短脉冲激光尾流场中的前向Raman散射

用212维粒子模拟分析了前向Raman散射对激光尾流场加速电子的影响.前向Raman散射使脉冲长度在传播方向上被拉长，脉冲后沿变陡，产生的尾流场相速度明显减小，而且超热电子的最大动能明显小于理论估计值.此外激光频率整体向低频移动.     

Pressure-induced polymorphism in enstatite (MgSiO3) at room temperature: clinoenstatite and orthoenstatite

The phase transition of a synthetic clinoenstatite in a diamond-anvil cell has been studied by using Raman spectroscopy at various pressures and room temperature. The phenomena observed in clinoenstatite have been compared with that observed in orthoenstatite. It is found that the pressure-induced phase transitions in the two enstatites are reversible, but with different transition pressures and transition behavior. An analysis of Raman spectra has revealed that the two enstatites have different high-pressure polymorphs. This result suggests that the space group of the high-pressure polymorph of orthoenstatite is not of C2/c, and that orthoenstatite and orthoferrosilite have different transition routes at room temperature and high pressure. The compressional behavior of the high-PC2/c enstatite is also discussed according to the pressure dependences of Raman frequencies.     

非等同双原子与双模腔场拉曼相互作用模型的腔场谱

研究了非等同双原子与双模腔场拉曼相互作用模型的腔场谱,分析了谱结构随原子与腔场相对耦合常数R=g2/g1的变化规律,发现R对真空场、弱场、强场谱结构都有不同程度的影响.当R=1或R=0时,一般呈现简并的谱结构,而当R介于0与1之间时,腔场谱一般呈现复杂的非对称多峰结构.同时还发现,当R固定不变时,低频腔场初始场强对高频真空场谱结构也有较明显的影响. 关键词： 量子光学 腔场谱 拉曼相互作用 双模腔场     

CTAB对四-(4-N-甲基吡啶)卟啉SERS谱的影响

研究了阳离子表面活性剂十六烷基三甲基溴化铵 (CTAB)对四 ( 4 N 甲基吡啶 )卟啉 (H2 TMPyP)及其银配合物 (AgTMPyP)在Ag胶中的表面增强拉曼散射 (SERS)谱的影响 .SERS光谱表明 ,吸附于Ag胶粒的H2 TMPyP与衬底银原子结合形成AgTMPyP ,加入CTAB后 ,部分AgTMPyP表面络合物还原为H2 TMPyP .相似的去金属化反应也出现在AgTMPyP/Ag胶 /CTAB体系中 .CTAB的加入使SERS谱带强度明显增加 .AgTMPyP的去金属化被认为是由于CTAB的存在使Ag胶颗粒表面附近微环境发生改变     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

LDS751染料的受激喇曼散射

报道了用532nm激光抽运LDS751染料产生720—780nm可调谐染料激光输出的同时,观察到喇曼频移为102和45cm-1的反斯托克斯线,前者谱线较强,后者较弱.与这两条强线对应的斯托克斯线未能观察到.另外,还观察到喇曼频移为34cm-1的一级和二级斯托克斯线与反斯托克斯线 关键词： LDS751染料 受激喇曼散射 喇曼位移 斯托克斯线 反斯托克斯线     

Ge_x Si_(1-x)/Si超晶格中纵声学声子的喇曼散射强度研究

本文用光弹理论,在全面考虑了超晶格中两种材料的声速,质量密度和光弹常数存在差别的基础上,计算了Ge_xSi_(1-x)/Si超晶格中折迭纵声学声子的喇曼散射强度,在高达50cm~(-1)的频率范围内,理论值和实验符合得很好。     

Structural and spectroscopic studies of silylated cyclo- and bicyclosilanes

A number of cyclo-and bicyclosilanes have been prepared and structurally characterized by X-ray crystallography and Raman spectroscopy. 1,1,4,4- and 1,1,3,3-tetrakis(trimethylsilyl)octamethylcyclohexasilanes were found to exhibit unusual twist- and twisted boat-conformations. The UV absorption properties of all compounds were studied and found to show absorption maxima red shifted compared to the parent compound dodecamethylcyclohexasilane. Dedicated to Prof. Mitsuo Kira on the occasion of his reception of the Wacker Silicon Award 2005 and in recongnition of his numerous outstanding achievements in organosilicon chemistry.     

Synthesis,characterization, and electrical properties of polypyrrole/multiwalled carbon nanotube composites

Size‐controllable polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites have been synthesized by in situ chemical oxidation polymerization directed by various concentrations of cationic surfactant cetyltrimethylammonium bromide (CTAB). Raman spectra, FTIR, SEM, and TEM were used to characterize their structure and morphology. These results showed that the composites are core (MWCNT)–shell (PPy) tubular structures with the thickness of the PPy layer in the range of 20–40 nm, depending on the concentration of CTAB. Raman and FTIR spectra of the composites are almost identical to those of PPy alone. The electrical conductivities of these composites are 1–2 orders of magnitude higher than those of PPy without MWCNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6449–6457, 2006     

Characterization and electrical properties of polypyrrole/multiwalled carbon nanotube composites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of polypyrrole (PPy)/multiwalled carbon nanotube (MWNT) composites by in situ chemical oxidative polymerization. Various ratios of MWNTs, which served as hard templates, were first dispersed in aqueous solutions with the surfactant cetyltrimethylammonium bromide to form micelle/MWNT templates and overcome the difficulty of MWNTs dispersing into insoluble solutions of pyrrole monomer, and PPy was then synthesized via in situ chemical oxidative polymerization on the surface of the templates. Raman spectroscopy, Fourier transform infrared (FTIR), field‐emission scanning electron microscopy (FESEM), and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology of the fabricated composites. Structural analysis using FESEM and HRTEM showed that the PPy/MWNT composites were core (MWNT)–shell (PPy) tubular structures. Raman and FTIR spectra of the composites were almost identical to those of PPy, supporting the idea that MWNTs served as the core in the formation of a coaxial nanostructure for the composites. The conductivities of these PPy/MWNT composites were about 150% higher than those of PPy without MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1413–1418, 2006