钙钛矿型CO氧化催化剂耐SO2中毒性质的研究

钙钛矿型ＣＯ氧化催化剂耐ＳＯ２中毒性质的研究马春曦王宝辉（大庆石油学院石油化工系安达１５１４００）关键词钙钛矿型催化剂一氧化碳氧化硫中毒近年来，人们对钙钛矿型复合物ＣＯ氧化催化剂作了大量研究，证明其具有很高的ＣＯ氧化活性［１－３］，并开始尝试应用于汽...     

TS分子筛催化性能研究Ⅰ．TS－2分子筛催化1，2－丙二醇液相氧化反应的研究

ＴＳ分子筛催化性能研究Ⅰ．ＴＳ－２分子筛催化１，２－丙二醇液相氧化反应的研究①伏再辉尹笃林（湖南师范大学精细催化合成研究所，长沙４１００８１）关键词ＴＳ－２分子筛１，２－丙二醇氧化催化氧化自１９８３年Ｔａｒａｍａｓｓｏ［１］首次合成具有ＺＳＭ－５结构...     

Cu，Pd－ZSM－5上NO分解和CO氧化的催化作用

双交换Ｃｕ，ｐｄ－ＺＳＭ－５催化剂（Ｃｕ交换度为１０５％，Ｐｄ交换度分别为３．４％和３３％）对ＣＯ氧化反应有活性增强作用，对ＮＯ分解反应不存在增强效应．双交换催化剂在于交换程序不同，而表面物种不同，活性组分的分布状态不同，因而有不同的活性．先交换Ｃｕ，４００℃焙烧后再交换ｐｄ的Ｃｕ－Ｐｄ－ＺＳＭ－５催化剂，对上述两类反应的活性存双组分催化剂中均为最高．Ｈ_２－ＴＰＲ谱表明，共交换的Ｃｕ－Ｐｄ－ＺＳＭ－５中尚有部分ＣｕＣｌ＋占据了部分交换位置，而使ＣＯ氧化活性稍有下降．Ｎ_２－ＤＴＡ和Ｈ_２－ＴＰＲ谱结果表明，Ｐｄ交换到Ｃｕ－ＺＳＭ－５中后，抑制了吸附水和水合铜化合物的形成，由此提高了在２００—３００℃时氧的吸附量．后者的大小和ＣＯ氧化活性有顺变关系．Ｎ_２－ＤＴＡ谱中３４０—４４５℃的放热峰可能分别表征了和ＮＯ分解活性有关的铜氧桥或把氧桥的形成，该放热峰的峰温愈低，峰面积愈大，则ＮＯ分解活性愈高．     

钙钛矿型La_((1 x)/2)Sr_((1-x)/2)Co_(1-x)Cu_xO_3催化CO氧化活性与表征

研究了钙钛矿型LaSrCoCu_xO_3催化剂对CO氧化反应的催化活性及其表面氧的催化作用．结果表明，x＝0．4的催化剂对CO氧化具有最高催化活性，常压及本实验条件下CO完全氧化的最低温度为168℃；催化剂均为氧缺陷化合物，吸附于表面晶格氧缺陷上的吸附氧是CO氧化反应的活性氧物种；并发现催化剂中存在有非常价态的C04 ，认为CO氧化反应是通过吸附氧调变Co3 和Co4 价态而进行．     

甲苯气相选择性氧化制苯甲醛 Ⅰ．V_2O_5／TiO_2－Al_2O_3催化剂研究

制备了一系列负载型Ｖ－Ｔｉ－Ａｌ－Ｏ催化剂并用于甲苯的气相选择性氧化制苯甲醛，考察了接触时间、氧浓度、Ｖ２Ｏ５负载量以及催化剂焙烧温度对反应性能的影响。用ＴＰＲ、ＸＲＤ和ＢＥＴ等测试手段，对催化剂进行了表征。研究发现，催化剂在７７３Ｋ时活化，接触时间１．２秒，氧浓度２１％时，可获得较好的反应结果，Ｖ２Ｏ５负载量为６（ｗｔ）％的催化剂，在５９３Ｋ时反应，得到了转化率２０．５％，苯甲醛产率８．３％的最好结果。     

Composition catalysts of ethylbenzene oxidation based on bis(acetylacetonato)nickel(ii) and phase transfer catalysts as ligands 1. Macrocyclic polyethers

The addition of the macrocyclic polyether 18-Crown-6 (18C6) increases the selectivity of oxidation of ethylbenzene to -phenylethylhydroperoxide (PEH) in the presence of Ni(acac)₂. The initial oxidation rate, selectivity and degree of conversion of ethylbenzene to PEH are greater than those catalyzed by Ni(acac)₂ only. The efficiency of the macrocyclic ligand as an activator of Ni(acac)₂ exceeds that of monodentate donor ligands. The high selectivity of the process is due to both the primary Ni(acac)₂ · 18C6 complexes and the products of their transformation in the course of oxidation. The mechanism of ethylbenzene oxidation catalyzed by Ni(acac)₂ · 18C6 complexes is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1406–1411, August, 1994.     

2-Quinazolylguanidines in Heterocyclization Reactions. 2. Condensation with α,β-Unsaturated Carbonyl Compounds

4,6,6-Trimethyl-1,4-dihydropyrimidines have been synthesized by condensation of 2-quinazolylguanidines with mesityl oxide. The analogous reaction with benzalacetone leads to unstable 4-methyl-6-phenyl-1,4-dihydropyrimidines, which are oxidized to the corresponding 4-methyl-6-phenylpyrimidines.     

Hydrogen Oxidation on a Platinum Microelectrode: Effect of Carbon Monoxide Impurities

The kinetics of the hydrogen oxidation and the CO adsorption on a Pt (ultra)microelectrode is studied in a 0.5 M H₂SO₄ solution saturated with a mixture of gaseous H₂ and CO at partial CO pressures p _CO = 10–500 ppm. The balance between rates of diffusion and adsorption of CO at different adsorption times is studied. Studied is the effect of CO impurities in H₂ on steady-state polarization curves for the hydrogen ionization and nonsteady-state curves of the oxidation current decay with time at 0.02–0.05 V. Conditions under which in a certain time interval and at a certain CO concentration the slope of an I vs. t curve is proportional to p _CO are determined. The obtained dependence may be used when designing a technique for monitoring CO impurities in technical hydrogen.     

Oxidation of 2-dialkylaminomethyl-4,6-di-tert-butylphenols

Oxidative transformations of 2-dialkylaminomethyl-4,6-di-tert-butylphenols depend on the nature of the oxidant, the character of the substituents at the nitrogen atom, and the medium. A mechanism of the oxidation of these compounds is suggested. The molecular structure of the compound obtained as a result of oxidative trimerization of 2-dimethylaminomethyl-4,6-di-tert-butylphenol was established by X-ray structural analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1328–1335, July, 1997.     

制备参数对高比表面积介孔催化剂La-Co-Zr-O结构与性能的影响

采用双表面活性剂模板(十六烷基三甲基溴化铵和聚乙二醇辛基苯基醚的混合物)分解法制备了不同原子比(n_La+n_Co)/(n_La+n_Co+n_Zr)和不同温度焙烧的系列介孔混合氧化物催化剂La-Co-Zr-O。运用XRD、N₂吸附/脱附、XPS和H₂-TPR等技术对催化剂进行了表征，并以CO和C₃H₈氧化为模型反应，考察了组分配比和焙烧温度等参数对催化剂催化性能的影响。比表面积和孔径测试结果表明，样品具有很高的比表面积(108～266 m²·g^-1)和分布集中的孔径(3.4～3.9 nm)，Zr含量较高的样品比表面积较大。XRD结果表明，样品中的活性组分钴物种主要以Co₃O₄形式存在；XPS和H₂-TPR结果表明，样品中可还原的晶格氧的数量、活动度以及表面钴原子浓度均与催化剂对CO和C₃H₈的氧化性能密切相关。原子比为0.5的样品中，较多的晶格氧易于在相对低温下还原；而原子比为0.7的样品表面钴原子浓度较高，这使得两样品均表现出较高的催化活性。经650 ℃焙烧的样品仍保持较高的比表面积(108 m²·g^-1)和分布集中的介孔孔径(最可几孔径约3.8 nm)，且催化活性下降幅度也很小，表明该系列介孔催化剂具有优良的抗烧结能力和介孔热稳定性。