(3,5-Diallylisocyanuratomethyl)phosphine oxides and some of their properties

Reaction of sodium diallylisocyanurate with tris(chloromethyl)-, bis(chloromethyl)phenyl-, and (chloromethyl)diphenylphosphine oxides yields, depending on the stoichiometric ratio of the reagents, mono-, bis-, and tris(3,5-diallylisocyanuratomethyl)phosphine oxides.A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Science Center, Russian Academy of Sciences, 420083 Kazan, Tatarstan, Russia. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2773–2777, December, 1992.     

New trigonal tris(phosphine oxides)

The reaction of 1,1,1-tris(chloromethyl)propane with diphenylphosphine under phase-transfer conditions afforded 1,1,1-tris(diphenylphosphinomethyl)propane, whose oxidation gave a previously unknown representative of trigonal tris(phosphine oxides), viz., stable 1,1,1-tris(diphenylphosphorylmethyl)propane. Its analogs, viz., bis(diphenylphosphoryl)diphenylphosphinomethane and tris(diphenylphosphoryl)methane, are unstable in air and decompose with the cleavage of the P-C bond.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1926–1929, September, 2004.     

PCl3- and organometallic-free synthesis of tris(2-picolyl)phosphine oxide from elemental phosphorus and 2-(chloromethyl)pyridine hydrochloride

In the superbase KOH/H₂O/toluene/phase-transfer catalyst system, 2-picolyl chloride, generated in situ from 2-(chloromethyl)pyridine hydrochloride, reacts with elemental phosphorus at 65–95?°C for 3?h to afford tris(2-picolyl)phosphine oxide in 50% yield. Single crystal X-ray analysis of the latter revealed one polymorph form of this tertiary phosphine oxide.     

Tetrakis(hydroxymethyl)phosphonium salts: Their properties,hazards and toxicities

Abstract

Tetrakis(hydroxymethyl)phosphonium chloride (THPC) and sulfate (THPS) are of importance in the textile industry as flame retardants, in the oil industry as scale-removers, as biocides for water systems, in the leather industry as tanning agents, in nanochemistry as reductants and stabilizers of nanoparticles, and as oxygen-scavengers in medical uses. In the majority of cases, THPC and THPS themselves are not chemically active and solely play a role of reservoirs for the more reactive species tris(hydroxymethyl)phosphine (THP) and/or formaldehyde. The contents of THPC/THPS solutions greatly depend on pH, which is now recognized as a key factor, for example, in metal hydrosol preparations, biocidal activity, and ecotoxicity. This review is intended to reveal and explain the complex behavior of THP and (HOCH₂)₄P⁺ salts in aqueous solutions, conditions that might lead to potential hazardous compounds such as formaldehyde, hydrogen gas, phosphine PH₃, and bis(chloromethyl)ether. Literature data on their toxicities are reviewed.     

Synthesis and Thermal Rearrangement of Tetramethyldisilane-bridged Bis(cyclopentadienyl) Diiron Complexes with Bis(phosphine)Substitution

Photolysis of [Me2SiSiMe2)[C5H4Fe(CO2)]2with a series of bis(phosphine)ligands Ph2P(CH2)n PPh2(n=1-4) leads to the formation of the corresponding diiron complexes with intramolecular and intermolecular bis(phosphine) substitution.When these complexes were heated in refluxing xylene.only in the complexes with intermolecular bis(phosphine )substitution the thermal rearrangement reaction occurred.     

Tris(2-ethylhexyl)phosphine oxide as an effective solvent mediator for constructing a serotonin-selective membrane electrode

A series of solvent mediators containing a phosphoryl (PO) group, such as tris(2-ethylhexyl)phosphate, bis(2-ethylhexyl) 2-ethylhexylphosphonate, 2-ethylhexyl bis(2-ethylhexyl)phosphinate, and tris(2-ethylhexyl)phosphine oxide, were used to construct serotonin-selective membrane electrodes. We found that replacing the alkoxy groups attached to phosphorus atoms in PO groups with alkyl groups strengthened the response of the electrode to serotonin, suppressing remarkably interference from inorganic cations, such as Na⁺. Thus, an electrode combining tris(2-ethylhexyl)phosphine oxide with an ion-exchanger, sodium tetrakis[3,5-bis(2-methoxyhexafluoro-2-propyl)phenyl]borate, gave a detection limit of 9 × 10⁻⁶ M with a slope of 55.2 mV per concentration decade in physiological saline containing 150 mM NaCl and 10 mM NaH₂PO₄/Na₂HPO₄ (pH 7.4). This is the best detection limit of any serotonin-selective electrode developed to date. The selectivity of this electrode for serotonin was over 10³ times that for inorganic cations, such as Na⁺ and K⁺, and lipophilic quaternary ammonium ions, such as acetylcholine and (C₂H₅)₄N⁺. Using the electrode, we measured the amount of serotonin released from platelets and found that the results agreed well with those obtained by a conventional fluorimetric assay of serotonin.     

Furfuryl-containing tertiary phosphine oxides and polymers based on some of them

The syntheses of dimethyl(furfuryloxymethyl)phosphine oxide (DPO), methylbis(furfuryloxymethyl)phosphine oxide (MPO), tris(furfuryloxymethyl)phosphine oxide (TPO), dimethyl(tetrahydrofurfuryloxymethyl)phosphine oxide (DTPO), methyl-bis(tetrahydrofurfuryloxymethyl)phosphine oxide (MTPO) and tris(tetrahydrofurfuryloxymethyl)phosphine oxide (TTPO) from dimethyl(chloromethyl)phosphine oxide, methyl-bis(chloromethyl)phosphine oxide, tris(chloromethyl)phosphine oxide and the furfuryl and tetrahydrofurfuryl sodium alkoxides via the Williamson reaction are reported. Phosphorus-containing furan polymers with reduced flammability are prepared by polymerizing MPO and TPO using p-toluenesulphonic acid as catalyst. The oxygen indexes of these polymers, as determined by ASTM D-2863, are 35.1 and 33.1% O₂, respectively; for the phosphorus-free polymer from difurfurylidene acetone, it is 23.0% O₂. It is shown that DPO can be used as an efficient fire-retardant for reducing the flammability of a polymer from difurfurylidenacetone.     

A new rhodium complex with a nitrogen‐containing bis(phosphine oxide) ligand as an efficient catalyst for the hydroformylation of styrene

A new rhodium complex with a nitrogen‐containing bis(phosphine oxide) ligand has been synthesized. The complex was applied to hydroformylation of styrene and displayed high activity and regioselectivity towards the branched aldehyde, which was found to be higher than those of the tertiary bis(phosphine) analogue. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and structure of bis(2-phenylethyl) phosphine selenide

Bis(2-phenylethyl)phosphine selenide was obtained with 86% yield from bis(2-phenylethyl)phosphine and selenium. XRD, IR, UV, and multinuclear NMR spectroscopic studies revealed that the phosphorus atom in the bis(2-phenylethyl)phosphine selenide molecule is four-coordinated irrespective of the phase state (crystals or solution).     

Synthesis of 1,3,4-oxazaphospholines based on phosphorylated carbamates

Addition of alcohols to bis(chloromethyl)phosphinoyl isocyanate, as well as the reaction of bis(chloromethyl)phosphinoyl chloride with urethanes or their silylated derivatives, gave the corresponding phosphorylated carbamates which undergo cyclization into 1,3,4-oxazaphospholines under the action of Et₃N. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 810–811, April, 1999.     

Stepwise phosphine sulfide formation and metal-bridging reaction of tetradentate and tridentate phosphine ligands on palladium(II)

Kinetic studies on the stepwise phosphine sulfide formation reaction of the five-coordinate trigonal-bipyramidal Pd(II) complexes with the tripodal tetradentate phosphine ligand, [PdCl(pp₃)]Cl and [Pd(4-Cltp)(pp₃)](BF₄) (pp₃ = tris[2-(diphenylphosphino)ethyl]phosphine; 4-Cltp = 4-chlorothiophenolate), were carried out, and it was revealed that the reactions proceeded via the intermediate with a pendant dissociated phosphino group. Formation of the intermediate was utilized for the bridging reaction onto Pt(II) to form the phosphine-bridged linear trinuclear and cyclic tetranuclear mixed-metal complexes. Difference in the steric conversion mechanism in the phosphine-bridging reaction between the linear tridentate phosphine (bis[2-(diphenylphosphino)ethyl]phenylphosphine) and pp₃ is also reported.     

Crystal structure of tris(chloromethyl)phosphine oxide

In the crystalline phase, tris(chloromethyl)phosphine oxide is a tgg conformer (with a transoid Cl-C-P-C-Cl chain).Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1554–1556, July, 1990.     

Rhodium-tris(3,5-bis(trifluoromethyl)phenyl)phosphine catalyzed hydroformylation of dienes to dialdehydes in supercritical carbon dioxide with high activity

Rhodium-catalyzed hydroformylation of 1,5-hexadiene and 1,7-octadiene to corresponding dialdehydes was investigated in compressed CO₂ and in toluene using different fluorinated phosphine compounds as ligands. A rhodium complex using tris(3,5-bis(trifluoromethyl)phenyl)phosphine is highly effective in compressed CO₂ for double hydroformylation of 1,5-hexadiene, whose TOF value is much larger than those reported so far. It has been shown that this ligand is effective also for the hydroformylation of 1,7-octadiene and scCO₂ is a better solvent than a conventional organic solvent of toluene for the title reaction.     

Sulfonated poly(arylene thioether phosphine oxide)s copolymers for proton exchange membrane fuel cells

High molecular weight sulfonated poly(arylene thioether phosphine oxide)s (sPATPO) with various sulfonation degrees were prepared directly by aromatic nucleophilic polycondensation of 4,4′-thiobisbenzenethiol with sulfonated bis(4-fluorophenyl) phenyl phosphine oxide and bis(4-fluorophenyl) phenyl phosphine oxide. sPATPO in the acid form with sulfonation degrees of 60–100% exhibits a glass transition temperature higher than 230 °C and a 5% weight loss temperature above 400 °C, indicating high thermal stability. sPATPO with a high sulfonation degree shows high proton conductivity and good resistance to swelling as well. For instance, sPATPO-70 displays the conductivity of 0.0783 S/cm and a swelling ratio of 11.6% at 90 °C. TEM micrographs showed that sPATPO membranes with a high sulfonation degree could form continuous ion channels, which are favorable for improving the proton conductivity but harmful to remaining the mechanical property. The membranes are expected to show good performances in fuel cell applications.     

Synthesis and transformations of acyloxy(chloromethyl)phosphonates and acyloxy(chloromethyl)phosphinates

The reactions ofO-phenyl chloromethylphosphonochloridate and bis(chloromethyl)phosphinous chloride with sodium acetate afford the corresponding acyloxyphosphonates and acyloxyphosphinates, which are readily transformed due to disproportionation into pyrophosphonates and pyrophosphinates. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp 2383–2385, November, 1998.     

Tris(4-anisyl)phosphine as an Efficient and Practical Reagent for the Synthesis of (E)-2-Benzylidenesuccinates

Condensation of maleic anhydride or dimethyl maleate with benzylaldehydes controlled by tris(4‐anisyl)‐phosphine to synthesize dimethyl (E)‐2‐benzylidenesuccinates has been systematically investigated. The protocol gives the product with high stereoselectivity in moderate to good yields under mild conditions. A plausible mechanism has been proposed.     

Quantum-chemical investigation of thermal transformations of tris(hydroxymethyl)phosphine

In keeping with the calculations of thermodynamic characteristics of possible transformations of tris(hydroxymethyl)phosphine in the framework of DFT-approach using hybrid exchange-correlation functional B3LYP with the basis 6–311++G** the probability of transformation of tris(hydroxymethyl)phosphine at the temperature below 350 K into methylbis(hydroxymethyl)phosphine oxide is higher than the conversion into methyl(hydroxymethyl)phosphine oxide, and at the temperature over 350 K the trend is opposite. The probability of the formation of a heterocyclic dimer at the temperature over 300 K is somewhat lower and of bis(hydroxymethyl)phosphine in the temperature range 250–550 K is significantly lower.     

One-pot synthesis of ultra-branched mixed tetradentate tripodal phosphines and phosphine chalcogenides

Ultra-branched mixed tetradentate tripodal phosphines and phosphine chalcogenides have been synthesized by the exhaustive regioselective addition of secondary phosphines, phosphine sulfides and phosphine selenides to available tris(4-vinylbenzyl)phosphine oxide under free-radical conditions (UV irradiation or AIBN) in good to excellent yields.     

Thermal rearrangement of bis(hydroxymethyl)phosphines as a way to P-chiral phosphine oxides

Bis(hydroxymethyl)(2-pyridyl)- and bis(hydroxymethyl)-[(2-pyridyl)ethyl]phosphines on heating to 180 °C undergorearrangement leading to racemic P-chiral tertiary P-methyl-P-(hydroxymethyl)-containing phosphine oxides. The spontaneous self-resolution of these enantiomer mixtures during the crystallization was demonstrated.     

Synthesis and characterization of sulfonated poly(phthalazinone ether phosphine oxide)s by direct polycondensation for proton exchange membranes

A series of sulfonated poly(phthalazinone ether phosphine oxide)s (sPPEPO) were prepared via aromatic nucleophilic substitution polycondensation of 4‐(4‐hydroxyphenyl) phthalazinone (HPPZ) with sulfonated bis(4‐fluorophenyl)phenyl phosphine oxide (sBFPPO) and bis(4‐fluorophenyl)phenyl phosphine oxide (BFPPO) at various ratios. The properties such as molecular weight, ion exchange capacity (IEC), swelling, thermal stability, proton conductivity, and morphology were investigated. sPPEPO with high IEC exhibited high proton conductivity while they still showed low swelling. Typically, sPPEPO with IEC of 1.54 and 1.69 meq/g exhibited high conductivity of 0.091 and 0.19 S/cm, and low swelling ratios of 14.3% and 19.5% at 80 °C, respectively. The low swelling was attributed to the strong intermolecular interaction including the electrostatic force and hydrogen bond. sPPEPO would be promising candidates used as polyelectrolyte membranes for fuel cells. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1758–1769, 2008