A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.     

Analysis and finite element simulations of a second‐order fluid model in a bounded domain

This article is concerned with the equations governing the steady motion of a viscoelastic incompressible second‐order fluid in a bounded domain. A new proof of existence and uniqueness of strong solutions is given. In addition, using appropriate finite element methods to approximate a coupled equivalent problem, sharp error estimates are obtained using a fixed point argument. The method is applied to the two‐dimensional lid‐driven cavity problem, at low Reynolds number and in a certain range of values of the viscoelastic parameters, to analyze the combined effects of inertia and viscoelasticity on the flow. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

Alternative Scheme for Teleportation of Two-Atom Entangled State in Cavity QED

We have proposed an alternative scheme for teleportation of two-atom entangled state in cavity QED. It is based on the degenerate Raman interaction of a single-mode cavity field with a ∧-type three-level atom. The prominent feature of the scheme is that only one cavity is required, which is prior to the previous one. Moreover, the atoms need to be detected are reduced compared with the previous scheme. The experimental feasibility of the scheme is discussed.The scheme can easily be generalized for teleportation of N-atom GHZ entangled states. The number of the atoms needed to be detected does not increase as the number of the atoms in GHZ state increases.     

激光二极管泵浦单频连续工作的Nd：YAG激光器

在国内首次报道了激光二极管泵浦单频连续工作的Ｎｄ：ＹＡＧ激光器，采用扭摆模腔技术方法，在８０８ｎｍ激光二极管连续泵浦下，取得１０６４ｎｍ连续单频工作，输出功率５５ｍＷ的结果，泵浦阈值２７６ｍＷ，斜率效率２３％，线宽小于２５ＭＨｚ（受仪器测量精度限制）。     

偶数个多原子Greenberger-Horne-Zerlinger态的制备

提出了一种制备偶数个多原子Greenberger-Horne-Zerlinger态的方案,它是基于原子-腔场相互作用.首先n个分离的腔初始时处于真空态,通过双光子转移,把n个腔制备成数态|2>和真空态|o>的缠结态.随后,与腔场发生共振相互作用的2n个等同的原子被分别送入n个腔,通过相互作用后,2n个原子处于GHZ态,而n个腔仍然处于真空态.     

光纤环形外腔半导体激光器频偏特性研究

本文给出了在环形光纤外腔光反馈之下半导体激光器频偏特性的小信号分析理论.分析表明,尤其在千兆赫以下的调制频段中,耦合腔相移、内外腔光耦合强度及内外腔光场相位失谐对频偏功率比均有显著影响.可望用作强度调制直接检测高速率、长距离光纤通信系统中的光源.     

1．5GHz锯材超导腔的研制

介绍铌材超导腔的研制进展，重点讨论了国产铌腔的材料改性，以及相应的超导腔性能的改进．叙述了１．５ＧＨｚ铌腔的腔形设计，分析了铌材的射频性能和机械性能，制定了铌腔制作与后处理的特定工艺．最后给出了１．５ＧＨｚ铌材超导腔的低温实验结果．     

双金属洋葱结构纳米Mo0.9W0.1S2的合成

0 引言 继碳富勒烯和碳纳米管的发现,1992年R.Tenne等首次在Nature上发表了具有类富勒烯和纳米管结构的WS_2,开创了非碳无机类富勒烯(Inorganic Fullerene-like,简称IF)纳米化合物研究的新领域。由于具有与富勒烯碳或碳纳米管相类似     

以PVA为分散介质制备纳米氧化铁颗粒及其ESR特征(英文)

利用金属离子在高分子配合物中独特的离子簇结构以及PVA对所制样品颗粒的良好保护和分散作用,通过配位转换的方法,在PVA介质中制备出超微氧化铁颗粒,并通过高温煅烧高分子金属氧化物复合体获得红褐色纳米氧化铁颗粒.XRD测试表明此氧化物为α Fe2O3和Fe3O4的混合物,粒径为40～65nm;样品的ESR结果表明该法制备的氧化铁颗粒具有较强的磁性.同时,还初步研究了PVA中氧浓度与Fe离子浓度的比及氨水浓度对产物粒径的影响.     

后处理对TiO_2纳米薄膜的表面结构和光催化活性的影响

半导体TiO2光催化材料对环境中各种污染物的明显去除效果已引起人们的广泛关注犤1～6犦。在普通钠钙玻璃表面涂制高光催化活性的TiO2纳米薄膜,制成环保建筑材料,不仅可以自洁玻璃表面,而且可以用于净化空气、处理废水等。但由于在热处理过程中玻璃基体内的Na+离子扩散到薄膜表面,形成光生电子和空穴的复合中心,使TiO2纳米薄膜的光催化活性大大降低犤7～10犦。为了减少玻璃中Na+离子对TiO2薄膜光催化活性的有害影响,Paz等犤8犦研究了将钠钙玻璃浸入酸溶液中,使玻璃表面的钠离子被酸中的氢离子置换出来;在玻璃表面形成SiO2凝胶层,以便阻…