In-situ thermal crosslinked PA66/β-cyclodextrin/PA66 nanofibrous membranes with high mechanical strength for removal of heavy metal ions by flow through adsorption

β-cyclodextrin (β-CD) based materials have been studied widely as adsorbents and filter membranes for removing pollutants in air or water applications. The present study aimed to develop a sandwich structure of eletrospun nanofibrous membrane based on β-cyclodextrin and PA66 to achieve the high mechanical strength and flow-through adsorption of heavy metal ions in water. The surface and cross section morphology of PA66/β-cyclodextrin/PA66 nanofibrous membranes (PA66/β-CD/PA66 NMs) were examined using scanning electron microscopy (SEM). The physicochemical and mechanical properties of PA66/β-CD/PA66 NMs were analyzed by differential scanning calorimetry (DSC), thermogravimetric (TG) analysis and universal testing machine. The diameter of β-CD and PA66 electrospun fibers are 300–400 nm and 20–40 nm respectively. PA66/β-CD/PA66 NMs show a loosely arranged fibers and layer by layer structure. The tensile strength increases remarkably for PA66/β-CD/PA66 NMs, from 1.33 MPa of β-CD NMs to 23.17 MPa and the Young's modulus increases from 34.8 MPa to 253.3 MPa. The mechanical behavior of PA66/β-CD/PA66 NMs is a typical brittle fracture, and its microcosmic fracture diagrams are also involved. TGA/DSC results confirm the thermal crosslinking reaction is effective and complete. On the basis of SEM, DSC, TG and mechanical behavior analysis results, the molecular mechanism of in situ thermal crosslinking reaction is discussed. Fe³⁺、Ni²⁺ were used to confirm the ability to absorb heavy metal ions of PA66/β-CD/PA66 NMs. In conclusion, PA66/β-CD/PA66 NMs could be a promising solution for removal of metal ions by flow-through adsorption.     

Atomistic Insight Into the Host–Guest Interaction of a Photoresponsive Metal–Organic Framework

Photoresponsive functional materials have gained increasing attention due to their externally tunable properties. Molecular switches embedded in these materials enable the control of phenomena at the atomic level by light. Metal–organic frameworks (MOFs) provide a versatile platform to immobilize these photoresponsive units within defined molecular environments to optimize the intended functionality. For the application of these photoresponsive MOFs (pho-MOFs), it is crucial to understand the influence of the switching state on the host–guest interaction. Therefore, we present a detailed insight into the impact of molecular switching on the intermolecular interactions. By performing atomistic simulations, we revealed that due to different interactions of the guest molecules with the two isomeric states of an azobenzene-functionalized MOF, both the adsorption sites and the orientation of the molecules within the pores are modulated. By shedding light on the host–guest interaction, our study highlights the unique potential of pho-MOFs to tailor molecular interaction by light.     

高碳铬铁在氢氧化钠水溶液中电化学氧化过程

铬铁电化学氧化法是一种新的制备铬酸钠的方法,然而高碳铬铁在NaOH水溶液中的电化学氧化过程尚不明确。 采用循环伏安法(CV)、稳态极化法(LSV)等电化学测试方法对金属铬、高碳铬铁在NaOH水溶液中的电化学氧化过程进行研究,通过扫描电子显微镜(SEM)、能量散射谱(EDS)和X射线光电子能谱(XPS)对高碳铬铁电解后固相产物表征,判断固相产物的组成。 结果表明,高碳铬铁不同于金属铬的电氧化过程,它在NaOH溶液中通过Cr(0)→Cr(Ⅵ)的电氧化方式生成铬酸钠,中间产物Cr(OH)₃和Fe(0)发生电化学反应生成稳定的FeCr₂O₄。 随着NaOH浓度的增加,电势较低时,受高碳铬铁中Fe(0)的影响,高碳铬铁容易在NaOH水溶液中发生钝化;当电势足够正时,钝化膜溶解,生成铬酸钠、氢氧化铁和亚铬酸亚铁,同时,阳极表面有氧气析出。 高碳铬铁电化学氧化制备铬酸钠的适宜条件:碱浓度≥2 mol/L,阳极电势≥1.6 V(vs.SCE)。     

“非保护型”金属胶体纳米簇形成机理研究

碱-乙二醇法制备的"非保护型"金属及合金纳米簇由表面吸附的溶剂分子和简单离子实现稳定化,它们被广泛用于制备高性能复相催化剂和研究复相催化剂中的尺寸、组成、载体表面基团以及修饰剂对催化性能的影响。关于此类非保护金属纳米簇的形成过程及机理的认识尚有待进一步深化。本文采用原位快速扫描X射线吸收精细结构谱(QXAFS)、原位紫外-可见(UV-Vis)吸收光谱、透射电子显微镜和动态光散射技术研究了碱-乙二醇法合成中非保护型金属胶体纳米簇的形成过程与机理。结果表明,在碱-乙二醇法合成非保护型Pt金属纳米簇的过程中,室温下即有部分Pt(IV)被还原至Pt(II)。随着反应温度的升高,OH-逐渐取代与Pt离子配位的Cl-,在Pt―Pt键形成之前,反应体系的UV-Vis吸收光谱中可观察到明显的纳米粒子的散射信号,原位QXAFS分析表明Pt纳米簇是由Pt氧化物纳米粒子还原所形成的;在Ru金属纳米簇的形成过程中,OH-首先取代了Ru Cl_3中的Cl~-,形成羟基配合物Ru(OH) _6~(3-),后者进一步缩合形成氧化钌纳米粒子,最终Ru金属纳米簇由乙二醇还原氧化钌纳米粒子形成。由于先形成了氧化物纳米粒子,后续的还原反应被限制在氧化物纳米粒子内,使最终得到的非保护型金属纳米簇具有尺寸小、分布窄的特点。本工作所获得的知识对发展高性能能源转化催化剂、精细化学合成催化剂、传感器等功能体系具有重要意义。     

三元Ho3+-TiO2/Bi等离子体复合纤维制备及其可见光催化产氢性能

以电纺Ho³⁺-TiO₂纳米纤维为基质,葡萄糖酸钠为还原剂,采用水热法制备Ho³⁺-TiO₂/Bi等离子体复合纤维光催化剂。 利用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)和瞬时光电流(IP)等分析测试手段对样品的物相、形貌和光电性能等进行表征。 以三乙醇胺为电子给体,研究了Ho³⁺-TiO₂/Bi光催化分解水产氢的反应过程。 结果表明:在水热过程中,Bi³⁺被葡萄糖酸钠还原成单质Bi纳米颗粒,复合在Ho³⁺-TiO₂纳米纤维表面形成肖特基结。 金属Bi通过局域表面等离子体共振效应结合稀土元素丰富的能级结构和4f电子跃迁特性,对TiO₂进行双重修饰改性,有效提高了TiO₂的光催化活性和稳定性,可见光下产氢速率最大为43.6 μmol/(g·h)。     

金属硫化物在可充电电池中的研究进展

低成本、长寿命、高安全性、高性能且易于大规模生产的锂/钠离子电池已被证实为重要的二次储能设备。 电极材料对锂/钠电池性能与循环寿命影响极大,金属硫化物由于具有高比容量和低电势而极具潜力成为锂/钠离子电池负极材料。 在电化学循环过程中,由于金属硫化物容易产生穿梭效应和体积变化,从而电极材料结构被破坏,进一步导致电池容量衰退、稳定性降低。 本文总结了多种金属硫化物的微观结构调控策略,从三维空间构建到与其它材料的复合,增强了电极的导电性和减缓体积变化带来的负面影响,进而获得性能优异的金属硫化物负极材料。 通过对金属硫化物的结构与性能的讨论,对其研究前景进行了积极的展望。     

一个各向异性磁稀释杂化钙钛矿系列[CH3NH3][CoxZn1-x(HCOO)3]

Inorganic-organic or hybrid perovskite materials, which are the complementary counterparts of pure inorganic perovskites, can provide many new opportunities in the researches of phase transitions, critical phenomena, and relevant properties, as they combine the characteristics of inorganic and organic components. Therefore, the hybrid perovskites of ammonium metal formate framework are very promising, and their properties have been found to be strongly dependent on the characteristics of the constituent metal ions and/or ammonium ions. Herein, we used solid solution strategies, borrowed from solid state chemistry, to investigate the anisotropic diluted magnetic hybrid perovskite system of [CH₃NH₃][Co_xZn_1-x(HCOO)₃], wherein the B-sites are occupied by the mixed metal ions of Co²⁺ and Zn²⁺. The solid solution compounds of this series in the range x = 0–1 (or the molar percent Co% = 0–100%) were successfully prepared using conventional solution chemistry methods. The resulting compounds were demonstrated to be iso-structural by using both single-crystal and powder X-ray diffraction analyses. The solid solution crystals belong to the orthorhombic space group Pnma, with the cell parameters being a = 8.3015(2)–8.3207(3) Å, b = 11.6574(4)–11.6811(5) Å, c = 8.1315(3)–8.1427(4) Å, and V = 787.89(5)–790.98(7) ų. The perovskite structure consists of a simple cubic anionic metal-formate framework and CH₃NH₃⁺ cations which are located in the framework cavities, with N―H···O hydrogen bonds formed between the framework and the cation. The members of this series showed negligible changes (< 0.4%) in their respective lattice and structural parameters. Thus, the prepared solid solution compounds constitute good molecule-based examples for the study of magnetic dilution under almost the same structural parameters and molecular geometries. Upon dilution, the magnetization per mole of Co at low temperatures and low fields was suppressed by the magnetic anisotropy of Co²⁺ and gradual destruction of the large spin canting between coupled Co²⁺ ions, in contrast to the magnetization enhancement observed in the isotropic diluted system of [CH₃NH₃][Mn_xZn_1-x(HCOO)₃] with the same perovskite structure. The percolation limit was estimated as (Co%)_P = 27(1)% (or x_P = 0.27(1)) from the magnetic data, which was slightly lower than that predicted by the percolation theory for a simple cubic lattice (31%); this trend was due to the strong magnetic anisotropy of the present system. In addition, rare incommensurate phase transitions were primarily detected below ~120 K for the pure Co and Zn members, which may also affect the magnetic properties of the materials.     

钛酸锶光催化剂的改性研究进展

钛酸锶（SrTiO3）光催化剂是一种钙钛矿型三元氧化物,具有较强的氧化还原能力、良好的物理化学稳定性及环境友好等特点,在光催化各领域得到了广泛应用,如制氢/降解/光电催化等。SrTiO3对太阳光的利用率较低,且其本征光催化活性受光生载流子分离效率等因素限制,阻碍了实际应用。针对以上问题,将围绕国内外SrTiO3改性研究的现状进行综述,主要从掺杂、负载、复合改性等方面进行陈述。最后,对高效稳定SrTiO3光催化剂的未来发展趋势进行展望。     

炭材料负载金属催化剂催化硅氢加成反应进展

炭材料具有比表面积大、孔径可调、取材广泛等优点,以其为载体负载金属活性组分制备硅氢加成催化剂极具发展前景.我们详细总结了近20年不同炭材料如活性炭、石墨与石墨烯、碳纳米管、富勒烯、卡宾等在硅氢加成反应中负载金属催化剂的制备方法、催化性能以及可能的催化机理,并对有望应用到该反应的新型炭材料载体进行了对比与展望.认为未来硅氢加成炭负载型催化剂的研究可聚焦于(1)探寻新型双金属活性组分以进一步提高催化活性;(2)研发更具优势的金属配体,明晰配体与载体、配体与金属之间的相互作用关系以提高催化选择性与稳定性;(3)结合科学可靠的催化机理研究,以期研发出更符合可持续发展要求的炭负载型硅氢加成金属催化剂,可使硅氢加成反应基本实现原子经济性.     

两种表征核酸适配体-靶蛋白亲和作用的毛细管电泳方法比较

适配体-靶分子间的亲和作用表征是理解和应用核酸适配体发挥特异亲和作用的基本前提,CE技术则为上述表征提供了多模式的简捷途径,但多种模式体系间的结果往往存在差异,导致CE亲和评价可靠性和进一步应用受到限制,亟须建立多CE方法测定适配体-靶分子间亲和作用的系统比较研究。该研究以凝血酶及其特异性作用于肝素结合位点的适配体29mer为模型体系,基于CE-激光诱导荧光检测,引入CE-迎头分析（FA）评价方法,并比较其与预平衡-毛细管区带电泳（PE-CZE）的异同。首先进行了CE-FA方法分离条件的优化,37 ℃、0.5 h孵育完全后进样,进样时间为30 s,在较低工作温度（15 ℃）、较短毛细管长度（30 cm）及生物相容性好的缓冲体系2×TG（Tris-甘氨酸缓冲液,pH 8.5）条件下,经15 kV分离时,得到了稳定的荧光标记29mer（F29mer）-凝血酶复合物及游离F29mer平台峰。加入1 g/L牛血清白蛋白（BSA）,有效提高了CE-FA平台峰高及迁移时间的重复性。详细讨论了两种方法下6种拟合方式的结果及特点。针对CE-FA和PE-CZE法,以结合适配体/游离适配体的浓度比对游离适配体浓度非线性拟合、平台峰高变化对浓度间的非线性拟合、平衡混合物的非平衡CE（NECEEM）计算等进行拟合。结果表明,6种拟合结果中5种不存在显著性差异,得到的解离常数（K_d）值均介于24~64 nmol/L范围。CE-FA法中的3种拟合结果符合度较好,说明CE-FA法易于在非平衡的CE分离体系下保持适配体-复合物间的结合-解离平衡,所测得K_d准确度较高。PE-CZE法中,借由降低的游离F29mer峰高对凝血酶浓度间的非线性拟合所得K_d值偏差过大;选择凝血酶浓度为F29mer浓度的0.5~2倍,且观察到明显的两峰间"指数桥"为前提,可经NECEEM法进行数据计算求解得到较为准确的K_d值。CE-FA法可与PE-CZE法互为印证,提高了亲和作用评价的可靠性。首选推荐使用多浓度平台峰高变化进行非线性拟合的CE-FA法,可相对有效克服高压电场对复合物稳定性的影响,具有适用范围广、方法稳定、结果拟合简便准确等特点。