Photocatalytic Organic Syntheses: Selective Cyclization of Amino Acids in Aqueous Suspensions

Photocatalytic reactions occurring at semiconductor particles/solution interfaces can be applied to organic syntheses. In this review article, examples of photocatalytic syntheses of cyclic amino acids by suspended semiconductor particles, e.g., titanium(IV) oxide or cadmium(II) sulfide are introduced and interpreted. Different from the photocatalytic decomposition of pollutants under aerobic conditions, selective conversion of organic compounds can be driven by the photocatalytic reactions under deaerated conditions.     

Ein neues Samariumnitridsulfid: Sm4N2S3

A New Samarium Nitride Sulfide: Sm₄N₂S₃ The oxidation of samarium with sulfur in the presence of SmCl₃ and NaN₃ as nitrogen source (molar ratio: 12:9:4:2, evacuated silica vessel, some NaCl as flux, 850°C, 7 d) yields Sm₄N₂S₃ as lath-shaped, dark red single crystals. The by-products (NaCl and NaSm₂Cl₆) are rinsed with water from the crude product. The crystal structure of Sm₄N₂S₃ (monoclinic, C2/m (no. 12), Z = 2, a = 1 318.04(12), b = 391.57(2), c = 1 031.76(9) pm, β = 130.874(6)°, R = 0.036, R_w = 0.031) contains two crystallographically different Sm³⁺, both in sixfold coordination of the anions. Besides distorted octahedra [(Sm1)N₃S₃] and [(Sm2)NS₅], tetrahedra [(N^3?)(Sm)] connected via two cis-oriented edges to form chains [N(Sm1)_3/3(Sm2)_1/1]³⁺ build up the Mayn structural feature. These are arranged in the fashion of a closest packing of rods and held together by two crystallographically different S^2? anions which take care for charge neutrality and three-dimensional interconnection.     

Chalkogenid-Disilicate der Lanthanoide vom Typ M4X3[Si2O7] (M  Ce?Er; X  S,Se)

M₄X₃[Si₂O₇]-Type Lanthanide Chalcogenide Disilicates (M ? Ce? Er; X ? S, Se) Attempts to produce single crystals of MSe₂ (or MSe^2?X) by vapour phase transport with iodine or the oxidation of MCl₂ (or MClH) with sulfur in the presence of NaCl in sealed evacuated quartz containers often yielded well-grown single crystals with the composition M₄X₃[Si₂O₇] (M ? pr, Sm, Gd, X ? Se, and M ? Nd, Er, X ? S) as by-products. The crystal structures (tetragonal, 14₁/amd (no. 141)), Z = 8, contain two crystallographically independent M₃₊ Cations that are interconnected by chalcogenide (X_2?) and disilicate anions ([Si₂O₇]^6?). (M1)³⁺ is surrounded by eight (five X^2? and three terminal O_2? of the disilicate group), (M2)³⁺ by nine (three X^2? and six terminal O^2? of the [Si₂O₇]_6? anion) chalcogenide anions. The disilicate anion itself exhibits the eclipsed conformation with non-linear Si? O? Si bridges (angles: 128 – 133°).     

Molecular structure of (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide. Synthesis of (3,5-diallylisocyanuratomethyl)phosphine sulfides

X-Ray study of the (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine oxide showed that the phosphorylmethyl group is bonded to the nitrogen atom of the cycle. Reaction of the tris(chloromethyl)phosphine sulfide with sodium diallylisocyanurate gave (3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide, and treatment of the tris(3,5-diallylisocyanuratomethyl)phosphine oxide with phosphorus pentasulfide gave a tris(3,5-diallylisocyanuratomethyl)bis(chloromethyl)phosphine sulfide.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1446–1448, August, 1993.     

Greater insight into the MTDSC technique involving fundamental sinusoidal heat flow equations

Summary Modulated temperature DSC was investigated, comparing data found experimentally to that derived from theory. Deviation from theory was found with regard to the amplitude of the modulated heat flow signal when large modulation amplitudes were employed in the experiment. These deviations were determined to be dependent on the absolute temperature and it was concluded that further investigation of the heat flow signal obtained during MTDSC experiments is required.     

Indium Mediated Conjugate Addition of Allyl Bromide to Nitroalkenes in DMF—H2O Media

Allylindium bromide prepared by metallic indium and allyl bromide was added to nitroalkenes to give conjugate addition compounds in moderate to good yields in an aqueous media.     

Structure,Chemical Bonding,and Properties of Sc2Ni2In

Sc₂Ni₂In was prepared by a reaction of the elemental components in an are furnace and subsequent annealing at 1070 K. Sc₂Ni₂In is a Pauli paramagnet and a poor metallic conductor with a specific resistivity of 224 mΩcm at room temperature. Its crystal structure was refined from X-ray powder data: P4/mbm, a = 716.79(1) pm, c = 333.154(8) pm, Z = 2, R_wp = 0.040, and R_B(I) = 0.026. Sc₂Ni₂In crystallizes with a ternary ordered version of the U₃Si₂-type structure. The nickel and indium atoms occupy [NiSc₆] trigonal prisms and [InSc₈] square prisms, respectively. These structural fragments are derived from the AlB₂ and CsCl-type structures. Semi-empirical band structure calculations reveal Sc₂Ni₂In to be a nickelide, and the strongest bonding interactions are found for the Sc? Ni contacts, followed by Sc? In and Ni? In. A rigidband model suggests the existence of the isotypic phase Sc₂Ni₂Sb.     

Decomposition of Gaseous Sulfide Compounds in Air by Pulsed Corona Discharge

The effectiveness of applying a pulsed corona discharge to the destruction of olfactory pollution in air was investigated. This paper presents a comparative study of the decomposition of three representative sulfide compounds in diluted concentrations: hydrogen sulfide (H₂S), dimethyl sulfide (DMS), and ethanethiol (C₂H₅SH), which could be completely removed when a sufficient but reasonable energy density was deposited in the gas. DMS showed the lowest energy cost (around 30 eV/molecules); C₂H₅SH and H₂S had an EC of respectively 45 eV and 115 eV. The efficiency of the non-thermal plasma process increased with decreasing the initial concentration of sulfide compounds, while the energy yield remained almost unchanged. SO₂ was the only identified byproduct of H₂S decomposition, but the sulfur balance suggests the formation of undetected SO₃. The byproducts analyzed during the degradation of DMS and C₂H₅SH enabled to propose a reaction mechanism, starting with radical attack and breaking of C–S bonds.     

Absolute line intensity measurements of hot bands for carbonyl sulfide at 12 microm

Using diode-laser spectroscopy, the intensities of 58 lines of the v(1) + v(1/2) - v(1/2) band and 36 lines of the 2v(1) - v(1) band of OCS have been measured. The corresponding band strengths S(0)(v) and the vibrational transition dipoles micro(v) have been derived through least squares fitting of these individual intensities. The band strengths values have been determined with a precision better than 2.5%.     

CdS和CdSe新型纳米结构的高效溶剂热合成

采用快速高效的溶剂热法合成了海星形CdS纳米结构和一维CdSe纳米结构。用XRD、SEM和UV-Vis等表征手段对产物进行了表征，结果表明产物为单一的CdS和CdSe纳米结构，且CdS纳米结构具有良好的分散性，其形成极大地受到pH值影响，而CdSe先形成层状的二维结构、再形成一维纳米结构。