theory (DFT) calculations on a model system agree with Co--ED bond strengths decreasing in the same order. The effect of electron donors on the [Co(acac)2]-mediated radical polymerization of VOAc was examined at 30 degrees C by the addition of excess py or NEt3 to the complex in the molar ratio [VOAc]0/[Co]0/[V-70]0/[py or NEt3]0=500:1:1:30 (V-70=2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile)). As previously reported by R. Jerome et al., the polymerization showed long induction periods in the absence of ED. However, a controlled polymerization without an induction period took place in the presence of ED, though the level of control was poorer. The effective polymerization rate decreased in the order py>NEt3. A similar behavior was found when these electron donors were added to an ongoing [Co(acac)2]-mediated radical polymerization of VOAc. On the basis of the NMR and DFT studies, it is proposed that the polymerization is controlled by the reversible homolytic cleavage of an organocobalt(III) dormant species in the presence of ED. Conversely, the faster polymerization after the induction period in the absence of ED is due to a degenerative transfer process with the radicals produced by the continuous decomposition of the excess initiator. Complementary experiments provide additional results in agreement with this interpretation.     

Cobalt‐Mediated Radical Coupling (CMRC): An Unusual Route to Midchain‐Functionalized Symmetrical Macromolecules

Cobalt‐mediated radical coupling (CMRC) is a straightforward approach to the synthesis of symmetrical macromolecules that relies on the addition of 1,3‐diene compounds onto polymer precursors preformed by cobalt‐mediated radical polymerization (CMRP). Mechanistic features that make this process so efficient for radical polymer coupling are reported here. The mechanism was established on the basis of NMR spectroscopy and MALDI‐MS analyses of the coupling product and corroborated by DFT calculations. A key feature of CMRC is the preferential insertion of two diene units in the middle of the chain of the coupling product mainly according to a trans‐1,4‐addition pathway. The large tolerance of CMRC towards the diene structure is demonstrated and the impact of this new coupling method on macromolecular engineering is discussed, especially for midchain functionalization of polymers. It is worth noting that the interest in CMRC goes beyond the field of polymer chemistry, since it constitutes a novel carbon–carbon bond formation method that could be applied to small organic molecules.     

Cobalt‐mediated radical polymerization routes to poly(vinyl ester) block copolymers

Cobalt‐mediated radical polymerizations (CMRPs) utilizing redox initiation are demonstrated to produce poly(vinyl ester) homopolymers derived from vinyl pivalate (VPv) and vinyl benzoate (VBz), and their block copolymers with vinyl acetate (VAc). Combining anhydrous Co(acac)₂, lauroyl peroxide, citric acid trisodium salt, and VPv at 30 °C results in controlled polymerizations that yield homopolymers with M_n = 2.5–27 kg/mol with M_w/M_n = 1.20–1.30. Homopolymerizations of scrupulously purified VBz proceed with lower levels of control as evidenced by broader polydispersities over a range of molecular weights (M_n = 4–16 kg/mol; M_w/M_n = 1.34–1.65), which may be interpreted in terms of the decreased nucleophilicity of these less electron donating propagating polymer chain ends. Based on these results, we demonstrate that sequential CMRP reactions present a viable route to microphase separated poly(vinyl ester) block copolymers as shown by small‐angle X‐ray scattering analyses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Organometallic‐Mediated Radical Polymerization of Vinylidene Fluoride

An unprecedented level of control for the radical polymerization of vinylidene fluoride (VDF), yielding well‐defined PVDF (at least up to 14 500 g mol^?1) with low dispersity (≤1.32), was achieved using organometallic‐mediated radical polymerization (OMRP) with an organocobalt compound as initiator. The high chain‐end fidelity was demonstrated by the synthesis of PVDF‐ and PVAc‐containing di‐and triblock copolymers. DFT calculations rationalize the efficient reactivation of both head and tail chain end dormant species.     

原子转移自由基聚合及可控自由基聚合

以作者在原子转移自由基聚合领域的研究成果为主导,结合国内外文献,对近年来出现的颇具影响的可控自由基聚合体系与进行了评述与展望。