稀土掺杂的(K, Sr)Cl·SiO2复合凝胶的荧光性能

采用sol gel法制备了单掺铕及共掺铕、铈的(K,Sr)Cl·SiO2复合凝胶,研究了复合凝胶的荧光性能。根据荧光测试结果,复合凝胶中,Eu3+在没有还原剂的作用下,可以与基质作用形成还原态的Eu2+,复合凝胶表现出相应的Eu2+荧光性能;研究认为,Ce3+,Eu3+共掺杂时,复合凝胶激发光谱与发射光谱峰位基本不变,但强度有所不同。330nm处的激发光谱明显增强,且发射光谱随Ce3+的掺杂量增加而增强。当Ce3+掺杂浓度为3.0%(原子分数)时,复合凝胶具有最大的荧光发射强度,表明Ce3+具有很好的敏化作用。在Ce3+,Eu3+共掺杂复合凝胶体系中,复合凝胶荧光强度增大的原因既可能是电子转移过程,也可能是Ce3+→Eu2+的能量传递过程所致。     

YPxV1—xO4（0≤x≤1）：Dy^3＋的合成及其光谱性质的研究

本文报道了不同组成的ＹＰｘＶ１－ｘＯ４（０≤ｘ≤１）：Ｄｙ＾３＋的合成和结构。ＹＰｘＶ１－ｘＯ４（０≤ｘ≤１）为四方晶系，晶胞参数随ｘ的增大呈线性减小。基质的Ｓｔｏｋｅｓ位移随ｘ的增大逐渐变大，而激发光谱峰值则向短波方向移动。在ＹＰｘＶ１－ｘＯ４：０．００６Ｄｙ＾３＋体系中，ｘ＞０．４时出现的基质发射是由ＰＯ＾３－４引起的。基质及Ｄｙ＾３＋的发光效率和Ｄｙ＾３＋的发光强度的黄蓝比均与ｘ有关。同时探     

Eu（TTA）3·1／2（4，4′－bipyN_2O_2）配合物的发光光谱

在７７Ｋ下测定了Ｅｕ（ＴＴＡ）３·１／２（４，４′－ｂｉｐｙＮ２Ｏ２）配合物的激发光谱、发光光谱和时间分辨光谱。光谱数据表明，在标题配合物中存在化学环境不同的两种Ｅｕ３＋格位，但它们的局部对称性都属于Ｃ２Ｖ点群，这可能表明该配合物的激发态电子结构稍有不同     

固溶体结构对Ca2-xSrxZn4Ti15O36∶Pr3+发光性质的影响

Ca_2-xSr_xZn₄Ti₁₅O₃₆∶Pr red long decay phosphor was synthesized by high temperature solid state reaction. Photoluminescence property and crystalline and unit cell parameters of the orthorhombic were investigated by fluorescence spectrophotometer and by powder X-ray diffraction, respectively. The emission intensity at 618 nm changes sharply when the concentration of Sr²⁺ (x) is less than 0.1 and the emission intensity reaches the maximum when x is equal to 0.007. There is an obviously broad excitation band at 270 nm when x is equal to 0.003 and it disappears gradually when x is over 0.01. The unit cell a parameter of Ca_2-xSr_xZn₄Ti₁₅O₃₆∶Pr decreases while c parameter increases with the increases of the concentration of the doped Sr²⁺. When x is over 0.1 the value of the unit cell parameters a and c become stable. TL peaks of Ca₂Zn₄Ti₁₅O₃₆∶Pr, Ca_1.993Sr_0.007Zn₄Ti₁₅O₃₆∶0.002Pr³⁺, 0.002Na⁺, are located at 62 ℃, 88 ℃, respectively, which indicates that there are deeper traps in Ca_1.993Sr_0.007Zn₄Ti₁₅O₃₆∶0.002Pr³⁺, 0.002Na⁺.     

Time‐Resolved Synchrotron Radiation Excited Optical Luminescence: Light‐Emission Properties of Silicon‐Based Nanostructures

The recent advances in the study of light emission from matter induced by synchrotron radiation: X‐ray excited optical luminescence (XEOL) in the energy domain and time‐resolved X‐ray excited optical luminescence (TRXEOL) are described. The development of these element (absorption edge) selective, synchrotron X‐ray photons in, optical photons out techniques with time gating coincide with advances in third‐generation, insertion device based, synchrotron light sources. Electron bunches circulating in a storage ring emit very bright, widely energy tunable, short light pulses (<100 ps), which are used as the excitation source for investigation of light‐emitting materials. Luminescence from silicon nanostructures (porous silicon, silicon nanowires, and Si–CdSe heterostructures) is used to illustrate the applicability of these techniques and their great potential in future applications.     

R_3GeVO_9(R=Y,La)∶Eu~(3+)(或Dy~(3+))的合成及其发光性质

采用高温固相法合成了稀土复合钒锗酸盐R3GeVO9(R =Y ,La)体系 ,并以此为基质研究了Eu3+和Dy3+在其中的发光性质 ,以Eu3+为结构探针探讨了Eu3+在R3GeVO9(R =Y ,La)中的格位情况。同时 ,还研究了被取代离子R3+的Z/r对Eu3+的红橙比和Dy3+的黄蓝比的影响以及浓度、温度和Bi3+对它们发光强度的影响。     

Photovoltaic and spectral properties of tetraphenyloporphyrin and metallotetraphenyloporphyrin dyes

Spectroscopical properties and photocurrent (or photovoltage) of tetraphenyloporphyrins and metallotetraphenyloporphyrins in nematic liquid crystal have been studied. Photoelectric response has been measured in an electrochemical cell made of the semitransparent semiconducting and golden electrodes with porphyrin dyes embedded in liquid crystal. Fluorescence, time-resolved luminescence in microsecond time scale and photoacoustic spectra have also been measured. The competition between radiative, non-radiative processes and charge transfer is discussed. It has been shown that effectivity of porphyrins for photocurrent generation depends on the presence/absence of central metal in the macrocycle of porphyrin skeleton and the kind of metal. The schematic model of the contributions of the dye molecule and semiconducting electrode in the electron transfer process is shown.     

Synthesis, structure and X-ray excited luminescence of Ce-doped AREP2O7-type alkali rare earth diphosphates (A=Na, K, Rb, Cs; RE=Y, Lu)

The crystal structures of five new alkali rare earth diphosphates were obtained by Rietveld refinement of powder X-ray diffraction (XRD) profiles, including four alkali lutetium diphosphates ALuP₂O₇ (A=Na, K, Rb, Cs) and the low temperature phase of KYP₂O₇. The scintillation properties of Ce³⁺-doped AREP₂O₇ (A=Na, K, Rb, Cs; RE=Y, Lu) powder samples were studied under static and pulsed X-ray excitations, and featured outstanding scintillation properties with light yields 1–2 times of that of Bi₄(GeO₄)₃ and relatively short decay time of 20–28 ns. Considering the suitable emission wavelength range, large light yield, short decay time, and non-hygroscopic nature, Ce³⁺-doped AREP₂O₇-type alkali rare earth diphosphates are potential candidates for high-counting-rate scintillation applications.     

固体表面化学发光分析 Ⅰ.不渗透阻挡技术的应用和研究

本文应用不渗透阻挡技术在固体基质上保持恒定的化学发光区域，实现了固体表面化学发光分析，并对固体表面化学发光特性，发光的均匀性和重视性，固体基质的选择和纯化等方面进行了研究，测定了１３种无机及生物活性物质固体表面化学发光的线性范围及检测限。由于此法克服了固体基质荧光分析和固体表面室温磷光分析的散射光背景的影响，获得了更高的信噪比和更好的检测限。     

From model compounds to extended pi-conjugated systems: synthesis and properties of dithieno[3,2-b:2',3'-d]phospholes

To explore their suitability for applications in molecular optoelectronics and as sensory materials, novel dithieno[3,2-b:2',3'-d]phospholes have been synthesized and their reactivity and properties investigated. An efficient two-step synthesis allowed for a modular assembly of differently functionalized compounds. The dithieno[3,2-b:2',3'-d]phosphole system exhibits extraordinary optoelectronic properties with respect to wavelength, intensity, and tunability. Owing to the nucleophilic nature of the central phosphorus atom, its significant electronic influence on the conjugated pi system can be altered selectively by chemically facile modifications such as oxidation or complexation with Lewis acids or transition metals. All the dithienophosphole species presented show very strong blue photoluminescence with excellent quantum yield efficiencies supporting their potential utility as blue-light emitting components in organic light emitting diodes (OLEDs). Furthermore, depending on the electronic nature of the phosphorus center, the materials exhibit distinctive optoelectronic properties suggesting that the dithieno[3,2-b:2',3'-d]phosphole system may be useful as sensory material. Theoretical calculations, including time-dependent DFT methods, revealed the excellent predictability of the structures and optoelectronic properties of the functionalized dithienophospholes allowing the design of future dithieno[3,2-b:2',3'-d]phosphole-based materials to be "stream-lined". By using tin-functionalized dithienophosphole monomers, a strategy, which involves Stille coupling, towards extended pi-conjugated materials with significantly redshifted optoelectronic properties is also presented.