Optimized Method for the Determination of Prednisolone, Zn-Bacitracin and Phenylephrine in Local Pharmaceutical Preparations by Micellar Electrokinetic Capillary Chromatography

Summary A new, rapid and simple method is described and applied to resolve and quantify mixtures of prednisolone, Zn-bacitracin and phenylephrine. The determination was accomplished by MEKC. The separation was carried out at 25 °C and 30 kV, using a 5 mM phosphate-5 mM borate buffer (pH=8.2), 40 mM SDS as background electrolyte. Under these conditions, the run time was 6.6 min and the limits of quantification were about 1.0 mg L^–1 for every component. Repeatability and reproducibility studies were achieved showing no significant differences at 95% confidence level. The MEKC method has been applied for quantifying these compounds in different commercials pharmaceuticals products, without separations steps.     

Synthesis and luminescence properties of lanthanide(III) chelates with polyacid derivatives of thienyl-substituted terpyridine analogues

Two new polyacid derivative ligands of thienyl-substituted terpyridine analogues, N,N,N¹,N¹-[4′-(2?-thienyl)-2,2′:6′,2″-terpyridine-6,6″-diyl]bis(methylenenitrilo) tetrakis(acetic acid) (TTTA) and N,N,N¹,N¹-[2,6-bis(3′-aminomethyl-1′-pyrazolyl)-4-(2″-thienyl)pyridine] tetrakis(acetic acid) (BTTA), were synthesized, and the luminescence properties of their Eu³⁺ and Tb³⁺ chelates were investigated. The Eu³⁺chelates of the two ligands are strongly luminescent having luminescence quantum yields of 0.150 (TTTA-Eu³⁺) and 0.114 (BTTA-Eu³⁺), and lifetimes of 1.284 ms (TTTA-Eu³⁺) and 1.352 ms (BTTA-Eu³⁺), whereas their Tb³⁺ chelates are weakly luminescent. The TTTA-Eu³⁺ chelate was used for streptavidin (SA) labeling, and the labeled SA was used for time-resolved fluoroimmunoassay of insulin in human sera. The method gives the detection limits of 33 pg ml⁻¹.     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

Simultaneous Determination of Carbamate and Organophosphorus Pesticides in Honeybees by Liquid Chromatography-Mass Spectrometry

Summary The potential of liquid chromatography-mass spectrometry (LC-MS) has been studied for the simultaneous determination of sixteen carbamate and organophosphorus pesticides in honeybees using a traditional sample preparation protocol based on acetone extraction and dichloromethane partitioning. The performances of both atmospheric pressure chemical ionization (APCI) and electrospray (ES) interfaces were compared. APCI offered better sensitivity and specificity for a higher range of pesticides. Limits of quantification were from 0.01 to 0.17 mg kg^–1, at which recoveries obtained were between 64 and 93%, except for pirimicarb that was at 13%, with relative standard deviations ranging from 7 to 20%. Fenitrothion, fenoxycarb, methiocarb and phoxim were found in bees from Valencian Community beehives at concentrations between 0.03 and 3.75 mg kg^–1.     

溶膜预富集-石墨炉原子吸收法测定痕量钯

强酸性条件下 ,钯 (Ⅱ )与 5 [( 5 氯 2 吡啶 )偶氮 ] 2 ,4 二氨基甲苯 ( 5 Cl PADAT)生成紫红色螯合物 ,该螯合物可与十二烷基苯磺酸钠 (SDBS)生成离子缔合物 ,离子缔合物经 0 .3μm孔径的硝化纤维微孔滤膜富集后 ,于小体积 ( 0 .5mL)的浓硫酸中溶膜 ,用石墨炉原子吸收法 (GFAAS)测定 ,富集倍数可达 2 0 0倍 ,钯含量在 4.69× 1 0 - 1 2 ～ 7.0 9× 1 0 - 9mol/L范围内线性良好 ,检出限为 1 .78×1 0 - 1 2 mol/L。方法用于海水中痕量钯的测定。     

N[a,b]类中边界Nevanlinna-Pick插值(I)

用所谓的Hankel向量方法求解N[a,b]函数类中带边界插值数据的Nevanlina-Pick插值(BNP(N[a,b]))问题,并建立BNP(N[a,b])问题与[a,b]上的某种带约束条件的Hausdorff矩量问题之间等价的可解条件以及解之间明确的一一对应关系.这使得当BNP(N[a,b])问题有多解时,能通过带约束条件的矩量问题的可解性准则和解获得BNP(N[a,b])问题的可解性准则和解的参数化描述,而在唯一解的情况下,通过BNP(N[a,b])问题解的存在唯一性准则和唯一解来获得带约束条件的     

Analysis of a Multiserver Queue with Setup Times

This paper deals with the analysis of an M/M/c queueing system with setup times. This queueing model captures the major characteristics of phenomena occurring in production when the system consists in a set of machines monitored by a single operator. We carry out an extensive analysis of the system including limiting distribution of the system state, waiting time analysis, busy period and maximum queue length. AMS subject classification: 90B22, 60K25     

Fe(phen)32+与DNA作用的荧光光度法研究

为了考察金属配合物Fe(phen)32+与DNA 的作用模式, 应用荧光光度法对Fe(phen)32+与DNA及DNA-EB的作用进行了研究,结果表明Fe(phen)32+是主要以共轭平面插入形式与DNA作用的, 并计算出稳定常数等一系列热力学数据.     

A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.