Measurement of water by oven evaporation using a novel oven design. 2. Water in motor oils and motor oil additives

The measurement of water in lubricating oils is important because water accelerates the corrosion of metal parts and bearings in motors. Some of the additives added to lubricating oils to improve their performance react with the Karl Fischer reagent (KFR) causing a positive bias in the water measurement. A new oven evaporation technique for measuring water in oils has been developed that is automated, requires less sample handling, is easily calibrated, and is capable of measuring relatively small mass fractions of water (50 mg/kg sample). A series of motor oils was analyzed with the standard KFR, a reagent that detects interfering substances that reduce iodine, and the aldehyde–ketone reagent that does not detect substances that react with methanol and form water. The oil samples were heated to 107°C and then reheated to 160°C. At both temperatures, material was measured by both KFRs, but only zinc dithiophosphate released sulfur compounds that would react with the reagent that detects interfering substances. Mass fractions of between 20 and 70% of the volatile material released at either temperature were measured with the standard KFR but not with the aldehyde–ketone reagent. These results demonstrate that there are a number of sources of positive bias in the measurement of water in motor oils and that the standard KFR cannot be used to measure water in motor oils and motor oil additives. These results also indicate that some of the material reacts with methanol to form water. Finally, these results suggest that some of the material that is volatile at 160°C and not at 107°C may be water that is physically occluded or may be substances that react with diethyleneglycol monomethylether to produce water.     

转换移动窗口因子分析法用于中药组合前后成分变化分析

以正十四烷为内标,采用气相色谱-质谱(GC/MS)联用技术对中药甘草(GUF)、甘遂(EKL)单味药材,以及其组成的药对(GUF-EKL)的挥发成分进行测定,基于一种新的化学计量学方法——转换移动窗口因子分析法(AMWFA)和直观推导式演进特征投影法(HELP)对产生的二维色谱/质谱数据同时进行分辨和解析,获取各个组分的纯色谱曲线和质谱,根据分辨得到的纯质谱在质谱库中进行相似检索以实现对组分的定性。利用AMWFA对组合前后的成分进行归属分析,然后采用面积归一法进行定量。分别在甘草、甘遂及其药对中鉴定出52、51和63个成分,占各自挥发油成分的84%、90%和75%。     

重质石油中含氮化合物的形态及分布分析──高效液相色谱－气相色谱在线联用分析方法研究

研究了高效液相色谱－气相色谱（ＨＰＬＣ－ＧＣ）联用技术及其应用。采用正相微柱ＨＰＬＣ－ＧＣ联用及完全溶剂蒸发方式，分析了煤焦油馏分──蒽油，显示了微柱ＨＰＬＣ－ＧＣ联用的应用潜力。采用正相ＨＰＬＣ－ＧＣ联用结合反冲技术，分离了重质石油中的饱和烃、芳烃和极性化合物（含氮化合物等）。     

川桂皮挥发油的化学组成

采用GC－MS技术分析了川桂（Cinnamomum wilsonii）皮挥发油的化学组成，共确定了其中42种化学成分与相对含量，占总组分相对含量的94．14％，其中有40种为萜类或其衍生物；研究结果显示，川桂皮油的主要成分为桉油素（11．02％），1（10），4－杜松二烯（10．21％），乙酸异龙脑酯（6．30％），杜松醇（5．53％），桉叶油醇（5．34％）等，与该植物叶和同属药用植物肉桂皮挥发油的主要组成均差别较大。     

大豆油树脂基泡沫塑料的力学性能与生物降解性研究

用丙烯酸酯化环氧大豆油(AESO)和甲基丙烯酸甲酯(MMA)经自由基共聚合制得一种新型的植物油基泡沫塑料.对AESO/MMA泡沫塑料的压缩性能的各种影响因素进行了细致研究,结果表明,所得泡沫塑料的压缩性能取决于AESO/MMA的比例、引发剂和促进剂的浓度.AESO泡沫塑料具有与传统不饱和聚酯泡沫塑料相似的压缩强度,而且比后者具有更高的韧性,同时这类植物油基泡沫塑料有着良好的生物降解性.     

Hydrodistillation–Solvent Microextraction and GC–MS Identification of Volatile Components of Artemisia aucheri

A new, simple hydrodistillation–solvent microextraction (HD–SME) technique has been used for analysis of the volatile components of the aerial parts of Artemisia aucheri. The components were collected in a single microdrop, and this was injected directly for gas chromatographic–mass spectrometric (GC–MS) analysis. The effects on extraction efficiency of extraction solvent, sample mass, microdrop volume, and extraction time were optimized by use of a simplex method. The identities of the components of HD–SME extracts were confirmed according to their retention indexes and mass spectra with those of standards. Forty components were extracted and identified by use of the method; 1,8-cineol (22.8%), chrysanthenone (18.16%), α-pinene (8.33%), and mesitylene (7.41%) were the major constituents. The results obtained from the microextraction method were compared with those obtained by conventional hydrodistillation.     

Bio‐based copolymers obtained through miniemulsion copolymerization of methyl esters of acrylated fatty acids and styrene

Polymers based on renewable sources are promising materials, and can find many uses in coatings and adhesive applications. The goal of this work was to synthesize and characterize bio‐based styrene/acrylated fatty acid methyl ester (AFAME) copolymer—poly(styrene‐co‐AFAME) prepared by miniemulsion polymerization. The main strategy adopted was to functionalize the bio‐monomer with acrylic acid that was confirmed by ¹H NMR and FTIR measurements, to allow its free‐radical homo‐ or copolymerization with styrene. Poly(styrene‐co‐AFAME) with different AFAME content were obtained and their composition were evaluated by ¹H NMR. Dynamic light scattering measurements throughout the reactions have indicated a very stable colloidal systems and average particles size ranges 100–150 nm. The structural and physical properties of poly(styrene‐co‐AFAME) were investigated by DTG‐DTA, DSC which displayed a decreasing of glass transition temperature with increase of AFAME content. The results showed in this study have indicated that the poly(styrene‐co‐AFAME) can be used in several fields because their characteristics are totally distinct. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1422–1432     

油液颗粒污染检测仪的研制

研制了油液颗粒污染检测仪。采用高压注射泵取样系统控制取样精度,通过激光电源恒流控制电路设计提高了遮光原理颗粒计数传感器的稳定性。油基颗粒计数标准物质校准和比对测试结果表明,研制的油液颗粒污染检测仪的测试重复性和准确性达到国外同类仪器水平。     

熔盐热裂解大豆油的特性研究

以大豆油为原料,在ZnCl₂-KCl熔融盐体系中考察了进料速量、载气流量、反应温度及进料量对其热裂解的影响。采用气相色谱-质谱联用仪(GC-MS)表征生物油组成。结果表明,进料速量和载气流量主要通过改变大豆油的反应停留时间影响裂解效果。当进料速率为1.2 g/min及不通载气时,大豆油停留时间较长,裂解较充分;随着温度升高,生物油得率增大,含氧化合物含量及酸值上升;随着进料量增大,生物油得率稳定在70%左右,但脱羧效果有所下降。经过催化加氢,生物油性质得到了明显的改善,组分分布与0^#柴油分布大体相似。     

Using a fully coupled flow and geomechanical simulator to model injection into heavy oil reservoirs

In this paper, the geomechanical factors that may affect injection processes in heavy oil recovery are investigated. To accurately capture the geomechanical effects, we employed a numerical formulation that allows fully coupling of nonlinear geomechanical deformation and multicomponent porous media flows. Two salient features of this new coupling formulation are the following: (1) all flow and geomechanical equations are solved implicitly in one single matrix equation, and (2) it allows reuse of matrices from both a traditional fully implicit multicomponent reservoir simulator and a nonlinear geomechanics simulator. The former feature ensures stable coupling between the reservoir flow and geomechanics, and the latter significantly reduces the programming work. Numerical examples are given to demonstrate the accuracy and convergence performance of the new formulation. The proposed formulation is then applied to model injection into heavy oil reservoirs. The numerical investigation revealed that geomechanical factors, such as in situ stress anisotropy and the uneven deformation of reservoir rock and attached impermeable rock, can result in skewed or nonuniform plastic strain and, hence, alter the sweep of the injected fluid. Coupled geomechanics simulation also gives rather different transient pressure response from that of uncoupled simulation. Copyright © 2012 John Wiley & Sons, Ltd.